GEAR PULLERS AND BEARING SEPARATORS
5 pcs Inner bearing puller, 50140
5 pcs Inner bearing puller, 50140
The kit consists of a slide hammer (2 Lb-980 g) and a set of extractors of various sizes needed to pulling internal bearings.
Capacity: 3/8 "(10mm) - 1-1 / 4" (32mm)
Contents:
Slide hammer - 980 g
Bearing extractor: 3/8 "to 1/2" (10 mm-14 mm)
Bearing extractor: 9/16 "to 11/16" (15mm-19mm)
Bearing extractor: 5/8 "to 1" (18mm-25mm)
Bearing extractor: 1 "to 1-1 / 4" (25mm-32mm)
Come with a carry case.
Made in China
Front wheel bearing tools – 72 mm, 50432
Front wheel bearing tools – 72 mm, 50432
This wheel hub bearing tools kit is ideal for the damage-free fitting and disassembling of generation-2 bearings units on all common vehicles for Audi, Seat, Skoda and for Volkswagen vehicles. The convenience of this kit is that it can be used in a situation without the need to dismantle the shock absorber with the hub from the vehicle. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Characteristics:
All the tools in the kit are heat-treated for strength and durability.
With this tool kit, you can easily remove bearings and other components.
These bearings are lightweight with a built-in mounting flange.
They are also preloaded with a retaining brace that fixes the bearing in the hub body.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.
Contents:
1 pcs Pair of half shells for dismantling (72 mm)
1 pcs Pair of half shells for installation (72 mm)
2 pairs Screws to fix the half shells
1 pcs Dismantling plate
1 pcs Installation plate
2 pairs 5 x Bolts (72 mm - 76 mm in length , 8,1 and 11,9 mm in Diameter)
1 pcs Screw M 20 x 2,0 with nut hex drive 22 mm
1 pcs High strength ball bearing fitted spindle, 30mm drive
1 pcs Pressure plate with 8 holes, 72mm, (122 mm in diameter, 18 mm in width)
Applicable:
For Audi A1 ( from year 2011)
For Audi A2 ( built after 2000)
For Seat Ibiza ( from 2002 )
For Skoda Fabia ( manufactured since 2000 )
For VW Fox ( from 2005 )
For VW Polo ( from 2002 )
Wheel bearing tools – 85 mm, 50432A
Wheel bearing tools – 85 mm, 50432A
The hub bearing removal and installation kit with integrated flange serves for a seamless and quick replacement of the damaged generation bearing - 2 - 85 mm on all Volkswagen vehicles (Touareg & T5 with 16 ”wheels/ suspension, Transporter, Multivan). The convenience of this kit is that it can be used in a situation without having to remove the hub damper from the car. This will save a lot of time and the need for support staff and additional equipment (press, etc.). This tool is a must-have for every garage.
Feature:
All tools in the kit are heat treated for strength and durability.
With this tool kit you can easily remove the bearings and other components.
These bearings are lightweight with a built-in flange.
They are also preloaded with a retaining bracelet that secures the bearing to the hub housing.
DO NOT RECOMMEND the use of a IMPACT WRENCH in operation.
https://www.youtube.com/watch?v=pequSdvAJU0&feature=youtu.be
Contents:
5 Push pins
1 Pressure plate with 5 holes
1 Pair of half shells for dismantling
1 Pair of half shells for installation
1 Dismantling plate
1 Installation plate
L Type lever
3 Jaw Internal & External Puller Set, 50153
3 Jaw Internal & External Puller Set, 50153
Dimensions:
Internal bearing extractor: 15 mm - 30 mm
Inner bearing extractor: 30 mm - 80 mm
External bearing extractor: 15 mm - 80 mm.
Locking the nut to open the jaws and secure the bearing. Then use the reverse hammer to pull the bearing.
Made in China
Bearing Puller Long Reach, 210-0858
Bearing Puller Long Reach, 210-0858
3 position external jaws adjustable to 6, 8 and 10 inch length reach.
Screw extension extends screw length by 2-1/2 inch.
Forcing screw has 14 mm hex head for use with ratchet. 3/8 to 2 inch width bearing.
Reach: 300mm
Spread: 10~50mm
For long reach pulling jobs
Self Centering
Manufactured from drop forged alloy steel
Made in Taiwan
12-38mm (1/2"-1-1/2") Pilot Bearing Puller, 66619
12-38mm (1/2"-1-1/2") Pilot Bearing Puller, 66619
Capacity:
Inside Diameter 12-38mm (1/2"-1-1/2")
Produced by Force, Taiwan
Net Weight: 920 g
Bearing puller 19-35 mm, 666A035
Bearing puller, 666A035
Capacity: 19-35 mm
Made in: Force, Taiwan
40-90mm Thick Jaw Gear Puller, 65910
40-90mm Thick Jaw Gear Puller, 65910
Jaws Thickness: 1.5mm
Depth: 100mm
Bearing Dimension: 40 -90m
Material: Made from High-Quality Chrome Vanadium Steel, heat-treated,which guarantees high strength, fracture resistance
Made in Taiwan
2 Jaw Gear Puller 80 - 100 mm, 9240150
2 Jaw Gear Puller 80 - 100 mm, 9240150
Material: Cr-V
2 Jaw Gear Puller 100-120 mm, 9240152
2 Jaw Gear Puller 100-120 mm, 9240152
Material: Cr-V
2 Jaw Gear Puller 150-150 mm, 9240154
2 Jaw Gear Puller 150-150 mm, 9240154
Material: Cr-V
2 Jaw Gear Puller 150- 200 mm, 9240156
2 Jaw Gear Puller 150- 200 mm, 9240156
Материал: CR-V
Made n China
2 Jaw Gear Puller 250-200 mm, 9240158
2 Jaw Gear Puller 250-200 mm, 9240158
Material: Cr-V
Front axle upper ball joint extractor installer VW T4, 50463
Front axle upper ball joint extractor installer VW T4, 50463
Suitable for removing and installing the upper front ball joint in situation without the need to disassemble.
Features a variety of adaptors used in different combinations for extracting and installing.
Applicable: VW; T4 2000 CC, T4 2500 CC
Made in China