INJECTOR TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
Citroen/Peugeot 2.0/2.2HDi 16V - Diesel injector Puller set, 50638
Diesel injector Puller set Citroen/Peugeot 2.0/2.2HDi 16V
Diesel injektor puller set to remove locked injectors without removing the cylinder head of Citroen and Peugeot 2.0 and 2.2 HDI engines
Engine code:
DW10ATED4(RHM), DW10ATED/L4(RHT), DW10JATED4(RHW), DW12ATED4/L4(4HW)
Included:
Massive bridge matches perfectly on the cylinder head preventing any damage to the engine block.
Screw M17x1.0 mm
Screw M25x1.0 mm
Nut puller
Bearing plate with bearing
Short and long pins
Injector Sockets 25mm, 29mm
Adapter for pullers
Made in China
22 pcs Injector shaft cleaning set, 01110A916
22 pcs Injector shaft cleaning set, 01110A916
Features:
To clean the injector shafts and seat as well as the injector surface.
4 pcs Diesel injector socket set, 50322
4 pcs Diesel injector socket set, 50322
Special socket for removing and installing of diesel injectors.
Set contains:
1 pc 1/2" Dr. x 22mm(6 point ), 110mm long.
1 pc 1/2" Dr. x 22mm(12 point ), 80mm long.
1 pc 1/2" Dr. x 27mm(12 point ), 80mm long.
1 pc 1/2" Dr. x 28mm(12 point ), 78mm long...
Injector puller set for VAG (Audi / Seat / Skoda / VW), 50363
Injector puller set for VAG (Audi / Seat / Skoda / VW), 50363
Features: Designed to extraction, installation and service for FSI injectors and most diesel engines installed in VW, Audi, Seat, Skoda.
Material: CR-Mo and S45C steel
Applicable: FSI petrol engine 1.4, 1.6, 1.8, 2.0, 2.7 V6; 3.0 V6; 3.2 V6; 3.6 V6 и 4.2 V8 ...
Fuel injection test set, 50199
Fuel injection test set, 50199
The car fuel pressure diagnostic kit is suitable for most vehicles with a fuel injection system with petrol or gas engines (except Bosch, CIS Jetronic, Throttle Body Systems on GM cars).
Not suitable for diesel engines with high pressure injection pump or direct injection engines due to the low pressure range of the manometer.
Fuel pressure testing is an essential part of the fuel injection system troubleshooting process.
Contents:
The set is equipped with various fittings and connection hoses for testing.
15 "length hose is used for direct connection to 1/4" SAE standard fuel pump shredder valve
An 8 "length hose is for the M6 fuel pressure test hole, and there are also adapters M8; M10; M12; M14 for the corresponding test port on fuel rail.
Aluminum tee to support the connection between the fuel pump and the engine for most cars.
Manometer, protected with a rubber shell, with a diameter of the dial 3-1 / 2 ", with a range of 0-10bar (0-140psi) and two-color coded scale for easy reading. The hoses use rubber nylon resin and the built-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16 "fuel drain hose help to safely release the pressure and easily restore the fuel.
Fuel pump pressure check:
The manometer is designed to easily and quickly check the pressure of the fuel injection pump and the fuel flow.
You can compare the pressure value with the manufacturer's recommended reference range to help diagnose the petrol engine system.
Low fuel pressure can be caused by kink/leak/clog on inlet supply side components, a bad fuel pump or regulator, low tank pressure
High fuel pressure may be caused by a bad fuel pressure regulator or kincked outlet return line.
Made in China
27 mm 1/2"Dr. HDI Engines Diesel Fuel Filter socket, 50640
27 mm 1/2"Dr. HDI Engines Diesel Fuel Filter socket, 50640
Specially designed for easy disassembly of the fuel filter without damaging the plastic cover. Allows to be tightened to the corresponding torque, preventing air leakage and other malfunctions. It saves time.
Application:
Citroen C4 2.0 HDi 16V, C4 Picasso 2.0 / 2.2 HDi. C5 /, C8 2.0 / 2.2 HDi 16V, Jumpy 2.0 / 2.2 HDi
Fiat: Scudo / Ulysse Mk II 2.0 JTD 16V
Ford Focus / Focus C-Max / Galaxy / Kuga / S-Max 2.0 TDCi
Peugeot: 307/308/407/607/807 / Expert 2.0 HDi 16V
Volvo: C30 / C70 / S40 Mk II / V50 2.0 Diesel (136 HP)...
