NEGEL TOOL BOX

5 pcs 1/2"Dr. Twist socket set

Socket size: 17 mm, 19 mm, 21 mm, 22 mm and 12 mm and drift punch.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

Water pump sprocket holder, 50864

Application:
For GM Ecotec; Holds the Timing Chain and Gear in Place While Removing or Installing Water Pump on Ecotec Engines.
Securely holds water pump sprocket preventing loss of timing or damage to the engine.
Special half-moon design allows easier access to water pump gear bolts.
Uses access cover bolts to hold the tool in place.

Made in China

Engine timing tool for VAG 1.2 TFSI, 50661

This generation of VAG 1.2 TFSI engines were first introduced in 2010 and are available in vehicles across the four main brands of the VAG Group (Audi, Seat, Skoda and Volkswagen.) These four cylinder, single camshaft engines, have two valves per cylinder. A timing chain provides drive between the crankshaft and camshaft. The engines are turbo charged and use a high pressure direct injection fuel system.
Content:
Crankshaft Locking Pin
Camshaft Setting Tool
Timing Cover Alignment Pins (2)
Models:
Audi A1, A3, A3 Sportback, A3 Cabriolet
Seat Altea, Altea XL, Ibiza, Ibiza Sportcoupe, Leon, Toledo
Skoda Fabia, Fabia Combi, Rapid, Oktavia, Oktavia Combi, Rommster, Yeti
Volkswagen New Beetle, Caddy, Golf, Golf Plus, Golf Cabriolet, Golf Variant, Jetta, Polo, Touran
Engine Codes: CBZA, CBZB, CBZC

Engine timing tool kit Opel & Vauxhall 1.6 16V, 1.8 16V, 50651

Suitable for timing applications on all 1.4, 1.6 and 1.8 Twin port petrol engines with belt drive.
Kit comprises camshaft setting tools and Belt tensioner locking pins.
Applications:
Holden/Vauxhall/Opel:: Astra-G (03-06), Astra-H (04-12), Astra-J (09-13), Corsa-D (07-13),
(06-10), Signum (06-08),Vectra-C (06-08), Zafira-B (05-13), Zafira-C Tourer (11-13)
Chevrolet: Aveo (08-13), Cruze (09-12), Orlando (11-13)
Saab: 9-5 (10-12)
Fiat: Croma (06-11), Stilo (05-08)
Alfa Romeo: 159 (05-10)
Кодове на двигателя:
1.4 16V: G14D
1.6: A16LEL, A16LER, A16LET, A16XER, LDE/A16LER, DE/A16XER, LLU/A16LET, Z16LEL,Z16LER, Z16LET, Z16XE1, Z16XEP, Z16XER 192B3.000(Z16XEP)
1.6 ecoFLEX CNG: A16XNT, LGE/A16XNT, Z16XNT
1.8: 2HO/A18XEL, 2HO/A18XER, A18XER, Z18XER, 939A4.000

OEM №: KM-911, KM-6625/EN-6625/2.000.012.800, KM-6340/EN-6340/2.000.012.100, KM-6349/KM-6130/EN-6349, KM-6333/EN-6333, KM-6628-A/2.000.012.000

Made in China

Еngine timing tool kit for VAG 2.5 / 4.9D / TDI PD, 50617
Set comes with:
Camshaft Locking Tool 10 Cylinder - OEM T10194
Clamping Device - OEM T10199
Rotating crankshaft socket (5 Cylinder) - OEM T10225
Crankshaft Locking Wrench (5 Cylinder) - OEM T10226
Aplicable:
Transporter T5 / Caravelle 2.5 TDI PD 2003-2011
Touareg 2.5 TDI PD, 4.9 5.0 V10 TDI 2003-2011
PHAETON 4.9 5.0 V10 TDI 2002-
Engine Codes:
2.5 TDI- AXD, AXE, BAC, BLJ, BLK, BPD, BPC, BPE and BNZ
4.9 5.0 TDI- AYH, AJS, BLE, BWF

Universal tie rod wrench, 50443

The mster tie rod tools easily replace inner tie rod ends from 33-42 mm diameter without removing the rack and pinion.
Work with 1/2" square drive tools.

