UNDER CAR TOOLS
1/2”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037А
1/2”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037А
Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axle.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm
• H: 32 mm
Made in Taiwan
3/4”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037B
3/4”DR. Pin Wrench Socket For Mercedes-Benz M-Class (W163/W164), 846-7037B
Application: For Mercedes Benz ML class W163 until June 2005 and W164 from 2005
To replace hinges on the front and rear axles.
Facilitates loosening and tightening the torque lock nuts with correct torque
Suitable for lower suspension connections on the front and rear axles
• Application: For Mercedes-Benz M-Class hinges (W163 / W164) on the front and rear axles.
• Used to fasten the retaining ring during the replacement of the ball joints.
• Precision fitting.
• Material: Cr-Mo
• Inside Diameter: 52 mm
• Outside Diameter: 63 mm.
• H: 60 mm
Made in Taiwan
Benz strut nut socket, 780-9002
Benz strut nut socket, 780-9002\
Features:
Specifically designed for Mercedes-Benz C Class W203
Applicable:
Mercedes-Benz C Class 2000-2008 C203 front suspension strut top nuts (Shock absorber piston rod top nut).
Also fits W209 CLK 2003-2008
Used with a 7 mm Hex key to hold strut in place whilst tightening
22 mm Hex drive
Selected steel
Made in Taiwan
VW & AUDI Strut nut socket, 210-0155-AT
VW & AUDI Strut nut socket, 210-0155-AT
Features:
Suitable for the disassemble and installation of top shock retaining nut.
Used with 22mm spanner wrench.
Material: Heat treated and tempered chrome molybdenum steel (CR-MO)
Overall Length: 44mm
Applications: Most Audi & VW front wheel drive vehicles.
Made in Taiwan
51 mm Lower ball joint socket for Peugeot/Citroen, 210-0215-51
51 mm Lower ball joint socket for Peugeot/Citroen, 210-0215-51
Features:
Suitable for removal of OEM and aftermarketlower ball joints on Peugeot and Citroen.
Profile: 51 mm x 35 mm
Length: 45 mm
Made in Taiwan
Lower ball joint socket for Peugeot/Citroen, 210-0215-60
Lower ball joint socket for Peugeot/Citroen, 210-0215-60
Features:
Suitable for removal of OEM and after market lower ball joints on Peugeot and Citroen.
Profile: 60mm x 38 mm
Length: 45 mm
Made in Taiwan
BMW 3 Series - Ball Joint Remover / Installer set, 50040
Ball Joint Remover / Installer for BMW 3 Series, 50040
The kit is suitable for disassembling and mounting the BMW 3 series supporting joints.
Allows the joint to be dismantled without removing the hanger arms.
The tools are made of high quality steel.
Thanks to the replaceable piston elements, the tool can be used more widely for other car models as well as for hydraulic and plastic bushings and bearings.
The set is in blue case.
Labor Saving wrench, 50216
Labor Saving wrench, 50216
Labor Saving wrench adopt the highly effective and variable speed as a main drive, which function is small volume, light weight, Due to the big variable ratio, the less input power will come into being more output wrest distance, The product select high-grade alloy steel and the superior craft of heart treatment, firm and durable, high effective and saving, the appearance of using spray polishing, and have a good feeling. This products are used in kind of heavy-duty truck tire widely, and it is the necessary tool of auto repairman and the handy tool driver friends.
The biggest security output torque - 3800N.M.
Total length: 310 mm
Torque: 3800 Nm
Gear rate: 1:58
Impact socket: 32 mm; 33 mm
Made in China
Heavy duty CVboot clamps plier for driveshaft, 50111
Heavy duty CVboot clamps plier for driveshaft, 50111
Application: To install of new stainless steel clamp-bands on drive-shafts where torque setting is required.
Material: Cr-Mo, chrome plated
Length: 270 mm
Maximum opening size of the jaw: 42 mm
Torque: 23-30 Nm
Suitable for VW, Audi, Seat, Skoda, Opel / Vauxhall and Ford.
Made in China
Coil spring compressor 5/8" - 10 Square thread, 741-0107A
Coil spring compressor 5/8" - 10 Square thread, 741-0107A
Tempered Chrome-molybdenum steel jaws with ACME threaded lead screw quickly & safely compress coil springs on all passenger cars & pick up trucks.
Size: 300 mm
Made in Taiwan
Coil spring compressor 5/8" - 11 UNC, 741-0107
Coil spring compressor 5/8" - 11 UNC, 741-0107
Tempered Chrome-molybdenum steel jaws with ACME threaded lead screw quickly & safely compress coil springs on all passenger cars & pick up trucks.
