14mm 1/2"Dr Injection Line socket, 50802-14

Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for BMW Diesel engines
Material: Cr-V
Size: 14 mm

Made in China

VW, AUDI Crancshaft locking pin M14x1.5, 50766

Features:
To lock the crankshaft at the TDC position

Petrol twin cam locking/setting tool set FIAT 1.6 16V, 50692A
Contents:
TDC Position tool – OEM No. 1 895 443 000
Tensioner adjuster – OEM No. 1 860 876 000
Camshaft Setting Plate ( Inlet and Exhaust ) - OEM No. 1 860 874 000

Applicable:
Fiat 1.6 16v twin cam petrol engine (95-) in:

Fiat: Brava, Bravo, Marea, Marea Weekend, Multipla, Palio, Stilo

Engine code:

178B3.000, 182A4.00, 182A6.000 & 182B6.000

Made in China

30 pcs Alternator pulley tool kit, 50818

For removing the alternator pulleys.
Includes special sockets and bit sockets

1pc M10 Spline Bit Socket : length 120mm
1pc M10 Spline Bit Socket : length 140mm
1pc M10 Spline Bit, 14mm Hex. Drive :  length 57mm
1pc 3/8" Dr. M10 Spline Bit Socket with 31Teeth Nut :  length 90mm
1pc 8mm Hexagon Bit Socket : length 120mm
1pc T50 TX-Star Bit Socket : length 120mm
2pc 75mm(length) Spline Bit : M8-M10
2pc 75mm(length) TX-Star Bit : T40-T50
2pc 75mm(length) Hexagon Bit : 8-10mm
2pc 10mm Hex. Drive x H10 Bit : 50mm(length), 70mm(length)
1pc 33 Teeth Alternator Nut -15mm Hex
1pc 33 Teeth Alternator Nut -15mm Hex
1pc 33 Teeth Alternator Nut -17mm Hex
1pc 33 Teeth Alternator Nut -22mm Hex
1pc 17mm Hexagon Alternator Nut - inner size : 14mm
1pc 1/4" Dr. 10mm Hex. Socket
1pc 17mm Hexagon Alternator Nut
1pc 22mm Hexagon Alternator Nut
1pc 28mm x 22mm Hexagon Alternator Nut
1pc 28mm x 21mm Hexagon Alternator Nut
1pc 28mm x 19mm Hexagon Alternator Nut
1pc 17mm x 19mm Hexagon Alternator Nut
1pc 17mm x 21mm Hexagon Alternator Nut
1pc 4 Poins Alternator Nut with 17mm Hex
1pc 3 Poins Alternator Nut with 38mm Hex
1pc 1/2" Dr. x 10mm Hex. Bit Holder...

VW Diesel Crankshaft Sealing flange tool, 50746

OEM No. T10134

Application: VAG 1.4; 1.6 16V (VW, Audi, Seat, Skoda) as well as Fiat - BAG 1.6 (petrol injection engines), 1.9 / 2.0 SDi, 2.0 TDi and 2.0 Common Rail diesel engines after 2006.

Made in China

 

 

 

 

 

 

 

 

 

 

 

 

Valve insertion tool, 50929

Chrome plated with metal shaft and rubber protector

Made in China

Valve insertion tool, 50928

Chrome plated with plastic shaft

Made in China

Valve repair tool, 50904

Ideal for fast removal and installation of core without damage from a wheel valve.
Robust Steel Shaft with corrosion resistant plating and durable plastic handle.
Suitable for motorcycles, cars, bikes and commercial vehicles.
Lenght: 95mm

Made in China

Twin camshaft locking strap tool AUDI 2.6 & 2.8 V6, 50856

Features:
This camshaft locking strap will hold the twin cams in place V6 2 valve engines.

Applicable:
For Audi 80 2.6/2.8, A4 2.6/2.8, 100 2.6/2.8, A8 2.8, Cabrio 2.6, Coupe 2.6/2.8 1991-2000.
Engine code AAH, ABC.
For V6 engines with 2 valve.
OEM No.3243

