PROFESSIONAL PNEUMATIC TOOLS
Pneumatic CV Joint Boot Inastallation tool, 50425
Pneumatic CV Joint Boot Inastallation tool, 50425
It is used for mounting elastic CV boots without removing drive shafts from the vehicle or the CV joint from the drive shaft.
Used with air compressor.
Suitable for rubber bellows. The tool is not suitable for PVC boots.
Diameter of the boot: 20 - 110 mm
Material: Aluminum steel
Maximum pressure: 8 Bar (116 Psi)
Air Inlet: 1/4 "
Made in China
RP1000 Professional air spray gun
RP1000 Professional air spray gun
Professional RP technology guarantees transfer efficiency rates significantly above the required 65% by VOC legislation.
Ergonomically spray gun body in state-of-the-art design with small dimensions and low weight for fatigue-free working.
Perfect for the application of paint coats and clear coats painting.
Paint needle and nozzle are made of stainless steel
Self-adjusting air and material packing with a long life time significantly reduce the need for servicing
Comfortable and light needle gun trigger integrated baffle, reduce adhesion of the entire needle while flying paint wear and tear caused by seals
Paint-saving efficient top coating spray gun
Gravity type
Atomization Technology:L.V.M.P
Use for: topcoat / varnishes
Standard Nozzle size(mm): 1.6, 2.0
Optimal working pressure: 2.5Bar/36Psi
Air consumption: 250~380L/min
Made in China
H.V.L.P. 4001 Suction air spray gun
H.V.L.P. 4001 Suction air spray gun
4001 Suction spray gun is a traditional heavy duty spray gun are deal for primer and large area refinishing. High efficiency and quick transfer afford labor saving, ideal for primer and vehicles or furniture coating. The gun is popular in the market and easy operation, Teflon seals offer durability and long time use.
Feed type: Suction
Technology: H.V.L.P.
Optimal working pressure(bar/psi): 4.0/57
Pattern width(cm): About 24
Air consumption: 200-340 l/min.
Capacity of cup(ml): Aluminum 1000ml
Nozzle size(mm): 1.8
Inlet tip size: 1/4 (bsp /npt/nps)
N.W.: 1.2kgs
Made in China
Code:
513063 - nozzle 1.4 mm
513018 - nozzle 1.8 mm - OUT OF STOCK
513064 - nozzle 2.0 mm- OUT OF STOCK
190mm Penuamtic air hammer with 4 Round/Hex Chisel Shank, 93969
190mm Penuamtic air hammer with 4 Round/Hex Chisel Shank, 93969
Features:
Heavy duty
Super power for car tire maintenance & assembly line
Specification:
Chisel shank: 0.401(0.410)
Bore diameter: 3/4"(19.05mm)
Piston stroke: 2-5/8"(66mm)
Blow per min.:3500
Air inlet: 1/4"
N.W.: 1.44 kgs
Made in China
R.P. H-887 Spray gun
R.P. H-887 Spray gun
The needle tip is specially treated.
With Teflon O-rings for better sealing and durability. Allows operation with a wide range of fluids without the risk of damaging the seals
Tank of high quality material, durable and resistant to falling, with a long service life.
Flow control valve, handle with non-slip design.
The trigger of the pistol is flexible for work and convenient to use.
Application: in the automotive industry, for decoration, for the home, for wooden products and other products.
Suitable for paints with different viscosities.
Gravitational type
Optimal working pressure (bar / psi): 3-4 / 43-58
Coverage width (cm): About 24
Working distance: 15-20cm
Air consumption: 390 l/min
Tank capacity (ml): Plastic 600ml
Nozzle size (mm): 1.4 mm
Inlet tip size: 1/4 (bsp / npt / nps)
Weight: 0.800 kg
Air Body Saw 93970
Air Body Saw 93970
It is used for cutting and shaping of a wide range of metal and plastic materials.
Cast aluminum body.
Rubber handle with ergonomic grip.
Speed and cutting efficiency.
Application: For cutting through rods, pipes, bars and even 16 gauge sheet metal with speed and efficiency
Technical Data:
Stroke per minute: 10000 spm
Stroke Lenght: 8-10 mm
Cutting capacity (steel): 1.5 mm)
Cutting capacity (aluminum): 2.0 mm
Air Pressure: 6 Bar
Air Inlet: 1/4”
Air Hose: 3/8" (I.D.)
Avg.Air Consumption: 4 cfm (114 l/min.)
N.W.: 0.65 kgs
H.V.L.P. K665G Professional Spray gun
H.V.L.P. K665G Professional Spray gun
K665G spray gun is a high level quality offer good atomization and durable using life for automotives and industrial use.