Lenght: 300 mm
Made in Taiwan
Universal ball joint separator 22 mm, 211-0163
Universal ball joint separator 22 mm, 211-0163
This tool is used to separate the ball joint from the spindle support arm
Applicable: Audi, BMW, Ford, Honda, Mercedes-Benz, Nissan, Opel, Renault, Seat, Skoda, Toyota, Volkswagen and Volvo.
Adjustable for Different Size Ball Joints
1-1/8" & 2-1/8" (30 - 56 mm) Maximum Opening Capacity
Lifetime limited warranty
Draper Bearing, Seal and Bush Insertion/Extraction Kit (26 piece), 50092A
Draper Bearing, Seal and Bush Insertion/Extraction Kit (26 piece), 50092A
Expert Quality, bearing, seal and bush insertion and extraction kit, perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc.
Each kit comprises of 22 adaptor rings and five fine thread puller bars with hex. nut ends, contents of each kit is the following:
1 x 34mm x 44mm adaptor ring, 1 x 36mm x 46mm adaptor ring, 1 x 38mm x 48mm adaptor ring, 1 x 40mm x 50mm adaptor ring, 1 x 42mm x 52mm adaptor ring, 1 x 44mm x 54mm adaptor ring, 1 x 46mm x 56mm adaptor ring, 1 x 48mm x 58mm adaptor ring, 1 x 50mm x 60mm adaptor ring, 1 x 52mm x 62mm adaptor ring, 1 x 54mm x 64mm adaptor ring, 1 x 56mm x 66mm adaptor ring, 1 x 58mm x 68mm adaptor ring, 1 x 60mm x 70mm adaptor ring, 1 x 62mm x 72mm adaptor ring, 1 x 64mm x 74mm adaptor ring, 1 x 66mm x 76mm adaptor ring, 1 x 68mm x 78mm adaptor ring, 1 x 70mm x 80mm adaptor ring, 1 x 72mm x 82mm adaptor ring, 1 x 75mm x 85mm adaptor ring, 1 x 80mm x 90mm adaptor ring, 1 x M10 pulling spindle, 1 x M12 pulling spindle, 1 x M14 pulling spindle, 1 x M16 pulling spindle.
Made in China
Draper Bearing, Seal and Bush Insertion/Extraction Kit (27 piece), 50092
Draper Bearing, Seal and Bush Insertion/Extraction Kit (27 piece), 50092
Expert Quality, bearing, seal and bush insertion and extraction kit, perfectly designed to aid with accurate and controlled insertion or removal of a host of different bearings, including normal bearings, silent bearings, hydraulic bearings, rubber bearings, bearing bushes, shaft seals etc.
Each kit comprises of 22 adaptor rings and five fine thread puller bars with hex. nut ends, contents of each kit is the following:
1 x 34mm x 44mm adaptor ring, 1 x 36mm x 46mm adaptor ring, 1 x 38mm x 48mm adaptor ring, 1 x 40mm x 50mm adaptor ring, 1 x 42mm x 52mm adaptor ring, 1 x 44mm x 54mm adaptor ring, 1 x 46mm x 56mm adaptor ring, 1 x 48mm x 58mm adaptor ring, 1 x 50mm x 60mm adaptor ring, 1 x 52mm x 62mm adaptor ring, 1 x 54mm x 64mm adaptor ring, 1 x 56mm x 66mm adaptor ring, 1 x 58mm x 68mm adaptor ring, 1 x 60mm x 70mm adaptor ring, 1 x 62mm x 72mm adaptor ring, 1 x 64mm x 74mm adaptor ring, 1 x 66mm x 76mm adaptor ring, 1 x 68mm x 78mm adaptor ring, 1 x 70mm x 80mm adaptor ring, 1 x 72mm x 82mm adaptor ring, 1 x 75mm x 85mm adaptor ring, 1 x 80mm x 90mm adaptor ring, 1 x M10 pulling spindle, 1 x M12 pulling spindle, 1 x M14 pulling spindle, 1 x M16 pulling spindle, 1 x M18 pulling spindle.
The set is in case.
Made in China
Universal ball joint puller, automobile, 23 mm, 50049
Universal ball joint puller, automobile, 23 mm, 50049
Specification:
External clamping width: 23 mm
Clamping depth: 65 mm
Width: 100 mm
Spindle length: 35 mm
Thread dimension: M14 x 1.5
Width across flats: 19 mm
Applicable:
For easy ejection of ball joint bolts, particularly for many cars from the following manufacturers: Audi, BMW, Fiat, Ford, Daimler-Chrysler, Opel/Vauxhall, Nissan, Toyota, VW, Volvo.