NEGEL TOOL BOX

Ball Joint assembly and disassembly tool for Mercedes

Specifically designed for Mercedes-Benz (W220, W211, W230).
This tool removes and installs the lower ball joints whilst insitu without removing parts, saving time and money.
High quality forged C clamp is manufactured from CR-MO.
Tools are labelled for extraction and installation. Heavy duty type.
Contents:
- 160 mm compression spindle with 24 mm hex drive
- 2 compression heads 40 mm and 54 mm
- 3 pressure pads 22 mm, 33 mm and 57 mm

17 pcs Diesel injector seat cutter set, 50682
This set is used to clean and decarbonise injector seats when changing injectors.
It helps to avoid blow-back due to poorly seated injectors.
Suitable for a wide range of vehicles of modern Common Rail Vehicles with injectors from Delphi and Bosh.

Contents:
14mm x 14mm Flat Reamer (for AUDI)
15mm x 19mm Flat Reamer
15.5mm x 15.5mm Flat Reamer
15.5mm x 15.5mm Angled Reamer
17mm x 17mm Angled Reamer
17mm x 17mm Flat Reamer
17mm x 17.5mm Flat Reamer
17mm x 19mm Flat Reamer
17mm x 19.5mm Flat Reamer
17mm x 20mm Flat Reamer
17mm x 21mm Angled Reamer
17.5mm x 20.5mm Angled Reamer
19mm x 21.5mm Flat Reamer
T-handle; Pilot Hex 19 x 170mm; 15.5 X 250mm Cutter; 2.5mm Hex Key

Made in China

1/2"Dr Injection Line socket

Set of special open twelve-walled keys for unwinding and turning the nuts of the high pressure tubes to the fuel nozzles or the pump.
Suitable for BMW Diesel engines and OPEL 2.5 TD engines.
Material: Cr-V
Size: 14; 17; 19 mm ...

1/2" Dr. Ratchet handle, G0001

72 teeth

Made of CR-V

Made in China

15 pcs Cup type oil filter wrench, 50037

Sizes::

• 65 mm, 14 pt.: CHAMP, HASTINGS, GM/Ac, WIX, NAPPA, PUROLATOR, DAIHATSU, TOYOTA, NISSAN
• 65-67 mm 14 pt.: Kanadai modellek HP4386, HP4967, HP6017, HP6018, DAIHATSU
• 68 mm 14 pt.: HASTINGS, MAZDA, FORD ESCORT, CAPRI, SUBARU, FRAN PH6607, MOTORCRAFT FL816
• 73 mm 14 pt.: TOYOTA, LEXUS
• 74-76 mm 15 pt. : FRAM, AC, STAUM
• 75-77 mm 15 pt.: VW, AUDI, CASITE, GM/AC, HASTINGS, WIX, NAPA FORD, ISUZU, MERCEDES, OPEL
• 74-76 mm 15 pt.: FRAM, AC, STAUM
• 76mm 30 стенен: MOTORCRAFT FL400A, FORD
• 80 mm 15 pt.: HASTINGS, FRAM, PUROLATOR, NISSAN, HONDA, MOTOCRAFT, MAZDA, ISUZU, SUBARU, OPEL, TOYOTA
• 82 mm 15 pt.: MAZDA, SUBARU, TOYOTA, HONDA
• 90 mm 15 pt.: HONDA ACCORD, MITSUBISHI, MOPAR, ISUZU
• 93 mm 15 pt.: CASITE, CHAMP, CHAMPION, GM, FRAN, HASTINGS, OPEL, MAZDA, VOLVO, MITSUBISHI, PUROLATOR, WIX, NISSAN, VW, PORSCHE, RENAULT, FORD, HONDA, AUDI
• 93 mm 36 pt.: MOTOCRAFT FL1A, FLA1B, FL300, FL820, FORD
• 100 mm 15 pt.: FARM, MOTOCRAFT, WIX, ISUZU MITSUBISHI

18 pcs Universal caliper wind back set, 50060
• Provides both left-handed and right-handed thrust bolt assemblies
• Complete set of adaptors for a wide range of vehicle applications
• Designed for push back and wind back brake pistons
• Left-handed thrust bolt required for Ford, Citroen, and Renault applications
• Adaptor plates with thrust bolt assembly and reaction plate are precisely made
• Prevents damaging pistons and seals
• Updated adaptor set applicable for wide variety of vehicles"

21 PCS Universal Brake Caliper Wind Back Kit Suitable for push back and wind back brake pistons. Includes left- and right-handed thrust bolt assemblies. Left-handed thrust bolt required for Ford, Citroen and Renault applications. Adaptor plates with thrust bolt assembly and reaction plate. Helps prevent damage to pistons and seals. Updated adaptor set suitable for a wide variety vehicles. Supplied in carry-case.

