BMW

Camshaft alignment tool set - BMW M47, 50096

This set enables the correct timing to be made when servicing BMW M47 2.0 16 engines
This timing tool set includes crankshaft pin, camshaft setting plate, clamp for camshaft locking tool and the 2 necessary timing pins.
Included:
Crankshaft alignment pin
camshaft alignment tool
clamp assembly for camshaft alignment tool
2x tensioner locking pins
Aplication:
BMW; 118 2.0 E87 (03-07), 120 2.0 E87 (03-07), 318 2.0d/td E46/E90/91 (00-07),
320 2.0d/td E46/E90/91 (97-07), 325 3.0 E90/91/92/93 (06-08), 330 3.0d/xd/cd E46/E90/91/92/93 (98-08),
335 3.0 E90/91/92 (06-08), 520 2.0 E39/E60/61 (99-08), 525 3.0d/xd E39/E60/61 (99-08),
530 3.0d/xd E39/E60/61 (98-08), 535 3.0 E60/61 (04-08), 635 3.0 E63/61 (04-08),
730 3.0d/Ld E38/E65/66 (98-08), X3 2.0 E83 (03-07), X3 3.0d/sd E83 (03-08), X5 3.0 E53/E70 (00-08)
Land Rover; Range Rover 3.0Td6 (02-06), Freelander 2.0Td4 204D3 (00-06),
MG; ZT/T 2.0 (01-05), Rover; 75 2.0CDT/CDTi (99-05)
Engine cod:
BMW; M47, M47TU, M47T2, M57, M57TU, M57T2,
Land Rover; M47R, M57,
MG/Rover; M47R

OEM No.: 11 2 300, 11 6 320, 11 6 322, 11 3 340

The set is in blue case.

Engine Timing tool kit -  BMW  N47; N47S; N57, 50070

Suitable for setting the camshaft in diesel engines with chain drive. For turbocharged BMW 4 & 8 cylinder diesel engines with the motor identification letters N47, N47S, N57 or N57S.

Set includes:
Crankshaft lathe – OEM No. 116480
Camshaft locking – OEM No.  118750
Camshaft lock OEM 118760
Sprocket Puller OEM 118740/118741
Crankshaft wheel locking pin OEM 115320
Crankshaft holding tool OEM 114320
Crankshaft locking tool OEM 118790
2 x piece pin to lock the chain tensioner OEM 113340

Applicable :
For BMW
Series 1: 116d 118d 120d 123d (E81, E82, E87, E88, F20)
Series 3: 316d 318d 320d 325d 330d (E90, E91, E92, E93, F30)
Series 5: 520d 525d 530d 530d 535d 535d GT GT M550d (E60, E61, F07, F10, F11)
Series 6: 640d (F12)
Series 7: 730d 740d 750D (F01)
Series X1: 1.8d, 2.0d, 2.3d, (E84)
Series X3: 1.8d, 2.0d, 3.0d, 3.5D (F25, E83)
Series X5: 3.0d, 4.0d, M5.0d, (E70)
Series X6: 3.0d ; 4.0d; M5.0d, (E71)

Engine Codes:
2.0 N47 and N47S (2007-2015)

Made in China

BMW Vanos Sprocket turning wrench for M50 and M52 engines, 50053

Features: Used to adjust Vanos position on the BMW M50 and M52 engines.

Applicable: BMW E36 320i; E34 520i; E36 325i; E34 525i; E46 328i;

Engine codes: M50B20, M50B25, M52B28, S50B30US, S52B32

OEM No.: 115490

Made in China

Pump Removal Tool BMW N47/N47S and N57, 50880

Used to remove fuel pump.

Suitable for BMW N47/N47S, N57 engines.
OEM No.  118740
Made in China

Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A

Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.

Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)

Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0

OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760

Made in China

Engine Timing Tool Set BMW Mini, PSA 1.4 & 1.6, Citroen, Peugeot, 50390

Suitable for timing 1.4 & 1.6 Valvetronic direct injection petrol, chain drive engines, fitted in BMW Mini, Citroen and Peugeot vehicles.
Content:
Camshaft Locking Tool - Inlet
Camshaft Locking Tool - Exhaust
Camshaft Alignment Clamp
Crankshaft Setting Pin M6
Setscrews (4)
Chain tensioner

Models:
Mini One Coupe R56 (2006-2010)
Mini Cooper Coupe R56 (2006-2010)
Mini Cooper HB R55 (2007-2010)
Citroën C4 (2008-2009)
Citroën C4 Picasso (2008-2009)
Peugeot 207 (2006-2010)
Peugeot 207CC (2007-2010)
Peugeot 308 (2001-2010)
Peugeot 3008 (2009-2012)
Peugeot 5008 (2009-2012)

Camshaft alignment tool - BMW M52TU/M54/M56
This tool set contains a comprehensive set of tools to perform camshaft timing on BMW M52TU, M54, M56 engines.
The kit includes the following:
- For BMW Double VANOS Camshaft Alignment Tool M52TU M54 M56 6-cylinder engines utilized from 1998 onwards
Include:
1) (ref.#116150) Alignment Jig: Adjusting plate for setting valve timing on engine with double Vanos.
2) (ref.#116180) Sprocket Assembly Jig: Use for preassembling secondary chain sprockets with chain on camshafts.
3) (ref.#114220) Rigid Chain Tensioner: Use to tension primary chain.
4) (ref.#113292) Chain Tensioner Lock Pin: Locks chain tensioner during timing.
5) (ref.#113450) VANOS Compressed Air Connection: Use to pressurize the single and double Vanos unit when checking or removing and replacing.
Applicable: for BMW 6 cylinder engine: M52TU (1998-2000), M54 (2001-2004), & M56 (2003 to present).
- For BMW 4 & 6 Cylinder Camshaft Alignment / Timing Tools. Include:
6) (ref.#113240) Camshaft Locking Fixture: Aligns and holds the camshaft in position when assembling cylinder head and replacing timing chain.
Engines: M42, M44, M50, M52, M52TU, M54, M56, S50US, S52US.
7) (ref.#112300)Top Dead Center Pin: Use to lock the flywheel at Top Dead Center when removing or replacing the camshafts or VANOS assemblies.
Engines: M42, M43, M44, M50, M52, M52TU, M54, M56, M60, M62, M70, M73, S50B30, S50B32, S54, S62.
8) (ref.#115490)VANOS Turning Wrench: Use to adjust VANOS position on single VANOS engines when removing or installing.
Engines: M50, M52, S50US, S52US.

