ENGINE TIMING TOOLS
Pneumatic Injector Puller Set, 51107
Pneumatic Injector Puller Set, 51107
Designed for the removal of the seized injectors from the cylinder head.
The tool is accompanied by a comprehensive set of adapters, including solenoid screw and fuel feed line adapters, offering versatility and compatibility with a range of injector types.
Use the 5-8Bar air source tool to link the fuel injector and impact and disassemble the particularly tight fuel injector M8, M10, M12, M14, M15, M17 и M19.
Suitable for Bosch, CAT, Cummins, Denso, Delphi, Siemens Common Rail injectors which have solenoid coil or screw connections.
.Made in China
BMW N47/N57 2.0, 3.0 - Chain Drive - Diesel Engine Setting/locking Kit, 50344A
Engine Setting/locking Kit - BMW N47/N57 2.0, 3.0 - Chain Drive, 50344A
Essential tools for timing the BMW N47/N57 2.0 and 3.0 diesel chain drive engines.
Kit includes camshaft setting plate, flywheel locking pin and crankshaft turning tool.
Kit also includes HP pump sprocket retaining tool required during pump removal/replacement applications.
Applicable:
BMW:
116d E81/82/87/88 (08-12),
118d E81/82/87/88 (07-12),
120d E81/82/87/88 (07-12),
123d E81/82/87/88 (07-12),
316d E90/91/92/93 (09-12),
318d E90/91/92/93 (07-12),
320d E90/91/92/93 (07-12),
325d E90/91/92/93 (10-12),
330d/xd E90/91/92/93 (08-12),
520d E60/61 (07-10),
525d F10/11 (10-12),
530d F10/11 (10-12),
530dGT F07 (09-12),
535d F10/11 (10-12),
535dGT F07 (10-12),
730d/Ld F01/02/04 (08-12),
740d F01/02/04 (09-12),
740d xDrive F01/02/04 (09-12),
X1 sDrive 18d E84 (09-12),
X1 sDrive 20d E84 (09-12),
X1 xDrive 18d E84 (09-12),
X1 xDrive 20d E84 (09-12),
X1 xDrive 23d E84 (09-12),
X3 2.0d E83 (07-10),
X3 xDrive 18d E83 (08-10),
X3 xDrive 30d E83 (11-12),
X5 3.0d E70 (10-12),
X5 xDrive 40d E70 (10-12),
X6 xDrive 30d E71/72 (10-12),
X6 xDrive 40d E71/72 (10-12)
Engine Codes:
N47/N47S; D20A, D20B, D20U0, D20O0, D20T0, N57; D30U0, D30O0, D30O1, D30T0
OEM Tools: 11.5.320, 11.6.480, 11.8.740, 11.8.760
Made in China
Diesel Engine Compression Tester Kit, 50762
Diesel Engine Compression Tester Kit, 50762
For cars, trucks and tractors
Included adapters for: GM, Ford, Lincoln, Mercedes Benz, Volvo, Audi, Volkswagen, Isuze, Toyota , CAT, Deere, Cummins and More
Includes all the necessary components to test diesel compression on most diesel fueled trucks, cars and tractors.
