BMW

BMW M52TU/M54/M56 - Crankshaft Pulley Holding Tool, 50296

Features: For BMW 6 Cylinder Engine M52TU / M54 / M56
Tool is designed to hold the crankshaft pulley stationary while loosening or tightening the center screw.
It can safely remove the pulley and won't damage the pulley shock - proof function.

Application: BMW (M52, M54, M56).

Made in China

BMW - Differential Front Bush Extractor F Series, 50954

Features: This tool is used to extract and install the transversely mounted differential mounting bushing that is located in the rear subframe.
The service work can be performed on-car without the removal of the subframe.
Applicable:
BMW F01 — (2008–present) 7 Series
BMW F02 — (2009–present) 7 Series long wheelbase
BMW F04 — (2011–present) 7 Series ActiveHybrid
BMW F06 — (2011–present) 6 Series Gran Coupe/M6 Gran Coupe
BMW F07 — (2009–present) 5 Series Gran Turismo
BMW F10 — (2011–present) 5 Series Sedan/M5 Sedan
BMW F11 — (2012–present) 5 Series Touring
BMW F12 — (2011–present) 6 Series Coupe/M6 Coupe
BMW F13 — (2011–present) 6 Series Convertible/M6 Convertible
BMW F18 — (2010–present) 5 Series long wheelbase

Models: BMW F01 / F02 / F06 / F07 / F10 / F11 / F13

OEM Bush number: 33316792873

Made in China

Mercedes & BMW Ignition Lock Set, HS-E3417

Complete kit for removal and installation for Mercedes and BMW motor vehicles.
Stored in a plastic case.
Includes:
2pcs x Instrument cluster removal hooks for models: 107, 116, 123, 124, 126, 140 & 201.
2pcs x Radio removal tools for 1992 and newer Mercedes vehicles Models: 140, 129, 202 & 210.
2pcs x Ignition lock removal tools for models W124 & 201.
2pcs x Ignition lock removal tools for models W124, 126 & 201.

Made in China

BMW N-series Crankshaft Locking Tool, 50575

Used to lock crankshaft when releasing or tightening the central bolt.
Suitable for BMW N12, N14, N40, N42, N45, N46, N52, N52, N53, N54 engines.
OEM#: 11 9 280

Made in China

BMW N20/N26 Flywheel Locking Tool, 50570

Description:
Great for Replacing The Timing Chain.
Works on BMW N20 and N26 engines.
Used for securing the crankshaft with the transmission installed(connected to engine)
Comparable to BMW Factory Tool No. 83302222742
(Note: Automatic transmissions only.)
Features:
While replacing the timing chain, this tool can hold the flywheel;
It helps to release and tighten down the central bolts on the vibration damper.
Application:
BMW 125i N20 2012-2017;
BMW 220i N20 2014-2018
BMW 225i N20 2014-2017
BMW 228i N20 2014-2016
BMW 320i N20 2012-2015
BMW 320i GT N20 2013-2016
BMW 328i N20 2011-2016
BMW 328i GT N20 2013-2016
BMW 520i N20 2011-2016
BMW 520Li N20 2013-2016
BMW 525Li N20 2013-2016
BMW 528i N20 2011-2017
BMW X1 xDrive/sDrive20i N20 2011-2015
BMW X1 xDrive/sDrive28i N20 2011-2015
BMW X3 N20 2013-2018
BMW X3 xDrive20i N20 2011-2018
BMW X3 xDrive28i N20 2012-2018
BMW X4 xDrive20i N20 2014-2017
BMW Z4 N20 2013-2015
BMW Z4 sDrive20i N20 2011-2016
BMW Z4 sDrive28i N20 2011-2016
BMW 328i / 328iX N26 2012-2016
BMW 228i / 228iX N26 2012-2016

Made in China

BMW M40, M70 - Engine timing tool set, EN9G1212
Features:
This kit will service a wide range of older BMW both petrol belt & chain driven engines.
Used to align/lock camshaft in cylinder 1 TDC firing position duringchain removal & replacement.
2 pieces are recommended for V12 camshaft assembly (though not required.)
Content:
Camshaft alignment tool
Flywheel timing pin
Models:
BMW 3 Series (E36/E46): 316i (1993-2004), 316i Compact (1998-2001), 318i (1993-2001)
BMW 5 Series (E34): 518i (1994-1996)
BMW Z Series (E36): Z3 1.8 (1996-2003), Z3 1.9 (1996-2003)
Engine Codes:
1.6: M43; 16 4E 2, 16 4E 3
1.8: M43; 18 4E 2
1.9: M43; 19 4E 1
OEM №: 11.2.300, 11.3.190