Made in: China

Petrol Engine Setting/Locking Kit - BMW N42/N46/N46T 1.6, 1.8, 2.0 chain drive
This timing locking tool set is ideal for timing and adjustment of the twin camshaft on petrol engines. It is also ideal for removing, installing and aligning of vanos unit.
This tool set is crafted by hardened and tempered carbon steel, ensuring its maximum durability for years of use.
Delivery Includes: (BMW OEM-number below for your reference)
1 pc Fixing bridge cam = OEM 119291
1 pc Fixing angle camshafts = OEM 119292
1 pc Fixing screw = as OEM 119293
1 pc Camshaft rotation key = as OEM 19270
1 pc Fixing strip encoder wheels = same as OEM 119350
1 pc Clamping tool = like OEM 119340
1 pc Crankshaft Staking shaft (straight) = as OEM 112300
1 pc Crankshaft Stakeout shaft (angled) = as OEM 119190
Fits the Following BMW - models :
E46 : 316i B18 / B18A; E87 : 118i / 120i; E60 : 520i; E83 X3 2.0; E85 : Z4 2.0; E90/E91 : 318i / 318ti / 320i
Fits the following engine code :N42 , N46 , N46T , B18/-A , B20/-A/-B
Made in China

Petrol engine timing locking tool set for BMW N42; N46, 50387

Contents:

• Intake & Exhaust Camshaft locking device with fixing screws

• Crankshaft Flywheel TDC Locking pin

• Rigid Chain Tensioner Tool

• OEM tools: 11 5 120, 11 9 190, 11 9 270, 11 9 291, 11 9 292, 11 9 293, 11 9 340, 11 9 350

Applications

• BMW E87 118i, 120i N46 engine

• BMW E46 316i, 316ti, 318ti N42 engine

• BMW E90/E91 318i, 320i, N46 engine

• BMW E85 Z4 2, 0l-N46 engine

Engine Codes

• N42 / N46

• B18 / B18A

• B20 / B20A / B20B

Petrol Engine Setting/locking Kit - BМW 1.6, 2.0 N43 - Chain Drive, 50634
Suitable for setting and adjusting the timing on 1.6 & 2.0 BMW N43 petrol engines.
Kit contains the necessary tools for aligning the Vanos units on the inlet and exhaust camshafts:
- Flywheel Locking Tool
- Timing Chain Tensioner
- Chain Tensioner Locking Pins x2
- VANOS Sensor Alignment Tool
- Camshaft Locking Tool
- Balance Shaft Locking Tool ...

Engine timing tool set for BMW N51, N52, N53, N54, N55, 50820

Comprehensive tool kit for locking camshaft in TDC position when checking/adjusting camshaft timing, replacing inlet camshaft or timing chain on BMW N51, N52, N53, N54,N55.
This product BMW Engine Vanos Cam Camshaft Timing Locking Master Tool 2.5 3.0 N51 N52 N52K N53 N54 N55
Installing and removal of camshaft/ variable camshaft timing unit.
Checking and adjustment of timing.
Feature:
Setting And Locking Tool Set Designed For A Wide Range Of Bmw 2.5 & 3.0 Chain Drive, Six Cylinder, Twin Camshaft Petrol Engines,
Designed For N51/n52/n52k Valvetronic And N53/n54/n55 Direct Injection Engines
Designed For Locking Camshaft In Top Dead Center Position When Checking Or Correcting Cam Timing,ÿreplacing Timing Chain,ÿreplacing Camshaft For N51/n52/n53/n54.
Includes: vanos Alignment Plate Stdc Locking Pin Cam Alignment Jig Cam Alignment Jig 2 Setting Gauges
Applicable: BMW N51, N52, N53, N54, N55 engine.

    E60:523i,523Li,525i,525Li,525xi,528i,528xi,530i,530Li,530xi,535i,535xi

    E61/E63: 523i,525i,525xi,530i,530xi,535xi,630i

    E64/E65: 630i,730i

    E66/E70: 730Li,X5 3.0Si

    E81/E82: 130i,135is

    E93: 325i,328i,330i,335i

    E83: X3 2.5i,2.5Si,3.0i,3.0Si

    E85/E86: Z4 2.5i,2.5Si,3.0i,3.0Si,Z4 3.0Si

    E87/E90: 130i,323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi

    E91: 323i,325i,325xi,328i,328xi,330i,330xi,335i,335xi

    E92: 323i,325i,325xi,328i,328xi,330i,330xi,335i

Made in China.

BMW - 3 pcs Rim Lock socket set, 50440

1/2" Dr. special socket setfor BMW rim locks use
Sizes:
17 teeth х 14.5 mm
10 teeth х 16.0 mm
21 teeth х 16.5 mm

Made in China