NEGEL TOOL BOX
7-Drawer Roller Tool Cabinet & 224 pcs tools
7-Drawer Roller Tool Cabinet & 224 pcs tools
Powder coating to resist scratch
Full height bumps on 4 corners to avoid clash
Recessed and perforated side panel for hanging tools
Each drawer loading capacity up to 40kg
Ergonomic plastic top tray, loading capacity up to 125kg
Inner lock system for safety
5” Casters, 2 fixed wheels and 2 swivel casters, one with brake
Contents:
Drawer № 1:
1/2" Dr. Flank socket: 8-9-10-11-12-13-15-16-17-19-20-21-22-24-27-30-32 mm
1/2" Dr. Flank deep socket: 10-13-15-16-17-18-19-22-24 mm
1/2" х 5" Extension bar
1/2" Universial joint
3/8" Dr. Flank socket : 6-7-8-9-10-11-12-13-14-15-16-17-18-19 mm
3/8" Dr. Flank deep socket : Dr. 8-10-11-12-13-14-15-16-17-18-19 mm
3/8" х 5" Extension bar
3/8" Universial joint
Къса вложка 1/4" Dr. 4-4.5-5-5.5-6-7-8-9-10-11-12-13-14 мм
Удължена вложка 1/4" Dr. 4--5-5.5-6-7-8-9-10-11-12-13 мм
1/4" х 3" Extension bar
1/4" Universial joint
1/4" Dr. Ratchet handle
3/8" Dr. Ratchet handle
1/2" Dr. Ratchet handle
Drawer № 2:
1/4" Dr. Bit socket H6.3*35*:
Slotted: SL4.0; SL5.5; SL6.5; SL7.0
Phillips: PH0; PH1; PH2; PH3
Pozidrive: PZ0; PZ1; PZ2; PZ3
Torx: T8; T9; T10; T15; T20; T25; T27; T30; T40
Tamper Torx: TT8; TT9; TT10; TT15; TT20; TT25; TT27; TT30; TT40
Five slide Torx: TS10; TS15; TS20; TS25; TS27; TS30; TS40; TS45; TS50
Spline: M8; M10; M12
HEX: H3; H4; H5; H6; H7; H8
1/2" Dr. L53mm Bit socket
Spline: M16
1/2" Dr. L55mm Bit socket
HEX: H1; H17; H19; H22; H24
М18 1/2" Dr. L78 mm Bit socket
1/2" Dr. L100mm Bit socket
Torx: T80
Spline: M9; M16
Ribe: R9
1/2" Dr. L140mm Bit socket
HEX: H10; H11; H13
Spline: M10; M12; M14
Torx: T40; T45; T50; T55; T60; T70
Ribe: R10
1/2" Dr. L160mm Bit socket: HEX: H5
1/2" Dr. L230mm Bit socket: HEX: H7
1/2" Dr. L240mm Bit socket: Ribe: R7; R8
1/2" Dr. L300mm Bit socket: Torx: T30
Drawer № 3
Combination wrench: 6-7-8-9-10-11-12-13-14-15-16-17-18-19-20-21-22-24 mm
Double open end wrench: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Deep offset ring spanner: 6х7; 8х9; 10х11; 12х13; 14х15; 16х17; 18х19; 20х22; 21х23 mm
Drawer № 4
Slotted screwdriver: 3*100mm
Slotted go-through screwdriver: 5*75mm; 6*38mm; 6*100mm; 8*150mm
Phillips screwdriver: PH0*100mm
Phillips go-through screwdriver: PH1*75mm; PH2*38mm; PH2*100mm; PH3*150mm
Torx Screwdriwer: T6*80mm; T7*80mm; T8*80mm; T9*80mm; T10*80mm; T15*100mm; T20*100mm; T25*100mm; T27*100mm; T30*100mm; T40*150mm
Drawer № 5:
Circlip pliers: 7” (180mm) External straight pliers; 7” (180mm) Internal straight pliers; 7” (180mm) External bent 90° pliers; 7” (180mm) Internal bent 90° pliers
Diagonal pliers: 180m
Combination pliers: 200mm
Long nose pliers: 200mm
Water pump pliers: 250mm
16oz mechanic hammer: 300g
Overal size:
Height: 975 mm
Width: 751 mm
Deep: 484 mm
Made in China
Ball Joint Separator 40 mm, 093-4323D
Ball Joint Separator 40 mm, 093-4323D
Features:
- Drop forged steel body and bolt for long and rough usage.