Made in Taiwan

BMW/Opel/Vauxhall - Camshaft Gear Alignment Tool, 50876

Designed to clamp onto the gear and hold the 2 gear halves in alignment so making the assembly and disassembly easier.
For Vauxhall 1.3 CDTi (B13) diesel camshafts and BMW B37 1.5 Diesel Balance shaft gears.
Applications:
BMW 1.5 Diesel 1 Series 2015<, 2 series 2014<, X1 2015<, BMW Mini One 2014<
Engine codes: B37C15A, B37D15A
Opel / Vauxhall Corsa E, 1.3 Diesel from 2015.
Engine codes: LKU/B13DTE, LKU/B13DTR, LKV/B13DTC
OEM#: 11 5 370 / EN-50509

Made in China

BMW High Pressure Pump and Crankshaft Locking Tool(B series), 50538

Specially designed to fixing and lock high pressure pump to crankshaft when replacing timing chain.
Applicable: BMW B37, B47, B57, B38, B48 engine.
OEM No.: 242082

Made in China

Crankshaft pulley holding tool BMW 3/5 Series, 846-8083А

Features:
Holds vibration damper when loosening or tightening centre crankshaft bolt.
Applicable: BMW 3 series E46 (1998 - 2007), 5 series E39 (1996 - 2003)
BMW E81 120d 163PS
BMW E46 318d 116PS - 318td 115PS - 318dt 115PS - 318d, 115PS - 320d 136PS - 320td 150PS - 320d 150PS
BMW E90 318d 150PS - 320d 150PS - 320d 163PS
BMW E91 318d 122PS - 320d 150PS - 320d 163PS
BMW E39 520d 136PS
BMW E60 520d 163PS - 520d 150PS
BMW E61 520d 150PS - 520d 163PS
BMW X3 E83 2.0d 150PS
OEM No. 11 6 310 (11 6 311 holder, 11 6 312 centring tube)
Centering tube OD: 60mm, ID: 49mm

Made in Taiwan

BMW/Mini - Camshaft Drive Chain Wear Indicator , 50877

Features: For checking the timing chain stretch without dismantling the engine.
Applications: Mini Clubman, Clubvan, Countryman, Coupe, Paceman, Roadster with 1.4L and 1.6L engines.
Engine code:
N12 B14AB, N12 B14, N12 B16A, N16 B16A, N16 B16M0, N16 B16U0, N16 B16A/M0, N16 B16K0, N16 B16A/MO, N18 B16A, N18 B16A/M0, N18 B16C, N18 B16A/MO, N18 B16M0, N18 B16C/TO.
OEM#: 2 353 281

Made in China

BMW N47 High Pressure Pump and Crankshaft Locking Tool, 50534

The BMW N47 high pressure pump and crankshaft locking tool is specially designed to position and lock high pressure pump to crankshaft when replacing timing chain.

Application: BMW N47 engine.

OEM No.: 2285671

Made in China

BMW N47; N57 Crankshaft Pulley Holder, 50531

Used for dismantling and replacing the damper disc on BMW N47; N57.
For fixing  the crankshaft pulley when loosening or tightening the center pulley bolt.
OEM No. 117220

Made in China

BMW S54 Engine Camshaft Timing Tool Set, 50526

Description:
OEM 11 9 140 - Valve timing checking tool
OEM 11 9 130 - Camshaft Setting Tool
OEM 11 7 342 - Camshaft setting tool pins
OEM 11 7 160 - VANOS alignment lever
OEM 11 2 300 - Crankshaft Locking Pin
OEM 11 9 170 - VANOS Spacers
Application:
BMW M3 Cabriolet 2000-2006, M3 Sports Coupe 1999-2006, M3 CSL Sports Coupe 2003-2004
Plus Z3 (M) E36 2000 onwards, Z4 (M) E85/E86 2006 onwards

Made in China

BMW N20 N26 1, 2, 3, 4 Series - Balance Shaft & Oil Pump Alignment Tool Kit, 50790

Function : For aligning the balancer shaft and holding the chain sprocket for removing and installing the oil pump or chain during chain repairs. Constructed with high standard Steel, which has an unparalleled lifespan with great durability.
Applications:
BMW 1 Series (2012-2016), 2 series (2014-2016), 3 series (2012-2016), 4 series (2014-2016), X1 (2011-2015), X3 (2011-2017), X4 (2014-2017), Z4 (2011-2017)
Engine codes: N20 and N26 1.6L/2.0L petrol engines
OEM No. 2 212 825, 2 318 117, 11 4 120

Made in China

BMW B37/B38 – Balance Shaft Removal Alignment Tool, 50896

Basic tools for required to remove, replace and time the balance shaft on the new BMW 1.5, 1.2 and 1.5 petrol engines.
Application: Mini Clubman 2015 - 2017, Mini Convertible 2016 - 2017, Mini Clubman 2015 - 2017, BMW 1 and 3 series 2015 - 2017, 2 series 2014 - 2017, X1 2015 - 2017, i8 2015 - 2017
Engine codes:
B37 (diesel engines), B38 (petrol engines)
OEM tools: 2,288,943, 2,288,942 and 2,358,646

Made in China