bmw

10 pcs BMW Locking Wheel Nut Key Set, 50102

Master set for BMW vehicles
Tamper Proof type
Use with a 17mm socket
Sizes:
#11/5 point
#12/14 point
#13/16 point
#14/12 point
#15/11 point
#16/10 point
#17/7 point
#18/13 point
#19/8 point
#20/9 point

Made in China

BMW High Pressure Pump and Crankshaft Locking Tool(B series), 50538

Specially designed to fixing and lock high pressure pump to crankshaft when replacing timing chain.
Applicable: BMW B37, B47, B57, B38, B48 engine.
OEM No.: 242082

Made in China

Crankshaft pulley holding tool BMW 3/5 Series, 846-8083А

Features:
Holds vibration damper when loosening or tightening centre crankshaft bolt.
Applicable: BMW 3 series E46 (1998 - 2007), 5 series E39 (1996 - 2003)
BMW E81 120d 163PS
BMW E46 318d 116PS - 318td 115PS - 318dt 115PS - 318d, 115PS - 320d 136PS - 320td 150PS - 320d 150PS
BMW E90 318d 150PS - 320d 150PS - 320d 163PS
BMW E91 318d 122PS - 320d 150PS - 320d 163PS
BMW E39 520d 136PS
BMW E60 520d 163PS - 520d 150PS
BMW E61 520d 150PS - 520d 163PS
BMW X3 E83 2.0d 150PS
OEM No. 11 6 310 (11 6 311 holder, 11 6 312 centring tube)
Centering tube OD: 60mm, ID: 49mm

Made in Taiwan

Mercedes Benz /BMW Oil pan wrench, 846-7157

A wrench designed specifically to service the driveline fluids on most BMW and Mercedes Benz vehicles.
The 14-mm Allen end services the fill and drain plugs on the transmission and differential housing. The low-profile design allows access where restricted space does not allow the use of a conventional socket. The 17-mm box end services the oil drain plug.

BMW: Most vehicles since 1990
Mercedes Benz engine types: 102.92/93/96/98/99, 103, 104, 110.92/98/99, 112, 113, 116, 117, 119, 120, 266, 275, 285, 601, 602.91/93/94/96, 603.91/93/96/97, 604, 605, 606, 615, 616, 617.91 /95
Mercedes transmission types: 716, 717, 722, 63

Made in Taiwan

BMW/Mini - Camshaft Drive Chain Wear Indicator , 50877

Features: For checking the timing chain stretch without dismantling the engine.
Applications: Mini Clubman, Clubvan, Countryman, Coupe, Paceman, Roadster with 1.4L and 1.6L engines.
Engine code:
N12 B14AB, N12 B14, N12 B16A, N16 B16A, N16 B16M0, N16 B16U0, N16 B16A/M0, N16 B16K0, N16 B16A/MO, N18 B16A, N18 B16A/M0, N18 B16C, N18 B16A/MO, N18 B16M0, N18 B16C/TO.
OEM#: 2 353 281

Made in China

BMW N47 High Pressure Pump and Crankshaft Locking Tool, 50534

The BMW N47 high pressure pump and crankshaft locking tool is specially designed to position and lock high pressure pump to crankshaft when replacing timing chain.

Application: BMW N47 engine.

OEM No.: 2285671

Made in China

BMW N47; N57 Crankshaft Pulley Holder, 50531

Used for dismantling and replacing the damper disc on BMW N47; N57.
For fixing  the crankshaft pulley when loosening or tightening the center pulley bolt.
OEM No. 117220

Made in China

BMW S54 Engine Camshaft Timing Tool Set, 50526

Description:
OEM 11 9 140 - Valve timing checking tool
OEM 11 9 130 - Camshaft Setting Tool
OEM 11 7 342 - Camshaft setting tool pins
OEM 11 7 160 - VANOS alignment lever
OEM 11 2 300 - Crankshaft Locking Pin
OEM 11 9 170 - VANOS Spacers
Application:
BMW M3 Cabriolet 2000-2006, M3 Sports Coupe 1999-2006, M3 CSL Sports Coupe 2003-2004
Plus Z3 (M) E36 2000 onwards, Z4 (M) E85/E86 2006 onwards

Made in China

BMW N20 N26 1, 2, 3, 4 Series - Balance Shaft & Oil Pump Alignment Tool Kit, 50790

Function : For aligning the balancer shaft and holding the chain sprocket for removing and installing the oil pump or chain during chain repairs. Constructed with high standard Steel, which has an unparalleled lifespan with great durability.
Applications:
BMW 1 Series (2012-2016), 2 series (2014-2016), 3 series (2012-2016), 4 series (2014-2016), X1 (2011-2015), X3 (2011-2017), X4 (2014-2017), Z4 (2011-2017)
Engine codes: N20 and N26 1.6L/2.0L petrol engines
OEM No. 2 212 825, 2 318 117, 11 4 120

Made in China

BMW B37/B38 – Balance Shaft Removal Alignment Tool, 50896

Basic tools for required to remove, replace and time the balance shaft on the new BMW 1.5, 1.2 and 1.5 petrol engines.
Application: Mini Clubman 2015 - 2017, Mini Convertible 2016 - 2017, Mini Clubman 2015 - 2017, BMW 1 and 3 series 2015 - 2017, 2 series 2014 - 2017, X1 2015 - 2017, i8 2015 - 2017
Engine codes:
B37 (diesel engines), B38 (petrol engines)
OEM tools: 2,288,943, 2,288,942 and 2,358,646

Made in China

BMW N13, N18 – Engine timing tool set, 50624

Features: For fixing the camshaft to TDC position for N13 and N18 1.6 petrol engines of the 2012 BMW 114i, 116i, 118i, 316i and Mini Cooper.
Contents:
1-1) 11-7-440 – For fixing the camshaft at TDC position
1-2) 11-7-440 – For fixing the camshaft at TDC position
1-3) 11-7-440 - Bolt (3 pcs.) For fixing the camshaft at TDC position
2) 496-709 - Alignment pin for fixing the crankshaft in TDC position
3) 11-9-340 - Chain tensioner: For tensioning the timing chain.
4) 119-590 - Crankshaft localization tool in GMT position
Application:
BMW 114i (2012-2015); BMW 116i (2012-2015); BMW 118i (2011-2015); BMW 316i (2012-2015)
Mini Cooper S (R56/57) (2010-2015)
Mini Coupe Cooper S (R58) (2012-2015)
Mini Roadster (R59) (2012-2015)
Mini Countryman (R60) (2012-2016)
Mini Paceman (R61) (2013-2017)
Mini Clubman (R55) (2011-2014)
Peugeot 207, 308
Citroen C3, c3 DS3 Vti, Picasso DS3, C4 VTi, C4 Picasso
Engine codes:
BMW: N13 B16A; N18 B16/M0; N18 B16A; N18 B16A/M0; N18 B16A/MO; N18B16C; N18B16C/TO; N18B16M0
Peugeot: EP3, EP6
Citroen: 8FR, 5SF

Made in China

BMW N47/B47/B48 Balance shaft Alignment tool, 50342

Purpose:
Designed to lock the balancing shafts in the correct position when repairing BMW N47, B47 and B48 engines.
Application: B47 / N47 / B48 engines in series 1, 2, 3, 4 and 5, X1, X3, X4, X5, Mini Clubman, Mini Hatch.
OEM No. 11 8 750; 2 288 054

Made in China

BMW B38; B48; B46 Engine timing tool set, 50665

Engine Camshaft Timing Tool Set For  BMW  B38, B46, B48 & B58 Turbo 3, 4 & 6 Cylinder Engines
Features: To replace the cylinder head gasket, to disassemble and install the camshaft / camshaft torque.
Checking and synchronizing the engine.
Application: BMW B38, B46, B48
Models:
F55 / F56 Mini One First after 2014 including
F55 / F56 Mini One 2014-2018
BMW F45 / F46 216i Active Tourer / Gran Tourer after 2015 including
F55 / F56 Mini One after 2018 incl
BMW F20 / F21 116i after 2015 incl
100kW (134hp) version:

BMW F20 / F21 118i after 2015 incl
BMW F22 / F23 218i Coupe / Convertible after 2015 incl
BMW F45 / F46 218i Active Tourer / Gran Tourer after 2014 incl
BMW F30 / F31 318i after 2015 incl
BMW F48 X1 sDrive18i [11] after 2015 inclusive
F55 / F56 Mini Cooper after 2014 inclusive
F54 Mini Clubman after 2015 inclusive
F60 Mini Countryman after 2017 incl
F39 X2 sDrive18i after 2017 incl
Cooper S Clubman - R56 chassis - N18 engine after 2011 incl
Cooper S Hatchback - R55 chassis - N18 engine after 2011 incl
Cooper S convertible - chassis R57 - N18 engine after 2011 incl
BMW
F20 114i after 2012 incl
F20 116i after 2011 incl
F30 316i after 2012 incl
F20 118i after 2011 incl
F30 320i Efficient Dynamics Edition after 2012 incl
BMW number: 2360895, 116480, 2288380, 2358122, 119340, 118580, 2365488

Made in China

BMW N20 N26 Engine timing tool set, 50125

The kit includes a set of tools needed to timing the newer BMW N20, N26 4-cylinder turbo engine.
OEM tools: 212 831, 119 340, 212 830 and 219 548
Content:
Tool for locking the camshaft for N20 / N26
N20 / N26 camshaft fixing base
Aligning pin for N20 / N26
Chain tensioner for N40, N42, N45, N46, N52, N55, N62
Application:
Engine N20 and N26 (4 cylinder turbo engine)
2011-present E84 X1 xDrive/sDrive20i
2011-present F25 X3 xDrive20i
2012-present F30 320i
2013-present F34 320i GT
2012-present F10 520i
2011-present E89 Z4 sDrive20i
2012-present F20 125i
2011-present E89 Z4 sDrive28i
2011-present E84 X1 xDrive/sDrive28i
2012-present F25 X3 xDrive28i
2011-present F30 328i
2012-present F10 528i
2013-present F34 328i GT
Engine Codes: 2.0: N20 B20, N20 B20A, N20 B20O0, N20 B20B / U0, N20 B20B, N26 B20, N26 B20A

BMW N63/S63 Camshaft alignment tool set,  50118

Features:
Special designed to fixing the camshaft in TDC position. Checking and adjusting the timing chain tensioner.
Application:
For BMW N63 engine (After Sep. 2012)
For BMW S63 Engine:
S63B44O0
E70 X5M (2010-2013)
E71 X6M (2010-2013)
Wiesmann GT MF5 (2011-present)
S63B44T0
F10 M5 (2011-present)
F12 M6 (2012-present)
F13 M6 (2012-present)
F06 M6 Gran Coupe (2013-present).
OEM Number:
    83302249117 (#2249117)
    83302249140 (#2249140)
    83302249144 (#2249144)
    83302249159 (#2249159)
    83302249162 (#2249162)
    11 8 570 Vibration Damper Lock
    11 9 190 Plug Mandrel / Timing Pin

Made in China