Carbon steel construction for long life
Chrome-plated gauge
Swivel-end quick-coupler allows quick and easy connection of adapters
0-1000 PSI/0-70 bar gauge with release valve and 368 mm (14.5”) long hose
1000 PSI maximum pressure
Hose Length: 368mm
Compatible with:
Ford/navistar 6.9/7.3 Liter Engine; Audi, Volvo, Vw, Cummins 5.9 Liter, M-b Cars & Trucks With 24 Mm Ports; V-185, 210, 225, 555, Vt-255, 555; Bacharach Adapter; M-b 18 Mm (prior To 1978); M-b 12 Mm (1978 And Up); Majority Of H-d Tractor Diesel Engines Including Allis Chalmers, Case, Deere, Ford, I. H., Mack, Onan, Waukesha; Cummins V-6, V-8, V-12 Bmw 2.4 Liter, Lincoln (mark-vii) 1984 & 1985, Peugeot 12 Mm/18mm; Chevy Luv 1.8/2.2 Liter, Isuzu 1.8/2.2 Liter, Toyota 1.8 Liter; G. M. 4.3/5.7/6.2/6.5 Liter (turbo); Detroit Diesel 53, 71, 92, 110, 149, V53, V71; Cat D-336, 1674, 1676, 3406, 3408, 3412 (capsule-type Nozzles); Case, Cat, Deere, Waukesha
Included 13 adapters:
Ford/Navistar 6.9/7.3 Liter engine Case, Cat, Deere, Waukesha Audi, Volvo, VW, Cummins 5.9 Liter, M-B Cars & Trucks With 24 MM Ports V-185, 210, 225, 555, VT-255, 555
Bacharach Adapter M-B 18 MM (Prior To 1978) M-B 12 MM (1978 & Up)
Majority Of H-D Tractor Diesel Engines Including Allis Chalmers, Case, Deere, Ford, I. H., Mack, Onan, Waukesha Cummins V-6, V-8, V-12 BMW 2.4 liter, Lincoln (Mark-VII) 1984 & 1985, Peugeot 12 MM/18MM
Chevy Luv 1.8/2.2 Liter, Isuzu 1.8/2.2 Liter, Toyota 1.8 Liter G. M. 4.3/5.7/6.2/6.5 Liter (Turbo)
Detroit Diesel 53, 71, 92, 110, 149, V53, V71 Cat D-336, 1674, 1676, 3406, 3408, 3412 (capsule type nozzles)
Made in China
VAG 1.8L & 2.0L TFSi/TSi - Crankshaft Pulley Holding Tool, 50739
VAG 1.8L & 2.0L TFSi/TSi - Crankshaft Pulley Holding Tool, 50739
Used for holding crankshaft pulley/vibration damper when crankshaft central bolt is loosened or tightened.
Specially shaped & hardened pins help prevent the tool falling out when under load.
Application:
1.8L & 2.0L TFSi/TSi petrol engines found in the VAG vehicles (from 2006 onwards).
Overall length 34" (863 mm)
OEM#: T10355
Made in China
Engine Oil Filling Funnel Set, 50731
Engine Oil Filling Funnel Set, 50731
2 litre funnel with 6 adaptors to fit a wide range of vehicles.
Allows for fast oil filling without spillage or waste.
Great for many late model vehicles with internal baffles.
For pouring oil where access is difficult.
Angled extension and adapters are made of plastic.
Contents:
1 pc 2 liter funnel.
1 pc angled plastic extension.
1 pc bayonet adapter for Audi, BMW, Dodge, Mercedes-Benz, Porsche, Volvo, VW.
1 pc threaded adapter M42x4.5 for Subaru.
1 pc threaded adapter M37x3.0 for Toyota, Lexus, Scion, Pontiac.
1 pc threaded adapter M35x4.0 for Mazda.
1 pc threaded adapter M32x3.5 for Dodge, Honda, Acura, Nissan, Jaguar, Ford.
1 pc bayonet adapter for Toyota and Lexus with 3.0/3.3L V6 engines
Made in China
7 pcs Glow Plug Puller Kit, 50646
7 pcs Glow Plug Puller Kit, 50646
Designed for extracting failed glow plugs.
Contents:
External grip (7.7mm internal Ø ) Includes size 4 (6.0mm) contraction collet.
External grip (6.8mm internal Ø ) Includes size 3 (5.0mm) contraction collet.
Contraction collet: Size 3 (5.0mm).
Contraction collet: Size 2 (3.6mm).
Contraction collet: Size 1 (2.7mm).
T -bar slide hammer/puller.
Internal (expansion collet) puller.
Made in China
Universal Valve Spring Install Remove Tool, 50610
Universal Valve Spring Install Remove Tool, 50610
To remove valve springs and valve stem seals on the vehicle without taking the head off!