Excellent spraying efficiency, few or no overspray, saving materials and environmental.
Stainless steel nozzle sets and Teflon seals offer durability and long time use.
HVLP technology ensure transfer efficiency above 65%
Provide 0.6L and anti-drip cups.
Gravity type
Technology: H.V.L.P.
Optimal working pressure:3-5 bar
Air consumption: 390L/min
Pattern width: About 24cm
Working distance: 15-20cm
Nozzle size: 1.4; 1.7 or 2.0mm
Tank capacity: Plastic, 600ml
Inlet tip size: 1/4 (bsp / npt / nps)
N.W.: 0.800kgs
H.V.L.P MP105 Mini Professional air spray gun
H.V.L.P MP105 Mini Professional air spray gun
MP105 is a high level quality detail refinishing spray gun which use HVLP technology to save paints and get fine atomization.
The stainless steel air cap and nozzle are suitable for both solvent paint and water borne paints.
Ideal for top coating and clear coating for automotive and high level furniture detail refinishing.
Teflon seals insides afford long time using and durability.
Atomization Technology:H.V.L.P
Use for: topcoat / varnishes/ detail refinishing
Gravity type
Nozzle size(mm): 0.8
Optimal working pressure: 1.5bar/21psi
Air consumption: 190L/min
Pattern width (cm): About 10
Tank capacity: 250ml
Air Inlet: 1/4(bsp/npt/nps)
Air lubricator AL80
Air lubricator AL80
Prodessional quality
- Aluminum - casting valve body witch is light but it is durable
- High quality core, filtrate with high precision
- The cup made of high-intension material (poly carbonate), safe and credible
- Can adjust exactly oil
Specification:
Rated flow: 800 l/min
Port size: 1/2"
Rated Pressure: 0 - 150 psi
Max.Pressure: 220 psi
Made in China
5" (125mm) Sanding pad
5" (125mm) Sanding pad
Size: 5"х5/16"х24mm
Max. operating speed: 12000 rpm
Made in China
6" (150mm) Sanding pad
6" (150mm) Sanding pad
Size: 6"х5/16"х24mm
Max. operating speed: 12000 rpm
Made in China
L.V.M.P. K-400 Professional spray gun
L.V.M.P. K-400 Professional spray gun
Professional pneumatic spray gun for work in garages and furniture shops. Suitable for paints with different viscosities.
K-400 spray gun apply to paints and varnishes.
LVMP technology classic comfortable handle, showing incredible handling and balance;
Innovative trigger design, handle smoothly and comfortable, very easy to clean and maintain.
Extremely delicate matt chrome finish, the gun body looks Like a fine work of art.
Provide 0.6L and anti-drip cups.
Technology: L.V.M.P. (Small Volume, Medium Pressure).
It is used to obtain uniform coating, fast and effective paint application.
This technology allows paint savings of 5-15% compared to traditional paint spray guns.
Gravity type
Optimal working pressure:3-5 bar
Air consumption: 300L/min
Pattern width: About 24cm
Working distance: 15-20cm
Nozzle size: 1.0; 1.4 or 2.0mm
Tank capacity: Plastic, 600ml
Inlet tip size: 1/4 (bsp / npt / nps)
N.W.: 0.800kgs
Air Inflator w/ gauge, 50189
Air Inflator w/ gauge, 50189
Feature:
Body ALUM
Air Inlet: 1/4" Male
Operating Pressure: 90 PSI.
Air Flow 1.03 CFM at 100 PSI.
Function:
1. Fill Air. (inflation)
2. Release Air. (deflating)
3. Gauge Pressure. (measuring)
Specification:
- Body:Pistol Grip
- Gauge:Rubber Protected 2"
A. 0-220 PSI
B. 0-15 kg/cm2
C. 0-15 bar
D. 0-1500 kPa
- Rubber Hose 1/4" 32 CM & Clip
Professional Car air tire inflator with gauge, TG-5
Professional Car air tire inflator with gauge, TG-5
Measuring clock: Analog (diameter 45mm)
Unit: Bar, Psi, kPa, kg/cm3
Hose lenght: 450mm
Measuring range: 0-15Bar
Air Inlet: 1/4
Rated Pressure: ≤150psi
Max. Pressure: 220psi
N.W.: 0.500 kgs
Made in China
TG-6 Tire inflating gun
TG-6 Tire inflating gun
Air Inlet: 1/4
Rated pressure: ≤150psi
Max. Pressure: 220psi
N.W.: 0,500 kgs
Made in China