12 pcs Bearing separator 30-75 mm, 50132

Bearing separator included 30-50 mm & 50-75 mm. Pull out the bearing wth the H-type beam and bolts.
Bearing separator tools are used with bar puller and legs for a wide variety of pulling jobs.

17 pcs proffesional slide hammer/puller set, 50139A
Features:
Designed to use with other 5/8" - 18 thread slide hammer attachments.
Internal and External jaws provide a variety of combinations to pull bearings, gears and seals
Pulls flange-type rear axle and most front wheel drive hubs.
Set includes grip wrench adapter and dent puller
Two and three way cross blocks and cone provide perfect jaw configuration for many jobs
Drop forged steel puller and fully hardened shaft and accessories.
Converts in to 2 or 3 jaw internal / external puller.

Fuel injection test set, 50199

The car fuel pressure diagnostic kit is suitable for most vehicles with a fuel injection system with petrol or gas engines (except Bosch, CIS Jetronic, Throttle Body Systems on GM cars).
Not suitable for diesel engines with high pressure injection pump or direct injection engines due to the low pressure range of the manometer.
Fuel pressure testing is an essential part of the fuel injection system troubleshooting process.
Contents:
The set is equipped with various fittings and connection hoses for testing.
15 "length hose is used for direct connection to 1/4" SAE standard fuel pump shredder valve
An 8 "length hose is for the M6 ​​fuel pressure test hole, and there are also adapters M8; M10; M12; M14 for the corresponding test port on fuel rail.
Aluminum tee to support the connection between the fuel pump and the engine for most cars.
Manometer, protected with a rubber shell, with a diameter of the dial 3-1 / 2 ", with a range of 0-10bar (0-140psi) and two-color coded scale for easy reading. The hoses use rubber nylon resin and the built-in nylon can strengthen the hose with increased stress resistance. The pressure relief valve and 16 "fuel drain hose help to safely release the pressure and easily restore the fuel.
Fuel pump pressure check:
The manometer is designed to easily and quickly check the pressure of the fuel injection pump and the fuel flow.
You can compare the pressure value with the manufacturer's recommended reference range to help diagnose the petrol engine system.
Low fuel pressure can be caused by kink/leak/clog on inlet supply side components, a bad fuel pump or regulator, low tank pressure
High fuel pressure may be caused by a bad fuel pressure regulator or kincked outlet return line.

Made in China

4 pcs Nut splitter set, 50227

Made of mechanically drop forged, hardened and galvanized steel.
Ideal for breaking splitting of seized or damaged pliers.
Size:
5/16 "- 1/2" (9-12 mm)
1/2 "- 5/8" (12 - 16 mm)
5/8 "- 7/8" (16-22mm)
7/8 "- 1-1 / 8" (22 - 27 mm)

4 pcs Fluid line clamp set, 50230

Used to stop the flow of fluid without damaging the hose integrity.
Suitable for fuel, transmission, vacuum, breake ect.
Size:
- 10 mm (3/8”)
- 12.5 mm (1/2”)
- 25 mm (1”)
- 45 mm(1-3/4”)

Camshaft pulley locking tool - Renault 1.4-1.6 16V, 1.8 16V, 2.0 16V, 50621

Designed to allow the correct alignment on the engine pulleys when replacing the cambelts on the 1.6 16v petrol engine.
For 1.6 16v engines.
OEM: 1490-01.
Applicalbe: Clio II / III, Clio sport, Kangoo, Laguna, Modus, Megane II, Scenic, Grand Scenic, Espace.
Nissan: Qashqai, Note

Code: 520028

Made in China

28 pcs Cooling system radiator pressure tester kit, 50508

Description:
Universal Pressure Heat Tester and Drain and Charge Cooling Kit for Vacuum Cooling System.
Color coded test caps.
Pump with spout and quick connection, pressure valve, pressure gauge, working pressure 0-35 psi - 1 pc.
Radiator adapters for pressure testing and leakage - 17 pcs.

 

Diesel engine setting / locking set - 1.3D JTD (M) / TDCi / DDiS / CDTi 16v Chain Drive, 50310A

Suitable for synchronizing camshaft and crankshaft with chain drive 1.3. The set also has a locking pin for tensioning.
OEM Tools:       
Alfa Romeo/Fiat/Lancia: 1.871.00.900,
Ford:  303-1472,
Suzuki:  09912-38300, 09916-98610, 09917-68610,
Vauxhall/Opel: EN-46781, EN-46785, KM-955