NEGEL TOOL BOX

Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A

Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.

Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)

Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0

OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760

Made in China

10 pcs 3/8" Dr. Impact twist socket set, 50927А

Specially designed to remove rounded nuts and bolts.

Content:
Inserts 3/8 ": 10; 11; 12; 13; 14, 15; 16; 17; 19 mm
8 mm extension bar
Material: Cr-Mo
Recommendation: Wear safety glasses when using these tools.
Keep sockets free from dirt and solvents to prolong life.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in: China

9 pcs Panel beating set, 50926

Made of high-grade high-carbon steel.
It contains 4 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
N.W. : 9.7 kgs

Made in: China

7 pcs Auto body repair set, 50209

Made of high-grade high-carbon steel.
It contains 3 models of ergonomic grippers, as well as adapters, necessary to straighten the car's dents.
Contains:
1pc standard bumping hammer
1pc pick and finish hammer
1pc reverse curve hammer
1pc curved dolly
1pc utility dolly
1pc double end hand dolly
1pc shrinking dolly.
Made in China

10 pcs Tube flaring tool set, 50703

For metal tubes and pipes with a wall thickness of 0.7 and 1.0 mm.
Pipe diameter 4.75 - 10 mm.
For open (F) or double (E) flares according to DIN 74234, for normal 90° and 180° flares.
For flares on rolled and drawn pipes.
With replacesble hinged griping jaws.

3 Jaws Gear puller 3”, 50742C

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 6”
Capacity: 60 – 152 mm

Made in: China

3 Jaws Gear puller 4”, 50742B

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 4”
Capacity: 50 – 102 mm

3 Jaws Gear puller 3”, 50742A

Heat treated, forged alloy steel with rust-resistant.
Precision-machined, hardened and tempered, self-centering steel screw with black finish.
Zinc plated jaws and hardware.
Removes gears, pulleys, flywheels, etc, from shaft.
Applies even pressure to prevent damage.

Puller Size: 3”
Capacity: 40 – 76 mm

5 pcs Trim fastener and molding removal set, 50241

Set includes five different sizes and styles of tools that allow easy removal of trim fasteners, moldings and wheel hubs.
Tools are made of plastic to prevent damage to trim, moldings, alloy wheels or vehicle paint.
Can be used on trim fasteners and moldings inside or outside

Windshield Removal Tool Set, 50220

This universal kit includes all of the specialised tools required to safely and quickly remove windshields from a wide variety of vehicles.
Item is supplied with a rubber gasket knife, cutting wire, two (2) handles, wire feeder tool, trim pad remover and molding release tool.

Set includes:

- Wire: Three strong galvanised steel wires braided to form one wire
- 2 pcs Wire gripping handles: Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held.
- Windshield removal tool: Cuts the vinyl adhesive compound around the windshield.
- Wire feeder tool: Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield
- Trim pad remover: Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.
1PC stainless steel wire with reel.
2PCS Wire gripping handles.
1PC Windshield removal tool
1PC Wire feeder tool
1PC Trim pad remover
1PC Windshield molding release tool

Made in China

Labor Saving wrench, 50216

Labor Saving wrench adopt the highly effective and variable speed as a main drive, which function is small volume, light weight, Due to the big variable ratio, the less input power will come into being more output wrest distance, The product select high-grade alloy steel and the superior craft of heart treatment, firm and durable, high effective and saving, the appearance of using spray polishing, and have a good feeling. This products are used in kind of heavy-duty truck tire widely, and it is the necessary tool of auto repairman and the handy tool driver friends.

The biggest security output torque - 3800N.M.
Total length: 310 mm
Torque: 3800 Nm
Gear rate: 1:58
Impact socket: 32 mm; 33 mm

Made in China