Works great in narrow engine bays where space is tight. Huge time saver.
Suits European, American and Japanese cars. Such as Mercedes Benz, BMW, Volvo, Toyota, Mitsubishi, VW, Ford etc.
Especially suitable on BENZ V6 Engine and BMW V8 Engine.
May not work on some S63 engines due to the lower sitting engine.
This kit also caters to engines that require a 14mm spark plug socket (or M12 x 1.25p)
Engines:
Mercedes Benz: M102 / M103 / M104 / M111 / M112 / M113 / M271 / M272
BMW: N42 / N46 / N52 / M52 / M54 / M56 / N62
Toyota / Mitsubishi / VW / Audi, ect.
Just a few vehicles that have actually been tested with, this kit suits many more.
Made in China
Mercedes-Benz 9G-Tronic Transmission - Oil Drain and Refill Set, 50569
Mercedes-Benz 9G-Tronic Transmission - Oil Drain and Refill Set, 50569
Designed for draining and refilling ATF on Mercedes-Benz 9-speed automatic transmissions (type 725.0)
Special design for leak-free and spill-free ATF services
Refill adapter shall be used with an ATF refill pump and tank
OEM №: 725 589 02 90 00, 725 589 00 90 00
Made in China
Renault/Nissan V6 3.0 DCi V9X - Engine timing tool set, 50549
Renault/Nissan V6 3.0 DCi V9X - Engine timing tool set, 50549
Applicable:
Renault: Renault Espace, Renault Vel Satis, Grand Espace 4, Renault Master
Nissan: Nissan INFINITY, Nissan Navara, Nissan Pathfinder (R51)
Engine:
Renault 3.0 DCI, Nissan / Infiniti - 3.0 D
Engine Code: V9X
Made in China
Crankshaft Turning Tool, 50535
Crankshaft Turning Tool, 50535
Used for turning the crankshaft pulley.
With 1/2" drive, 22mm square, and 12mm rotating pivot pin.
Application:
Audi A6 2005 and up
Audi A8 2003 and up
Engine: 6 cylinder 2.4, 3.2L FSI.
OEM №: T40058
Made in China
Fiat 1.4 12V - Engine Timing Tools, 50529
Fiat 1.4 12V - Engine Timing Tools, 50529
Designed specifically to allow the cam and crankshaft to be aligned when setting the engine timing on the 1.4L 12 valve petrol engines found across the Fiat and Lancia ranges from 1995 to 2000.
Designed specifically for the 1.4 12v engine.
Application:
Models:
Fiat 1.4 12v engine, Fiat Brava, Brao, Marea Weekend(95-00)
Lancia Ypsilon
Engine code: 1.4 12v - 182 A3.000, 182 A5.000
Contents:
Camshaft locking tool (OEM Ref 1 860 899 000)
Crankshaft timing tool (OEM Ref 1 860 901 000)
NOTE: The Camshaft locking tool will only fit the OEM camshaft found in the engines codes listed.
Made in China
VAG crankshaft Pulley/Damper Puller, 50506
VAG crankshaft Pulley/Damper Puller, 50506
This removal tool must always be used to separate the vibration damper from the gear wheel of the crankshaft. Working on 4 cylinder common 2.0L, required for the damage free removal of the vibration damper with internal thread.
Applications:
Volkswagen T6/Transporter (from 2017).
Engine: 4 cylinder common rail 2.0L.
OEM №: T50071.
Made in China
Motorcycle Chain Breaker and Riveting Tool, 50402
Motorcycle Chain Breaker and Riveting Tool, 50402
For Breaking / Pressing and Riveting Motorcycle Drive Chains - 520; 525; 530; 532
Tool can be secured using a vice or spanner
Contents 3; 4 and 5mm Pins
Made in China
Alfa Romeo Twin Spark Twin Cam Belt Drive - Petrol Engine Setting/Locking Kit, 50327
Alfa Romeo Twin Spark Twin Cam Belt Drive - Petrol Engine Setting/Locking Kit, 50327
For 1.4, 1.6, 1.8, 2.0 16v Twin Cam - Belt Drive
Contents:
Camshaft setting plates for locking the camshafts in the timed position. The plates are positioned in place of the camshaft bearing caps.
