NEGEL TOOL BOX

Overhead valve spring compressor, 50109

Description: This overhead valve spring compressor is ideal for removing valve springs, spring retainers by compressing the valve spring retainer and exposing the valve keeper, remove keepers, uncompressing the tool then remove spring. It features a reversible jaw / adaptor and automatic cam-action locking to a re-determined setting.
Specifications:
Easy to operate
Cam action level design for secure valve spring locking into the tool
Allow valve springs and valve stem oil seals to be replaced with the cylinder head
Tool spring depth reach grips to retainer are adjustable to fit most large and small spring applications
For use on a wide range of OHV, OHC and CHV engines.
Not suitable for use on engines with deep seated valves

Made in China

Draper Bearing, Seal and Bush Insertion/Extraction Kit (26 piece), 50092A

Expert Quality, bearing, seal and bush insertion and extraction kit, perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc.
Each kit comprises of 22 adaptor rings and five fine thread puller bars with hex. nut ends, contents of each kit is the following:

1 x 34mm x 44mm adaptor ring, 1 x 36mm x 46mm adaptor ring, 1 x 38mm x 48mm adaptor ring, 1 x 40mm x 50mm adaptor ring, 1 x 42mm x 52mm adaptor ring, 1 x 44mm x 54mm adaptor ring, 1 x 46mm x 56mm adaptor ring, 1 x 48mm x 58mm adaptor ring, 1 x 50mm x 60mm adaptor ring, 1 x 52mm x 62mm adaptor ring, 1 x 54mm x 64mm adaptor ring, 1 x 56mm x 66mm adaptor ring, 1 x 58mm x 68mm adaptor ring, 1 x 60mm x 70mm adaptor ring, 1 x 62mm x 72mm adaptor ring, 1 x 64mm x 74mm adaptor ring, 1 x 66mm x 76mm adaptor ring, 1 x 68mm x 78mm adaptor ring, 1 x 70mm x 80mm adaptor ring, 1 x 72mm x 82mm adaptor ring, 1 x 75mm x 85mm adaptor ring, 1 x 80mm x 90mm adaptor ring, 1 x M10 pulling spindle, 1 x M12 pulling spindle, 1 x M14 pulling spindle, 1 x M16 pulling spindle.

Made in China

Draper Bearing, Seal and Bush Insertion/Extraction Kit (27 piece), 50092

Expert Quality, bearing, seal and bush insertion and extraction kit, perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc.
Each kit comprises of 22 adaptor rings and five fine thread puller bars with hex. nut ends, contents of each kit is the following:

1 x 34mm x 44mm adaptor ring, 1 x 36mm x 46mm adaptor ring, 1 x 38mm x 48mm adaptor ring, 1 x 40mm x 50mm adaptor ring, 1 x 42mm x 52mm adaptor ring, 1 x 44mm x 54mm adaptor ring, 1 x 46mm x 56mm adaptor ring, 1 x 48mm x 58mm adaptor ring, 1 x 50mm x 60mm adaptor ring, 1 x 52mm x 62mm adaptor ring, 1 x 54mm x 64mm adaptor ring, 1 x 56mm x 66mm adaptor ring, 1 x 58mm x 68mm adaptor ring, 1 x 60mm x 70mm adaptor ring, 1 x 62mm x 72mm adaptor ring, 1 x 64mm x 74mm adaptor ring, 1 x 66mm x 76mm adaptor ring, 1 x 68mm x 78mm adaptor ring, 1 x 70mm x 80mm adaptor ring, 1 x 72mm x 82mm adaptor ring, 1 x 75mm x 85mm adaptor ring, 1 x 80mm x 90mm adaptor ring, 1 x M10 pulling spindle, 1 x M12 pulling spindle, 1 x M14 pulling spindle, 1 x M16 pulling spindle, 1 x M18 pulling spindle.

The set is in case.

Made in China

Universal ball joint puller, automobile, 23 mm, 50049

Specification:
External clamping width: 23 mm
Clamping depth: 65 mm
Width: 100 mm
Spindle length: 35 mm
Thread dimension: M14 x 1.5
Width across flats: 19 mm

Applicable:
For easy ejection of ball joint bolts, particularly for many cars from the following manufacturers: Audi, BMW, Fiat, Ford, Daimler-Chrysler, Opel/Vauxhall, Nissan, Toyota, VW, Volvo.