- Suitable for splitting track rod ends, anti-roll bar mountings, steering ball Joints and etc.
Jaw size: 40 mm
Screw: 7/8"-14UNF x 135 mm
Ball Joint Separator 29 mm, 093-4323C
Ball Joint Separator 29 mm, 093-4323C
Features:
- Drop forged steel body and bolt for long and rough usage.
- Suitable for splitting track rod ends, anti-roll bar mountings, steering ball Joints and etc.
Jaw size: 29 mm
Ball Joint Separator 23mm, 093-4323B
Ball Joint Separator 23mm, 093-4323B
Features: Drop forged steel body and bolt for long and rough usage.
Suitable for splitting track rod ends, anti-roll bar mountings, steering ball Joints and etc.
Jaw size: 23 mm
Screw: M16x1.5x70 mm
Ball Joint separator 28 mm, 093-4349A
Ball Joint separator 28 mm, 093-4349A
- Drop forged steel body and bolt for long and rough usage
- Suitable for splitting track rod ends, anti-roll bar mountings, steering ball Joints and etc.
- Audi A4-A6-A8, VW, Passat ab '97 and Mercedes W203 Etc.
Jaws open: 28 mm
Jaws deep: 25 mm
Ball Joint separator 23 mm, 093-4349
Ball Joint separator 23 mm, 093-4349
Futures:
- Drop forged steel body and bolt for long and rough usage
- Suitable for splitting track rod ends, anti-roll bar mountings, steering ball Joints and etc.
- Espesially in small space conditions.
- Applicable: Audi, BMW, Citroen, Ford, Mercedes, Opel, Peugeot, Renault, Rover, Saab, Volvo, VW etc.
Jaw open: 23 mm
Jaw deep: 25 mm
Diesel injection pump puller (BMW), 50698
Diesel injection pump puller (BMW), 50698
This tool is speciically designed for holdin the sprocket/shain in place when disassmbling the VP44 injection pump and high pressure pump.
Common rail fitted to BMW engines:
318D / compact (Е46)
320D / TD compact(46)
330D (Е46) 525D (Е39)
525D (E60 / E61)
530D (Е39)
530D (E60 / E61)
535d (E60 / E61)
730D (Е38)
X5 3.0D (Е53)
Made in China
Harmonic Balancer Puller And Installer Kit, 50030
Harmonic Balancer Puller And Installer Kit, 50030
- Carbon steel, hardened, zinc plated
- Universal use: adapters incl. 9
Install correct threaded adapter stud into the center screw and puller nut as shown. Screw into end of crankshaft. Position the pulle tool with bearing TOWARDS the crankshaft. Install two or three bolts (as required) thru the piate into the balancer. While holding the end of the center screw with a wrencn, turn the puller nut to remove balancer.
Install correct threaded adapter stud into the center screw and puller nut as shown. Position the balancer on the crankshaft as straight as possible. Position puller plate with booring facing AWAY from balancer. Turn puller nut to install.
Contents:
- 1 puller plate
- 12 screws, each 3 pieces:
3/8NC16 X 57 MM - 57 MM X 3/8NC24
M6 X 1.0 X 60 MM - M8 X 1.25 X 60 MM
- 1 center bolt 10 mm
- 9 adapters:
M12 X 1.5 - 3/8NC16
M14 X 1.5 - 3/8NC16
M16 X 2.0 - 3/8NC16
1 / 2 X NC20 - 3/8NC16
9 / 16 x nC18 - 3/8NC16
7 / 16 X NC20 - 3/8NC16
3 / 4 X NC16 - 3/8NC16
5 / 8 x nC18 - 3/8NC16
3 / 8 X NC16 - 3/8NC16
Made in China
VAG 2.7/3.0 TDI V6 - Diesel engine setting/locking & HP Pump removal/instalation set, 914G5
VAG 2.7/3.0 TDI V6 & 4.0/4.2 TDI V8 - Diesel engine setting/locking & HP Pump removal/instalation set, 914G5
Specifically designed for servicing Volkswagen/Audi 2.7 & 3.0 V6, common rail, chain driven diesel engines.
The kit includes special adaptors for turning and positioning the crankshaft, crankshaft alignment pins with flats and side pins to assist in alignment of the crankshaft with the cylinder head.
