NEGEL TOOL BOX
14mm 1/2"Dr Injection Line socket, 50802-14
14mm 1/2"Dr Injection Line socket, 50802-14
Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for BMW Diesel engines
Material: Cr-V
Size: 14 mm
Made in China
FIAT 1.6 16V Petrol twin cam locking/setting tool set, 50692A
Petrol twin cam locking/setting tool set FIAT 1.6 16V, 50692A
Contents:
TDC Position tool – OEM No. 1 895 443 000
Tensioner adjuster – OEM No. 1 860 876 000
Camshaft Setting Plate ( Inlet and Exhaust ) - OEM No. 1 860 874 000
Applicable:
Fiat 1.6 16v twin cam petrol engine (95-) in:
Fiat: Brava, Bravo, Marea, Marea Weekend, Multipla, Palio, Stilo
Engine code:
178B3.000, 182A4.00, 182A6.000 & 182B6.000
Made in China
30 pcs Alternator pulley tool kit, 50818
30 pcs Alternator pulley tool kit, 50818
For removing the alternator pulleys.
Includes special sockets and bit sockets
1pc M10 Spline Bit Socket : length 120mm
1pc M10 Spline Bit Socket : length 140mm
1pc M10 Spline Bit, 14mm Hex. Drive : length 57mm
1pc 3/8" Dr. M10 Spline Bit Socket with 31Teeth Nut : length 90mm
1pc 8mm Hexagon Bit Socket : length 120mm
1pc T50 TX-Star Bit Socket : length 120mm
2pc 75mm(length) Spline Bit : M8-M10
2pc 75mm(length) TX-Star Bit : T40-T50
2pc 75mm(length) Hexagon Bit : 8-10mm
2pc 10mm Hex. Drive x H10 Bit : 50mm(length), 70mm(length)
1pc 33 Teeth Alternator Nut -15mm Hex
1pc 33 Teeth Alternator Nut -15mm Hex
1pc 33 Teeth Alternator Nut -17mm Hex
1pc 33 Teeth Alternator Nut -22mm Hex
1pc 17mm Hexagon Alternator Nut - inner size : 14mm
1pc 1/4" Dr. 10mm Hex. Socket
1pc 17mm Hexagon Alternator Nut
1pc 22mm Hexagon Alternator Nut
1pc 28mm x 22mm Hexagon Alternator Nut
1pc 28mm x 21mm Hexagon Alternator Nut
1pc 28mm x 19mm Hexagon Alternator Nut
1pc 17mm x 19mm Hexagon Alternator Nut
1pc 17mm x 21mm Hexagon Alternator Nut
1pc 4 Poins Alternator Nut with 17mm Hex
1pc 3 Poins Alternator Nut with 38mm Hex
1pc 1/2" Dr. x 10mm Hex. Bit Holder...
VW Diesel Crankshaft Sealing flange tool, 50746
VW Diesel Crankshaft Sealing flange tool, 50746
OEM No. T10134
Application: VAG 1.4; 1.6 16V (VW, Audi, Seat, Skoda) as well as Fiat - BAG 1.6 (petrol injection engines), 1.9 / 2.0 SDi, 2.0 TDi and 2.0 Common Rail diesel engines after 2006.
Made in China
Valve insertion tool, 50929
Valve insertion tool, 50929
Chrome plated with metal shaft and rubber protector
Made in China
Valve insertion tool, 50928
Valve insertion tool, 50928
Chrome plated with plastic shaft
Made in China
Valve repair tool, 50904
Valve repair tool, 50904
Ideal for fast removal and installation of core without damage from a wheel valve.
Robust Steel Shaft with corrosion resistant plating and durable plastic handle.
Suitable for motorcycles, cars, bikes and commercial vehicles.
Lenght: 95mm
Made in China
AUDI 2.6 & 2.8 V6 - Twin camshaft locking strap tool, 50856
Twin camshaft locking strap tool AUDI 2.6 & 2.8 V6, 50856
Features:
This camshaft locking strap will hold the twin cams in place V6 2 valve engines.
Applicable:
For Audi 80 2.6/2.8, A4 2.6/2.8, 100 2.6/2.8, A8 2.8, Cabrio 2.6, Coupe 2.6/2.8 1991-2000.
Engine code AAH, ABC.
For V6 engines with 2 valve.
OEM No.3243
Made in; China
VW, AUDI V8 - Camshaft alignment timing tool – 50852
Camshaft alignment timing tool – VW, AUDI V8 50852
Description: Hold and fixed both camshafts to the TDC (top dead center) position when changing the timing belt.
Suitable for 3.7L and 4.2L V8 engines with 5V on the Audi A6, A8, S8, as well as the VW Touareg and Phaeton.
The included locking pin is used to lock the crankshaft in the TDC position while changing the belt or removing the crankshaft bolt.
Specifications
Material: Carbon steel
Total length: 69 cm
Pin length: 7.5 cm
A locking pin is included
Set contains:
1 Pc Twin Camshaft Holding Bracket - VAG, OEM № T40005.
1 Pc Crankshaft Locking Pin M18 x 1.5 - VAG, OEM № 3242.
Suitable for For VW and Audi 4.2L V8 engines with 5 valve per cylinder design.
Does not fit newer FSI V8 engines.
Audi:
Audi A6/Quattro (1999-2005), S6 (2000-2004), A8 (1999-2006), S8 (1999-2003), RS4 (2003-2005), RS6 (2003-2004).
