VAG 2.4/2.5D Sdi/Tdi/TDiCR- belt drive - Diesel engine setting/locking set, 50660
-
Code:2879
-
Weight:1.800 Kgs
Diesel engine setting/locking set - VAG 2.4/2.5D Sdi/Tdi/TDiCR- belt drive, 50660
This engine timing locking tools use for synhronization on Volkswagen 2.4D with engine codes AAB, AJA (02/95-03).
• The correct alignment is achieved by placing equal thickness of shims between both ends of the bracket and the cylinder head Camshaft Setting Strap is used to set the correct timing position of the camshaft.
• The centre Part of the bracket fits into the slotted end of the camshaft and the ends of the bracket located on the cylinder head.
• Injection Pump Pulley Setting Spigot is 15.4mm in diameter and is used on engines with a one piece injection pump sprocket.
• The crankshaft damper holding tool prevents the damper from rotating whilst unfastening and refastening the centre bolt.
• This tool should be used with 3/4" Dr. power bar. VW group 2.5TDi common rail diesel engines (belt) in VOLKSWAGEN LT Crafter BJJ, BJK, BJL and BJM engines.
Included:
Crankshaft Damper Holding Tool
Crankshaft Setting Strap
Injection pump setting spigot
Shims (2)
Tensioner Adjuster
Crankshaft Locking Pin
Applications: VW: Crafter (2006-2013), LT (1996-2006), Transporter (1990-2003)
OEM Tools: T10025/3248/3419, T50009, 2064, 2065A, 3355
2.4D: AAB, AJA
2.5D SDi: AGX
2.5D TDi: ACV, AHD, AHY, AJT, ANJ, APA, AUF, AVR, AXG, AXL, AYC, AYY, BBE, BBF
2.5 TDi CR: BJJ, BJK, BJL, BJM
2.5 BlueTDi CR: CEBA, CEBB, CECA, CECB
Made in China
Estimated Shipping
to Varna starts at
6.59лв.
outside Varna starts at
6.59лв.
to Varna starts at
4.43лв.
outside Varna starts at
4.62лв.
Quick Buy
Diesel engine setting/locking set - VAG 2.4/2.5D Sdi/Tdi/TDiCR- belt drive, 50660
This engine timing locking tools use for synhronization on Volkswagen 2.4D with engine codes AAB, AJA (02/95-03).
• The correct alignment is achieved by placing equal thickness of shims between both ends of the bracket and the cylinder head Camshaft Setting Strap is used to set the correct timing position of the camshaft.
• The centre Part of the bracket fits into the slotted end of the camshaft and the ends of the bracket located on the cylinder head.
• Injection Pump Pulley Setting Spigot is 15.4mm in diameter and is used on engines with a one piece injection pump sprocket.
• The crankshaft damper holding tool prevents the damper from rotating whilst unfastening and refastening the centre bolt.
• This tool should be used with 3/4" Dr. power bar. VW group 2.5TDi common rail diesel engines (belt) in VOLKSWAGEN LT Crafter BJJ, BJK, BJL and BJM engines.
Included:
Crankshaft Damper Holding Tool
Crankshaft Setting Strap
Injection pump setting spigot
Shims (2)
Tensioner Adjuster
Crankshaft Locking Pin
Applications: VW: Crafter (2006-2013), LT (1996-2006), Transporter (1990-2003)
OEM Tools: T10025/3248/3419, T50009, 2064, 2065A, 3355
2.4D: AAB, AJA
2.5D SDi: AGX
2.5D TDi: ACV, AHD, AHY, AJT, ANJ, APA, AUF, AVR, AXG, AXL, AYC, AYY, BBE, BBF
2.5 TDi CR: BJJ, BJK, BJL, BJM
2.5 BlueTDi CR: CEBA, CEBB, CECA, CECB
Made in China
Code: 52004
International shipment available. Please ask for price.