Door upholstery tack remover, 50939

Designed to remove the car door panel.
Comfortable extended handle.
Made of heat treated carbon steel.
Screwdriver length: 200 mm

Made in China

Diesel injection pump puller (BMW), 50698

This tool is speciically designed for holdin the sprocket/shain in place when disassmbling the VP44 injection pump and high pressure pump.
Common rail fitted to BMW engines:
318D / compact (Е46)
320D / TD compact(46)
330D (Е46) 525D (Е39)
525D (E60 / E61)
530D (Е39)
530D (E60 / E61)
535d (E60 / E61)
730D (Е38)
X5 3.0D (Е53)

Made in China

Harmonic Balancer Puller And Installer Kit, 50030
- Carbon steel, hardened, zinc plated
- Universal use: adapters incl. 9

Contents:
- 1 puller plate
- 12 screws, each 3 pieces:
3/8NC16 X 57 MM - 57 MM X 3/8NC24
M6 X 1.0 X 60 MM - M8 X 1.25 X 60 MM
- 1 center bolt 10 mm
- 9 adapters:
M12 X 1.5 - 3/8NC16
M14 X 1.5 - 3/8NC16
M16 X 2.0 - 3/8NC16
1 / 2 X NC20 - 3/8NC16
9 / 16 x nC18 - 3/8NC16
7 / 16 X NC20 - 3/8NC16
3 / 4 X NC16 - 3/8NC16
5 / 8 x nC18 - 3/8NC16
3 / 8 X NC16 - 3/8NC16

Made in China

5 pcs 1/2"Dr. Triangle socket M5-M12, 50639

New style security sockets
M5 (8mm), M6 (10mm), M8 (12mm), M10 (15mm), M12 (16.5mm) x 1/2"D
Manufactured from Chrome Vanadium
Applications include: Electrical light fittings. Electrical cabinet tamperproof fixings
    Supplied on a socket rail for storage
These new style security sockets (part number 5683) are designed for the triangular profile, tamperproof fixings found on VAG TDi engines (injection pump quality adjustor), Bosch injector and certain light fittings.
The five piece socket set includes M5 (8mm), M6 (10mm), M8 (12mm), M10 (15mm), M12 (16.5mm), all 1/2" drive and supplied on a socket rail for storage.

Made in China

5 pcs 1/2"Dr. Twist socket set

Socket size: 17 mm, 19 mm, 21 mm, 22 mm and 12 mm and drift punch.

THE USE OF A IMPACT WRENCH IS NOT RECOMMENDED!

Made in China

Water pump sprocket holder, 50864

Application:
For GM Ecotec; Holds the Timing Chain and Gear in Place While Removing or Installing Water Pump on Ecotec Engines.
Securely holds water pump sprocket preventing loss of timing or damage to the engine.
Special half-moon design allows easier access to water pump gear bolts.
Uses access cover bolts to hold the tool in place.

Made in China

Engine timing tool for VAG 1.2 TFSI, 50661

This generation of VAG 1.2 TFSI engines were first introduced in 2010 and are available in vehicles across the four main brands of the VAG Group (Audi, Seat, Skoda and Volkswagen.) These four cylinder, single camshaft engines, have two valves per cylinder. A timing chain provides drive between the crankshaft and camshaft. The engines are turbo charged and use a high pressure direct injection fuel system.
Content:
Crankshaft Locking Pin
Camshaft Setting Tool
Timing Cover Alignment Pins (2)
Models:
Audi A1, A3, A3 Sportback, A3 Cabriolet
Seat Altea, Altea XL, Ibiza, Ibiza Sportcoupe, Leon, Toledo
Skoda Fabia, Fabia Combi, Rapid, Oktavia, Oktavia Combi, Rommster, Yeti
Volkswagen New Beetle, Caddy, Golf, Golf Plus, Golf Cabriolet, Golf Variant, Jetta, Polo, Touran
Engine Codes: CBZA, CBZB, CBZC

