NEGEL TOOL BOX

Opel/Vauxall и Chevrolet 2.0 SOHC 16V Diesel engine Timing tool kit, 50700

Developed for the late Vauxhall/Chevrolet 2.0 Common Rail diesel engine this kit holds the correct position of the camshafts and crankshaft whilst changing the timing belt on SOHC 16V engines.
Content:

• Crankshaft Locking Pin
• Camshaft Locking Tool

(OEM: EN-48245, EN-48246)
Models:

• Opel Antara 2.0 
• Opel Insignia 2.0
• Chevrolet Captiva 20lt VCDi 
• Chevrolet Cruze 20lt VCDi 
• Chevrolet Epica 20lt VCDi 
• Chevrolet Lacetti D 
• Chevrolet Nubira 2.0lt D 

Engine Codes: Z20DM; Z20DMH; LLW/Z20DMH; RA420; Z20S1, Z20S3; Z20S4; Z20S5; A20DTJ ...

Made in China

Diesel engine setting/locking set - VAG 2.4/2.5D Sdi/Tdi/TDiCR- belt drive, 50660

This engine timing locking tools use for synhronization on Volkswagen 2.4D with engine codes AAB, AJA (02/95-03).

• The correct alignment is achieved by placing equal thickness of shims between both ends of the bracket and the cylinder head Camshaft Setting Strap is used to set the correct timing position of the camshaft.
• The centre Part of the bracket fits into the slotted end of the camshaft and the ends of the bracket located on the cylinder head.
• Injection Pump Pulley Setting Spigot is 15.4mm in diameter and is used on engines with a one piece injection pump sprocket.
• The crankshaft damper holding tool prevents the damper from rotating whilst unfastening and refastening the centre bolt.
• This tool should be used with 3/4" Dr. power bar. VW group 2.5TDi common rail diesel engines (belt) in VOLKSWAGEN LT Crafter BJJ, BJK, BJL and BJM engines.
Included:
Crankshaft Damper Holding Tool
Crankshaft Setting Strap
Injection pump setting spigot
Shims (2)
Tensioner Adjuster
Crankshaft Locking Pin
Applications: VW: Crafter (2006-2013), LT (1996-2006), Transporter (1990-2003)
OEM Tools: T10025/3248/3419, T50009, 2064, 2065A, 3355
2.4D: AAB, AJA
2.5D SDi: AGX
2.5D TDi: ACV, AHD, AHY, AJT, ANJ, APA, AUF, AVR, AXG, AXL, AYC, AYY, BBE, BBF
2.5 TDi CR: BJJ, BJK, BJL, BJM
2.5 BlueTDi CR: CEBA, CEBB, CECA, CECB

Made in China

Extra long Oxygen sensor socket 22 mm, 50491

Material: CR-MO
Suitable for: BMW, Ford, Mercedes Benz C and E class (602, 605, 606 engines), Opel, Rover, VAG, Volvo, VW, Audi, Skoda, Seat.

1/2 ", Size: 22 mm, L = 150 mm

Piston ring compressor, 53-175 мм, 50090

High-quality spring steel wraps construction and tensioning mechanism.
Height: 75 mm (3 ")
Capacity: 53-175 mm (2-1 / 8 "to 7")
Supplied with quadrilateral key.

4mm Flexible magnetic pick up tool, 13006101A

Features:

Precision tool for removing broken debris and other metal parts and from glow plug apertures  and from hard-to-reach areas.

Diameter of magnet 4 mm

Working length - 380 mm

Origin: Taiwan

Engine Timing chain tool set - Vauxhall/Opel 1.0/1.4 Petrol, 011208962

Timing kit Vauxhall/Opel 1.0/1.4 for locking both camshafts in a timed position while the timing chain is being replaced
Application: Vauxhall/Opel Adam Astra-K, Corsa-E Turbo SIDI, EcoFlex, Turbo
Engine codes:
1.0lt:LE1/B10XFL, LE1/B10XFF, LE1/B10XHL, LE1/B10XFT
1.4LT: LV7/B14XE, LE2/B14XFL, LE2/B14XFT
OEM: EN-51367, EN-51298, EN-51632
Year 2014-2017

Made in Taiwan

Heavy Duty stud remove & install tool 1/2"Dr x 22 mm Hex, 03M1430100

Features: Removes corroded, broken, distorted studs or studs with a damaged thread or smooth stem.
Fit screw diameter: M6-M19
Grip: 1/2 "Dr. and 22mm hex driver
Material: Cr-V

Made in Taiwan

Engine timing tool set - Vauxhall/Opel и Chevrolet 2.0 SOHC 16V, 780-8220

Developed for the late Vauxhall/Chevrolet 2.0 Common Rail diesel engine this kit holds the correct position of the camshafts and crankshaft whilst changing the timing belt on SOHC 16V engines.

Content:

• Crankshaft Locking Pin
• Camshaft Locking Tool

(OEM: EN-48245, EN-48246)
Models:

• Opel Antara 2.0 
• Opel Insignia 2.0
• Chevrolet Captiva 20lt VCDi 
• Chevrolet Cruze 20lt VCDi 
• Chevrolet Epica 20lt VCDi 
• Chevrolet Lacetti D 
• Chevrolet Nubira 2.0lt D 

Engine Codes: Z20DM; Z20DMH; LLW/Z20DMH; RA420; Z20S1, Z20S3; Z20S4; Z20S5; A20DTJ

Code: 520042

Made in Taiwan

10 mm Hex key, M100SHK3AS1L

Material: Cr-V, satin finished

Length short arm: 48 mm

Length long arm: 122 mm

Made in Taiwan

CV Joint clamp banding tool with cutter, 096-81433

Tool is easy removed by sliding sideways after winding has been completed.

Use to install and tighten the "band-it" or strap style clamps on CV joint boots or on power steering rack and pinion steering gear boots.
Once installed into the tool tighten the band by turning the handle on the tool;
Use a socket or wrench on the handle to torque the band to OE specifications.
When the boot clamp has been tightened to specs cut the band to the correct length by flipping the lever (at the front of the tool) forward.
Features:
CV joint boot clamp wrench securely fastens band-it style free-end clamps
Roll band clips and pre-formed CV boot clamps
Use by turning the winding mandrel with a 1/2-inch socket or wrench
Measures 11-1/2 inches long
Works on All CV Boot Clamps, ATV,  UTV and some automotive applications.

Lower ball joint socket for Peugeot/Citroen, 210-0215-60

Features:
Suitable for removal of OEM and after market lower ball joints on Peugeot and Citroen.
Profile: 60mm x 38 mm
Length: 45 mm

Made in Taiwan

Heavy duty CVboot clamps plier for driveshaft, 50111

Application: To install of new stainless steel clamp-bands on drive-shafts where torque setting is required.
Material: Cr-Mo, chrome plated
Length: 270 mm
Maximum opening size of the jaw: 42 mm
Torque: 23-30 Nm
Suitable for VW, Audi, Seat, Skoda, Opel / Vauxhall and Ford.

Made in China

6 pcs Slide hammer injector puller set for Mercedes Benz CDI engines

Designed for fast and professional remove of Mercedes-Benz car injectors without the need to remove the cylinder block.
Components made of CR-Mo and S45C steel.
Suitable Mercedes with CDI engines.
Application: For Mercedes-Benz CDI engines 611.612.613, etc.

Doube end spanner head 1/4" Dr., 1488-06

Lenght: 150 mm

Made in Taiwan