Diesel/Petrol VAG 1.9; 2.4; 2.5, 2.7, 2.8 - Belt drive camshaft sprocket remover, 50329

Specially designed to remove amshaft sprockets with 5 and 6 spikes from Audi, Vw, Skoda vehicles.
Features ball and thrust screw to eduse damade to camshaft bolt.

Applications
Diesel engines:    
1.9D SDi/Tdi: Audi; A3 (96-03), Seat; Ibiza/Cordoba (99-02), Leon (00-05), Toledo (99-05), Skoda; Octavia (97-06), VW; Beetle (98-04), Bora (97-05), Caddy (95-04), Golf (97-05), Polo (99-02)
2.5D Tdi V6: Audi; A4 (97-09), A6 (97-05), A6 Allroad (00-05), A8 (97-02), Skoda; Superb (02-08), VW; Passat (98-05)
2.5D TDiCR: VW; Crafter (06-12)
Engine Codes - Diesel:    
1.9D SDi/Tdi: AGP, AGR, AHF, ALH, AQM, ASV
2.5D TDiV6: AFB, AKE, AKN, AYM, BAU, BCZ, BDG, BDH, BFC
2.5D TDiCR: BJJ, BJK, BJL, BJM, CEBA, CEBB, CECA, CECB
Petrol engines:    
2.4, 2.7T, 2.8 V6: Audi; A4 (94-09), RS4 (00-02), S4 (97-01), A6 (95-05), A6 Allroad (00-05), A8 (96-10), Skoda; Superb (02-08), VW; Passat (96-05)
3.7, 4.2 V8: Audi; A6 (99-05), S6 (00-04), A8 (99-09), S8 (99-03), RS6 (03-05), VW; Touareg (03-07), Phaeton (03-15)
Engine Codes - Petrol:    
2.4 V6: AGA, AJG, ALF, ALW, AML, AMM, APL, APS, APZ, ARJ, ARN, ASM, BDV
2.7T V6: AGB, AJK, ASJ, ARE, AZA, AZB, AZR, BES
2.8 V6: ACK, AGE, AHA, ALG, AMX, APR, AQD, ATQ, ATX, BBG
3.7 V8: AKC, AQG, BFL
4.2 V8:    AKB, ANK, AQF, AQH, AQJ, ARS, ART, ARU, ASG, AUX, AVN, AVP, AUW, AWN, AXQ, AYS, BBD, BCS, BCY, BFM, BGH, BGK, BHX, BJG, BRV

OEM Tool: T4000;T40001

Made in China

Diesel engine setting/locking kit - Jaguar & Land Rover 2.7, 50307

This tool kit is a complete kit that allows the valve timing to be set/maintained during cam belt replacement

• Timing pins for Land Rover Discovery 2.7 TDV6, Range Rover Sport 2.7 TDV6 and Jaguar S Type TDVi with V6 engines with automatic and manual transmissions
• Engine Code 276DT 2004-2007 and 306DT 2009-2014
• Flywheel Locking Tools - OEM 303-1117 (Automatic Transmission) 303-1116 (Manual Transmission)
• Camshaft Sprocket aligning tool 303-1132
• Camshaft sprocket timing pins 303-1126
• Made in China

Bearing separator set 75-105, 50134

Pul out the bearing with H-type beam and bolts
Capacity: 75-105mm
1 separator
1 main rod
4 pcs extensions

CV Joint Assembly Removal Tool, 50044

Description:
- For removing CV joints on front wheel drive cars without removing the drive shaft
- Quickly removes the CV joint from the drive shaft without damaging the joint, and keeps hands free for releasing retaining circlip
- A robust tool for front wheel drive cars
- Suitable for most vehicle
- Removes CV joints without removing drive shaft
- Time saver
- Essential service tool
- Phosphate Coated for long heavy duty service life

CV Joint clamp banding tool, 50690
Use to install and tighten the "band-it" or strap style clamps on CV joint boots or on power steering rack and pinion steering gear boots.
Once installed into the tool tighten the band by turning the handle on the tool;
Use a socket or wrench on the handle to torque the band to OE specifications.
When the boot clamp has been tightened to specs cut the band to the correct length by flipping the lever (at the front of the tool) forward.
Features:
CV joint boot clamp wrench securely fastens band-it style free-end clamps
Roll band clips and pre-formed CV boot clamps
Use by turning the winding mandrel with a 1/2-inch socket or wrench
Measures 11-1/2 inches long
Works on All CV Boot Clamps, ATV,  UTV and some automotive applications.