Engine timing tool kit Opel & Vauxhall 1.6 16V, 1.8 16V, 50651

Suitable for timing applications on all 1.4, 1.6 and 1.8 Twin port petrol engines with belt drive.
Kit comprises camshaft setting tools and Belt tensioner locking pins.
Applications:
Holden/Vauxhall/Opel:: Astra-G (03-06), Astra-H (04-12), Astra-J (09-13), Corsa-D (07-13),
(06-10), Signum (06-08),Vectra-C (06-08), Zafira-B (05-13), Zafira-C Tourer (11-13)
Chevrolet: Aveo (08-13), Cruze (09-12), Orlando (11-13)
Saab: 9-5 (10-12)
Fiat: Croma (06-11), Stilo (05-08)
Alfa Romeo: 159 (05-10)
Кодове на двигателя:
1.4 16V: G14D
1.6: A16LEL, A16LER, A16LET, A16XER, LDE/A16LER, DE/A16XER, LLU/A16LET, Z16LEL,Z16LER, Z16LET, Z16XE1, Z16XEP, Z16XER 192B3.000(Z16XEP)
1.6 ecoFLEX CNG: A16XNT, LGE/A16XNT, Z16XNT
1.8: 2HO/A18XEL, 2HO/A18XER, A18XER, Z18XER, 939A4.000

OEM №: KM-911, KM-6625/EN-6625/2.000.012.800, KM-6340/EN-6340/2.000.012.100, KM-6349/KM-6130/EN-6349, KM-6333/EN-6333, KM-6628-A/2.000.012.000

Made in China

Еngine timing tool kit for VAG 2.5 / 4.9D / TDI PD, 50617
Set comes with:
Camshaft Locking Tool 10 Cylinder - OEM T10194
Clamping Device - OEM T10199
Rotating crankshaft socket (5 Cylinder) - OEM T10225
Crankshaft Locking Wrench (5 Cylinder) - OEM T10226
Aplicable:
Transporter T5 / Caravelle 2.5 TDI PD 2003-2011
Touareg 2.5 TDI PD, 4.9 5.0 V10 TDI 2003-2011
PHAETON 4.9 5.0 V10 TDI 2002-
Engine Codes:
2.5 TDI- AXD, AXE, BAC, BLJ, BLK, BPD, BPC, BPE and BNZ
4.9 5.0 TDI- AYH, AJS, BLE, BWF

Universal tie rod wrench, 50443

The mster tie rod tools easily replace inner tie rod ends from 33-42 mm diameter without removing the rack and pinion.
Work with 1/2" square drive tools.

Diesel/Petrol VAG 1.9; 2.4; 2.5, 2.7, 2.8 - Belt drive camshaft sprocket remover, 50329

Specially designed to remove amshaft sprockets with 5 and 6 spikes from Audi, Vw, Skoda vehicles.
Features ball and thrust screw to eduse damade to camshaft bolt.

Applications
Diesel engines:    
1.9D SDi/Tdi: Audi; A3 (96-03), Seat; Ibiza/Cordoba (99-02), Leon (00-05), Toledo (99-05), Skoda; Octavia (97-06), VW; Beetle (98-04), Bora (97-05), Caddy (95-04), Golf (97-05), Polo (99-02)
2.5D Tdi V6: Audi; A4 (97-09), A6 (97-05), A6 Allroad (00-05), A8 (97-02), Skoda; Superb (02-08), VW; Passat (98-05)
2.5D TDiCR: VW; Crafter (06-12)
Engine Codes - Diesel:    
1.9D SDi/Tdi: AGP, AGR, AHF, ALH, AQM, ASV
2.5D TDiV6: AFB, AKE, AKN, AYM, BAU, BCZ, BDG, BDH, BFC
2.5D TDiCR: BJJ, BJK, BJL, BJM, CEBA, CEBB, CECA, CECB
Petrol engines:    
2.4, 2.7T, 2.8 V6: Audi; A4 (94-09), RS4 (00-02), S4 (97-01), A6 (95-05), A6 Allroad (00-05), A8 (96-10), Skoda; Superb (02-08), VW; Passat (96-05)
3.7, 4.2 V8: Audi; A6 (99-05), S6 (00-04), A8 (99-09), S8 (99-03), RS6 (03-05), VW; Touareg (03-07), Phaeton (03-15)
Engine Codes - Petrol:    
2.4 V6: AGA, AJG, ALF, ALW, AML, AMM, APL, APS, APZ, ARJ, ARN, ASM, BDV
2.7T V6: AGB, AJK, ASJ, ARE, AZA, AZB, AZR, BES
2.8 V6: ACK, AGE, AHA, ALG, AMX, APR, AQD, ATQ, ATX, BBG
3.7 V8: AKC, AQG, BFL
4.2 V8:    AKB, ANK, AQF, AQH, AQJ, ARS, ART, ARU, ASG, AUX, AVN, AVP, AUW, AWN, AXQ, AYS, BBD, BCS, BCY, BFM, BGH, BGK, BHX, BJG, BRV

OEM Tool: T4000;T40001

Made in China