INJECTOR TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Air powered tool that uses vibrations and 20-30Nm of torque to remove especially tight or seized injectors.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
VAG with 1.6 TDi engines - Diesel injector remover, 011108019
VAG with 1.6 TDi engines - Diesel injector remover, 011108019
Applicable: Engines: 1.6L CRTD diesel.
OEM Tools: T10402, T10055.
Use according to OEM instructions.
No solenoid removal is required.
Made in Taiwan
Valve spring compressor lever type OHV/OHC engines, 50117
Valve spring compressor lever type OHV/OHC engines, 50117
Suitable for replace springs and valve stem oil seals.
It is not necessary to remove the cylinder head.
With its adjustable handle, claws and hooks, the tool can be used on most OHV / OHC engines.
Applicable to two-shaft drive engines.
Can be used in hard-to-reach places.
Made of high-grade steel No. 50.
N.W.: 700 g
Fuel system tool set Force 67101
Fuel system tool set Force 67101
General application for Jaguar, Lotus, Land Rover, Saab, Ford, Opel, Volvo, Nissan, Subaru, Toyota, Mitsubishi, ect.
1. 3 mm HEX- Zenith (Stromberg) 150 CD3, Jaguar, Lotus, MG, Land Rover, Range Rover and Saab
2. 145 mm Flexible extension bar
3. Handle
4. Bit set:
- Т20: Ford W Carbs, fuel pumps ect.
- 3 mm Hex: "K" Jetronic
- 5 mm Hex: "L" Jetronic
- Slotted: 3 и 5 мм
- Phillips: PH1; PH2
- Pozidriv: PZ1; PZ2
- Bit adaptor 1/4" HEX- 1/4" Sq.
5. 95 mm Extension bar
6. Ford - Weber TLDM, DFTM, 2V, TLM, TLD, DFT и др.; Forf Fiesta, Escort и Orion 1989
7. 17 mm (0.6") - SU/SU HIF Rover mini and Maestro
8. 0.34", 1/2" - SU/SU HIF Rover mini and Maestro
8. Zenith CD, Opel/Vauxhall
10. Zenith (Stromberg) CD, Land Rover, Saab, Vauxhall and Volvo
11. Nikki, Hitachi, Nissan and Subaru
12. Zenith
13. Aisan and Mikuni, Toyota and Mitsubishi
3 pcs Fuel line disconnect set, EN903G2
3 pcs Fuel line disconnect set, EN903G2
Colour coded handles for quick and easy size identification
Manufactured from chrome molybdenum for maximum strength and durability
PVC dipped handles for comfort and grip
Suitable for 6mm, 8mm, 10mm (1/4”, 5/16”, 3/8”) fuel lines...
Fuel Injection test kit, 50195
Fuel Injection test kit, 50195
Description:
10 pcs Diesel fuel engine timing set, 50333
10 pcs Diesel fuel engine timing set, 50333
This precision measuring instrument is designed for resetting the timing position on diesel engines with the following fuel pumps: BOSCH/EP/ VE ROTORY, KIKKI, NIPPON, DENSO, CAV ROTODIESEL
Top entry these fuel pumps will be found on the following vehicles with diesel engines:
Alfa Romeo, Audi, BMW, Daihatsu, Fiat, Ford, Suzuki, Iveco, Lancia, Land Rover, Mazda, Mitsubishi, Nissan, Renault, Rover, Vauxhall, VW etc.
Made in China
Adjistable fuel tank lid remover, 50909
Adjistable fuel tank lid remover, 50909
Working with combination wrench 16 mm
Working Range 100 - 170 mm
Made in China
Valve spring compressor, 62106
Valve spring compressor, 62106
- Compresses overhead valve springs with rocker arm studs;
- This tool can be sed with the head either on or off the engine;
- Jaws adjust to fit most overhead valve engines;
- Adjustable handle allows for clearance in tight areas.
Valve stem seal pliers, 50106
Valve stem seal pliers, 50106
Use the reach into confimed area for removal of valve seal.
Serrated tip for better grasp of valve seal regardless of its configuration.
Valve spring compressor, 62112
Valve spring compressor, 62112
- To disassemble and assemble the valve springs with the head fixed or detached from the engine
- Fits 3/8 '' and 7/16 '' 'Rocker Studs'
- Suitable for springs with a diameter of 1 '' - 2 ''
- Press down to compress the oil spring, remove the valve holders and slowly release...
Valve spring compressor, 058-6231
Valve spring compressor, 058-6231
- Designed to compress valve springs on overhead valve engines
- Unique, direct action compressor lever gives better visibility of valve spring retainers located in difficult access areas
- Jaw opening of 35 mm to 200 mm and throat clearance of 250 mm.
Made in China
2 pcs Vacuum cup valve grinder, 50104
2 pcs Vacuum cup valve grinder, 50104
For hand use, grinding flat head, unslotted valves.
Suitable for small and large vehicles.
Hardwood handles for easy hand lapping of engine valves.
• Synthetic rubber vacuum cups are resistant to oil, grease, gasoline and are replaceable.
• 1-1/8” & 1-3/8” dia. cups.
• 5/8” & 13/16” dia. cups.
Overhead valve spring compressor, 50109
Overhead valve spring compressor, 50109
Description: This overhead valve spring compressor is ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompressing the tool then remove spring. It features a reversible jaw / adaptor and automatic cam-action locking to a re-determined setting.
Specifications:
Easy to operate
Cam action level design for secure valve spring locking into the tool
Allow valve springs and valve stem oil seals to be replaced with the cylinder head
Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications
For use on a wide range of OHV, OHC and CHV engines.
Not suitable for use on engines with deep seated valves
Made in China
Valve spring compressor master set, 50103
Valve spring compressor master set, 50103
Applicable to: OHV & OHC gas or diesel engines of the following vehicles:
Audi (4 and 5 cylinder), BMW, Chevrolet, Chrysler, Ford, GMC, Honda, Hyundai, Infiniti, Lexus, Lincoln, Mazda, Mitsubishi, Nissan, Porsche (924, 928), Saturn, Volkswagen , (4, 5, 6-cylinder) as well as for most other engines with available valve springs for valves...