Timing and balance shaft belt tensioner adjusters.
Applicable:
Alfa Romeo Twin Spark:
1.4/1.6 Engines - 145/146/155/156 (96-01)
1.8 Engines - 145/146, (96-01), 155/156 (96-06),
Spider/GTV (98-01):
2.0 Engines - 145/146 (96-01), 147 (01-07), 155/156 (95-02), 166 (98-01)
Spider/GTV (96-03)
1.4/1.6 Engines - 145/146/155/156 (96-01),
1.8 Engines - 145/146, (96-01), 155/156 (96-06), Spider/GTV (98-01),
2.0 Engines - E145/146 (96-01), 147 01-07, 155/156 (95-02), 166 (98-01),
Spider/GTV (96-03)
Plate Applications:
Purple; 1.4, 1.6, Blue; 1.8, 2.0
OEM №: 1825041000, 1825042000, 1822154000, 1822149000
Engine code:
162.01, 321.04, 322.01, 322.05, 323.01, 323.10, 335.03, 372.03, 671.06, 672.04, 676.01
Made in China
64 Pcs Oil Drain Plug Thread Repair Set, 50324
64 Pcs Oil Drain Plug Thread Repair Set, 50324
Application:
For Repairing Sump, Gearbox Drain Plug Tool Set
A comprehensive thread repair kit ideal for repairing sump, gearbox and differential drain plug threads.Used to tap the damaged thread slightly over size, then fit a new drain plug and washer supplied.
Set is suitable for the most popular threads used on cars and light commercial vehicles.
Tap Sizes:
M13 x 1.5, M15 x 1.5, M17 x 1.5, M20 x 1.5mm
Taps material: Chrome Vanadium
Made in China
Fiat Alfa Romeo Lancia 0.9 Twin Air Chain Drive - Engine Timing Tool Set , 50294
Fiat Alfa Romeo Lancia 0.9 Twin Air Chain Drive - Engine Timing Tool Set , 50294
Designed to lock the cam and crankshaft in position to allow the removal and replacement of the timing chain fitted to the new low emission and high economy twin cylinder Fiat engine.
Note: Fiat state that after rebuild these engines should be placed on suitable electronic diagnostic software for the onboard electronic control systems to be reset.
Content:
Pulley Locking Pin
Flywheel Locking Pin
Camshaft Locking Plate
Balancing shaft adjustment tool
Applicable:
Alfa Romeo:MiTo(2012-2015)
Fiat: 500/500C(2010~), Panda(2012~), Punto(2012~)
Lancia: Ypsilon(2011~)
Engine code: 0.9 Twin Air Turbo: 312A2.000
OEM №: 2.000.035.300; 2.000.035.200; 2.000.035.100; 2.000.038.300
Made in China
Injector Nozzle Seat Cleaning Tool - Mercedes-Benz, 50277
Injector Nozzle Seat Cleaning Tool - Mercedes-Benz, 50277
Ideal for cleaning of the nozzle seat, the injector mounting hole and the small aperture leading to the combustion chamber.
Suitable for
Mercedes-Benz CDI engines OM611, OM612, OM613, OM639, OM640, OM642, OM646, OM647, OM648, OM651, OM668, Smart R660.
Also applicable to following engines:
PSA: 2.7 HDI / engine DT17, 3.0 HDI / engine DT20
Chrysler: 2.5 CRD / engine OM664
Toyota: 3.0 D-4D / engine 1 KD-FTV, 2.2 D-4D / engine 2 AD-FHV, 2 AD-FTV
Lexus: 2.2 diesel / engine 2 AD-FHV
Diameter: 7.5 / 17.0 / 19.1mm
Total length: 261mm
Made in China