VW:
VW - Touran (2003-2006), Phaeton (2003-2004)
Engine VAG 4.2 V8
Code:
3.7 - AKC, AQG, BFL;
4.2 - ANK, AQH, AQJ, ARS, ARU, ASG, AWN, AVN, AVP, AUW, AXQ, BCY, BFM, BGH, BHX
Made in: China
VW, AUDI V6 - Camshaft alignment timing tool, 50851
Camshaft alignment timing tool VW, AUDI V6, 50851
This tool set is used to hold / secure both camshafts and crankshaft at TDC position when replacing timing belt.
Crankshaft locking pin is used to lock the crankshaft at the position when timing the engine or servicing the timing belt or flywheel / drive plate.
Applicable to 2.8L and 2.7L Bi-Turbo V6 5-valve(30 valves) engines installed in VW & Audi platforms from 1997-2005.
Set contains:
1 Pc Twin Camshaft Holding Bracket - VAG, OEM# 3391.
1 Pc Crankshaft Locking Pin M18 x 1.5 - VAG, OEM# 3242.
Applicable:
Audi A4 2.4 and 2.8 (1997-2002)
Audi A6 2.4 and 2.8 (1997-2002)
Audi A8 2.8 (1997-2002)
Audi S4 2.7 Biturbo (1997-2001)
VW Passat 2.4 (1996-2002), Passat 2.8 (1996-2001)
Engine codes:
2.4 V6 30V: AGA, AJG, ALF, ALW, AML, AMM, APC, APS, APZ, ARJ, ARN, ASM, BDV
2.7 V6 30V: GTC, AJK, ARE, ASJ, AZA, AZB, AZR, BES
2.8 V6 30V: ACK, AEJ, AGE, AHA, ALG, AMX, AVR, AQD, ATQ, ATX, BBG
Made in: China
6 pcs Diesel glow plug service kit, 50823
6 pcs Diesel glow plug service kit, 50823
Features: To remove and repair glow plugs for most diesel models.
Content:
- Three 6-pt. socket inserts with a 180 ° flexible head for 8 mm, 9 mm and 10 mm glow plugs
- Glow plugs removal rool
- Two M10 and M12 threading reaming tools to remove the carbon deposits in the glow plug chamber.
Made in China
Ford, Mazda & Volvo Engine timing tool set, 50658
Engine timing tool set – Ford, Mazda & Volvo, 50658
Designed for the belt or chain driven petrol or diesel Ford, Mazda and Volvo engines.
This Ford and Mazda petrol engine timing tool is a four-piece camshaft setting bar that is suitable for all the applications including the latest HWDA, HWDB, HXDA, Zetec and Duratec engines.
This automotive tool covers a huge range which include 1.25 L, 1.4 L, 1.6 L and 1.6 L 16V Ti-VCT engines as well s the 1.8 L, 2.0 L and 2.3 L 16V engines.
Set is suitable for these engines in Mazda and Volvo vehicles.
OEM Tools: Ford; 303-1054, 303-507 (21-210), 303-620 (21-163), 303-574, 303-748, 303-376 (21-162B), 303-376B, Mazda; 49 JE01 061, 303-574, 49 JE02 061, 303-465, 49 JE01 054, Volvo; 999 7152, 999 7151
Applications:
Ford: C-MAX (07-10), Cougar (98-01), Fiesta (95-15), Focus (98-11), Focus C-MAX (03-07), Fusion (02-12), Galaxy (06-12), Mondeo (93-12), Puma (97-02), S-MAX (06-12), Tourneo Connect (02-06), Transit (06-12), Transit Connect (02-06)
Mazda: 121 ZQ (95-00), 2 DY (02-07), 3 BK (03-09), 3 BL (09-15), 5 CR (05-10), 5 CW (10-12), 6 GG/GY (02-07), 6 GH (07-15), MPV LW (02-05), MX-5 NC (05-15), Tribute EP (04-06)
Volvo: C30 (06-13), S40 (06-12), S80 (07-11), V50 (04-12)
Hose clamp pliers, 50738
Hose clamp pliers, 50738
Features: To remove and install clamps for hose connections in hard-to-reach areas.
With ratchet locking mechanism.
Comfortable handle with ergonomic grip.
Vacuum and fuel hose pliers, 50737
Vacuum and fuel hose pliers, 50737
For easy removal hose fuel and vacuum system
Working part: 35 mm
Hose dimensions: 4 - 12.5 mm (5/32 "- 1/2")
Opel/Vauxall и Chevrolet 2.0 SOHC 16V Diesel engine Timing tool kit, 50700
Opel/Vauxall и Chevrolet 2.0 SOHC 16V Diesel engine Timing tool kit, 50700
Developed for the late Vauxhall/Chevrolet 2.0 Common Rail diesel engine this kit holds the correct position of the camshafts and crankshaft whilst changing the timing belt on SOHC 16V engines.
Content:
- Crankshaft Locking Pin
- Camshaft Locking Tool
(OEM: EN-48245, EN-48246)
Models:
- Opel Antara 2.0
- Opel Insignia 2.0
- Chevrolet Captiva 20lt VCDi
- Chevrolet Cruze 20lt VCDi
- Chevrolet Epica 20lt VCDi
- Chevrolet Lacetti D
- Chevrolet Nubira 2.0lt D
Engine Codes: Z20DM; Z20DMH; LLW/Z20DMH; RA420; Z20S1, Z20S3; Z20S4; Z20S5; A20DTJ ...
Made in China