27 mm 1/2"Dr. HDI Engines Diesel Fuel Filter socket, 9G0123
27 mm 1/2"Dr. HDI Engines Diesel Fuel Filter socket, 9G0123
Specially designed for easy disassembly of the fuel filter without damaging the plastic cover.
Allows to be tightened to the corresponding torque, preventing air leakage and other malfunctions.
It saves time
Diesel Injector extractor set, 50633
Diesel Injector extractor set, 50633
For removal of diesel injectors
Various adaptors make the kit suitable for most diesel injectors
Includes also the following components:
M14 x 1.5 for Delphi adaptor
M17 x 1 for Bosch adaptor
M20 x 1 for Denso adaptor
M25 x 1 for Siemens adaptor
M27 x 1 for Siemens adaptor
M27 x 1 for Bosch injector nozzle adaptor
Puller with M14 x 1.5P
3 x different slide hammers:
1.6 kg, 160 mm length
2.7 kg, 460 mm length
5.1 kg, 600 mm length
2 x pulling claws with fork opening:
13.7 x 18 mm, 105 mm length
12.7 x 19 mm, 130 mm length
5 x Oxygen Sensor slotted 6-pt 1/2" sockets, 100 mm length sizes 25 - 27 - 28 - 29 - 30 mm
Injector extractor, sleeve design, with shells outer diameter 35 mm, internal diameter 29 mm, M17 x 1.0 spindle
Pulling adapter with external thread M27 x 1.0 (3pcs) and M25 x 1.0
Pulling adapter with internal thread M27 x 1.0 (3pcs)
Sliding hammer adapter for inner, outer and claw extractor.
Made in China
Diesel injector copper washer remover install tool, 50629
Diesel injector copper washer remover install tool, 50629
Size: inner hole 7mm
- Designed for use on most Common Rail CDI injectors to remove copper washer sealing the base of the injector.
- Suits most European cars using Bosch CDI fuel injection
- Handy screw thread and expanding jaw design
- Remove and install the copper washers on diesel injectors quickly and effectively with this special tool.
- The reach of 230mm long is designed to install copper washers on deep seated injectors.
- For removing and installing the copper wires on diesel injector.
- Quick & effective. Reach - 230mm.
For deep seated injectors.
Manufactured from Chrome Vanadium...
BENZ truck diesel injection valve socket, AN040062
BENZ truck diesel injection valve socket, AN040062
The tool remove and install diesel injection valve.
Application: MAN (422, 403) BENZ Truck, SCANIA
7 pcs VAG TDI Injector puller set, 50347
7 pcs VAG TDI Injector puller set, 50347
Description: Design to remove diesel injectors from the VAG TDI engines
Applicable: For VW, AUDI TDI with engine code ALH, AHU, IZ, SEAT and SKODA
Including:
1.4 SDI / TDI; 1.9d / SDI / TDI / TDI (pd); 2.0TDI (pd) и (pd4); 2.5tdi; 2.5tdi (pd); 2.8tdi (pd) 2.7 / 3.0 TDI (common rail); 4.2tdi (common rail)
Made in China
Diesel injector puller, 50357
Diesel injector puller, 50357
Specially designed for the removal of stubborn diesel injector fitteds CDI engines.
Features injector car removal socket, secutity hex key for removing the inner part of the inejector and a puller to remove the injector without damaging thr cam cover.
The engine type is fitted mainly to C-class, E-class and Sprinter vehicles.
The housing for the puller is recessed to fit the injector recess.
Applicable: For MercedesC-class, E-class, Sprinter vehicles and Crysler Grand Cherokee 27 crd(00-)
Made in China
Diesel Injector puller, 50301
Diesel Injector puller, 50301
Assists removal of subborn Bosch and Lucas diesel injectors.
Saves time & money when injectors are difficult to remove.
With M8x0.75; M12x1.5 and M14x1.75 adaptors.
Flow Meter Set For Common Rail Diesels With 24 pcs adapter, 50183
Flow Meter Set For Common Rail Diesels With 24 pcs Adapter, 50183
Features: For use on up to 6 Injectors. Measures the amount of fuel the injectors return to the deposit tank.
Measures the amount of fuel the injectors return to the deposit tank.
It can identify damaged or clogged injectors quickly and easily
Direct measurement of return flow of the injector, using external flow meter.
24 adaptors for Bosch-01, Siemens-02, Denso-03 and Delphi injectors.