14 pcs radiator cooling system pressure tester kit
Heavy-duty pressure test kit is suitable for wide range of vehicle applications and for locating leaks in vehicle cooling system. Heavy-duty pump unit features smooth action and easy-to-read scale. Ideal instrument for testing for leaks; head gasket, radiator, heater core and header tank.
Features:Updated kit which includes two new caps suitable for newer Ford and Vauxhall/Opal vehicles

• Heavy-duty pressure test kit
• Aluminum radiator header tank caps are color-coded for ease of use and have quick release fittings.
• Suitable for wide range of vehicle applications
• Locate system leaks from: head gasket, header tank, radiator, and heater cores
• Water pump, plugs, hoses and housings
• Heavy-duty pump unit features smooth action and large, easy-to-read, scale
• Long hose aids easy use of the gauge and quick release is fitted with pressure release valve for safe operation
• Set supplied with thermometer and packed in rugged carry-case

Applications: Alfa Romeo, Audi, BMW, Citroen, Fiat, Ford, Isuzu, Jaguar, Jeep, Lexus, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Renault, Rover, Saab, Subaru, Suzuki, Toyota, Vauxhall/Opel, Volvo, VW

Made in China

Vacuum tester and brake bleeder, 50411

The Vacuum/Pressure Pump may be used for many different tasks.
1. Testing vacuum-operated components (door locks, actuators,etc)
2. Engine mechanical testing (valves, cam timing, head gasket, etc)
3. Brake and clutch hydraulic system bleeding
4.Measurement of vacuum supplied by booster reservoirs solenoids or the engine.
Features:
Checks vacuum/pressure
Operated automotive components.
Can be used to bleed hydraulic  systems or siphon fluids.
Detailed used instructions and photos inside of case.
Hand pump with built-in vacuum pump
Assorted vacuum hoses
Assorted hose adapters
Universal cup adapter
4 ounce reservoir jar
Jar lids

Brake Piston Wind Back Tool, 50066

Specifications:
Chemically blackened steel spreader plates
Suitable for most ATE, Bendix, Delco, Brembe and Girling calipers
Fitted with tommy bar
Chrome screw with linking bar
Capacity: 0 ~ 2.5" (0 ~ 65mm)
Applications:  Alfa, Audi, Fiat, Ford, Nissan, GM (Vauxhall/Opel), Peugeot, Renault, Rover, VW, Porsche. The list is endless...

63 pcs Fiat/ Alfa/ Lancia engine timing tool kit
Description:
This is the ultimate master Engine Timing Tool Kit for Alfa Fiat Lancia.
Comprehensive engine timing tool set for Italian cars.

Contents:
Includes all tools required for camshaft alignment, tensioning and crankshaft alignment to cover a wide range of petrol and diesel engines packed in blow moulded case with bespoke foam insert with perfect indents for every tool in the collection.
Suitable For:
Contains important tools for adjustment: flywheel, crankshaft, camshaft, fuel injection pump shaft, belt pulley, tensioning of the timing belt, complete classification chart included fits varoius engines.
- Alfa Romeo vehicle with 1.4;1.6 1.8, 2.0 and 3.0L 4 cylinders; 6-cylinder engine Alfa Romeo 145, 146, 147, 155, 156, 164, 166, GTA, GTV and Spider GT
- Fiat, Lancia vehicle with 1.2, 1.4, 1.6, 1.8 And 2.0L 4; 5-cylinder engine Fiat Panda, Punto, Palio, Siena, Bravo, Brava, Stilo, Marea, Multipla, Barchetta, Lancia Dedra, Delta, Kappa and Lydra.

Made in: China