Made in; China

Camshaft alignment timing tool – VW, AUDI V8 50852

Description: Hold and fixed  both camshafts to the TDC (top dead center) position when changing the timing  belt.
Suitable for 3.7L and 4.2L V8 engines with 5V on the Audi A6, A8, S8, as well as the VW Touareg and Phaeton.
The included locking pin is used to lock the crankshaft in the TDC position while changing the belt or removing the crankshaft bolt.
Specifications
Material: Carbon steel
Total length: 69 cm
Pin length: 7.5 cm
A locking pin is included
Set contains:
1 Pc Twin Camshaft Holding Bracket - VAG, OEM № T40005. 
1 Pc Crankshaft Locking Pin M18 x 1.5 - VAG, OEM № 3242.
Suitable for For VW and Audi 4.2L V8 engines with 5 valve per cylinder design.
Does not fit newer FSI V8 engines.
Audi:
Audi A6/Quattro (1999-2005), S6 (2000-2004), A8 (1999-2006), S8 (1999-2003), RS4 (2003-2005), RS6 (2003-2004).
VW:
VW - Touran (2003-2006), Phaeton (2003-2004)
Engine VAG 4.2 V8
Code:
3.7 - AKC, AQG, BFL;
4.2 - ANK, AQH, AQJ, ARS, ARU, ASG, AWN, AVN, AVP, AUW, AXQ, BCY, BFM, BGH, BHX

Made in: China

Camshaft alignment timing tool VW, AUDI V6, 50851

This tool set is used to hold / secure both camshafts and crankshaft at TDC position when replacing timing belt.

Crankshaft locking pin is used to lock the crankshaft at the position when timing the engine or servicing the timing belt or flywheel / drive plate.

Applicable to 2.8L and 2.7L Bi-Turbo V6 5-valve(30 valves) engines installed in VW & Audi platforms from 1997-2005.

Set contains:

1 Pc Twin Camshaft Holding Bracket - VAG, OEM# 3391.

1 Pc Crankshaft Locking Pin M18 x 1.5 - VAG, OEM# 3242.

Applicable:

Audi A4 2.4 and 2.8 (1997-2002)

Audi A6 2.4 and 2.8 (1997-2002)

Audi A8 2.8 (1997-2002)

Audi S4 2.7 Biturbo (1997-2001)

VW Passat 2.4 (1996-2002), Passat 2.8 (1996-2001)

Engine codes:

2.4 V6 30V: AGA, AJG, ALF, ALW, AML, AMM, APC, APS, APZ, ARJ, ARN, ASM, BDV

2.7 V6 30V: GTC, AJK, ARE, ASJ, AZA, AZB, AZR, BES

2.8 V6 30V: ACK, AEJ, AGE, AHA, ALG, AMX, AVR, AQD, ATQ, ATX, BBG

Made in: China

6 pcs Diesel glow plug service kit, 50823

Features: To remove and repair glow plugs for most diesel models.
Content:
- Three 6-pt. socket inserts with a 180 ° flexible head for 8 mm, 9 mm and 10 mm glow plugs
- Glow plugs removal rool
- Two M10 and M12 threading reaming tools to remove the carbon deposits in the glow plug chamber.

Made in China

Engine timing tool set – Ford, Mazda & Volvo, 50658

Designed for the belt or chain driven petrol or diesel Ford, Mazda and Volvo engines.
This Ford and Mazda petrol engine timing tool is a four-piece camshaft setting bar that is suitable for all the applications including the latest HWDA, HWDB, HXDA, Zetec and Duratec engines.
This automotive tool covers a huge range which include 1.25 L, 1.4 L, 1.6 L and 1.6 L 16V Ti-VCT engines as well s the 1.8 L, 2.0 L and 2.3 L 16V engines.
Set is suitable for these engines in Mazda and Volvo vehicles.

OEM Tools: Ford; 303-1054, 303-507 (21-210), 303-620 (21-163), 303-574, 303-748, 303-376 (21-162B), 303-376B, Mazda; 49 JE01 061, 303-574, 49 JE02 061, 303-465, 49 JE01 054, Volvo; 999 7152, 999 7151

Applications:

Ford: C-MAX (07-10), Cougar (98-01), Fiesta (95-15), Focus (98-11), Focus C-MAX (03-07), Fusion (02-12), Galaxy (06-12), Mondeo (93-12), Puma (97-02), S-MAX (06-12), Tourneo Connect (02-06), Transit (06-12), Transit Connect (02-06)

Mazda: 121 ZQ (95-00), 2 DY (02-07), 3 BK (03-09), 3 BL (09-15), 5 CR (05-10), 5 CW (10-12), 6 GG/GY (02-07), 6 GH (07-15), MPV LW (02-05), MX-5 NC (05-15), Tribute EP (04-06)

Volvo: C30 (06-13), S40 (06-12), S80 (07-11), V50 (04-12)

Hose clamp pliers, 50738

Features: To remove and install clamps for hose connections in hard-to-reach areas.
With ratchet locking mechanism.
Comfortable handle with ergonomic grip.

Vacuum and fuel hose pliers, 50737

For easy removal hose fuel and vacuum system
Working part: 35 mm
Hose dimensions: 4 - 12.5 mm (5/32 "- 1/2")