Content:
- Crankshaft Locking Pin
- Injection Pump/Balancer Shaft Locking
- Crankshaft Turning Tool Type 1
- Crankshaft Turning Tool Type 2
- Camshaft Locking Pin (2pc)
- Camshaft Alignment/Locking Tool
- Camshaft Sprocket Holding Tool
- Tensioning Locking Pin 3.3mm (2pc)
(OEM: T40062, T40041, T40049, 3359, T40058, T40060, 3342)
Models:
- AUDI A4 2.7TDI (2001-2008) with Engine Code BPP
- AUDI A4 2.7TDI (2001-2008) with Engine Code BSG
- AUDI A4/A6/A8 3.0TDI (since 2005) with Engine Code ASB
- AUDI A4 3.0TDI (2001-2008) with Engine Code BKN
- AUDI A4/A5 3.0TDI (since 2007) with Engine Code CAPA
- AUDI A6/ALLROADER 2.7TDI (since 2005) with Engine Codes BPP/BSG
- AUDI A6 ALLROADER/A8 3.0TDI (since 2003) with Engine Codes BNG/BMK
- AUDI A6/Q7 3.0TDI (since 2005) with Engine Codes BMZ/BUG/BUN
- AUDI A8 4.0TDi (2003-2010) with Engine Code ASE
- VOLKSWAGEN PHAETON 3.0TDI/PD (since 2004) with Engine Codes BMK/CARA
- VOLKSWAGEN TOUAREG 3.0TDI (since 2005) with Engine Codes BKS/BUN/CASA/B
Codе: 520133
International shipment available. Please ask for price.
Mechanic's stethoscope, 812-0201
Mechanic's stethoscope, 812-0201
Locates source of engine niose;
Quickly listen for trouble by tracing sound of flowing water, oil gas or steam;
Identify piston slap, wop gears, faulty valves, water pump, failute damaged gaskets and effective bearings;
Handle is snockproof;
Disassembles for storage.
Cooling System Vacuum Purge & Refill Kit, 647-1012
Cooling System Vacuum Purge & Refill Kit, 647-1012
- For refilling radiators with coolant mix without introducing air pockets.
- Complete with adaptors for most modern cars.
- Adaptor sizes: 35mm | 39mm | 44mm | 48mm diameter.
- Adaptors expand by approximately 4mm.
- Packaged in a blow mould case with instructions.
Air Pressure: 90 Psi (6,2 Bar)
Ait consumption: 12 cfm (340 l/min)
Air Inlet size: 1/4"
Fluid hise lenght: 900 mm
Made in Taiwan
3 pcs Bearing separator, 160-9315
3 pcs Bearing separator, 160-9315
Equal pulling force diatributed as 3 support points
FLEXIBLE SPREAD FROM 35 mm ~105 mm
Made from SCM415 material
Bolt size: 1/2" х 20Т х L135 mm
Made in Taiwan
Injection pump extractor tool, EN9G1501
Injection pump extractor tool, EN9G1501
1. This tool is specifically designed for holding the sprocket / chain in place when disassembling the VP44 injection pump and high pressure pump.
2. Common rail fitted to BMW engines:
318D / compact (E46), 320D /TD compact(46), 330D(E46),
525D(E39), 525D(E60/E61), 530D(E39), 530D(E60/E61),
535D(E60/E61), 730D(E38) ,X53.0D(E53)
Made inTaiwan
5 pcs 1/2"Dr. Triangle socket M5-M12, 50639
5 pcs 1/2"Dr. Triangle socket M5-M12, 50639
New style security sockets
M5 (8mm), M6 (10mm), M8 (12mm), M10 (15mm), M12 (16.5mm) x 1/2"D
Manufactured from Chrome Vanadium
Applications include: Electrical light fittings. Electrical cabinet tamperproof fixings
Supplied on a socket rail for storage
These new style security sockets (part number 5683) are designed for the triangular profile, tamperproof fixings found on VAG TDi engines (injection pump quality adjustor), Bosch injector and certain light fittings.
The five piece socket set includes M5 (8mm), M6 (10mm), M8 (12mm), M10 (15mm), M12 (16.5mm), all 1/2" drive and supplied on a socket rail for storage.
Made in China
Universal Clutch Alignment Tool, 318-K211
Universal Clutch Alignment Tool, 318-K211
For easy alignment of single plate clutches. Also suitable for flywheels with no pilot bearing.
Additional Information
For single plate clutches.
Suitable for flywheels with or without pilot bearing.
Fast to fit and remove.
Universal applications.
Size of collets: 14 mm - 28 mm across 3 adaptors. Cone size range from 35mm < 67mm.
5 pcs Trim fastener and molding removal set, 096-5216
5 pcs Trim fastener and molding removal set
Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside