BRAKE SERVICE TOOLS

Brake Spring pliers, 210-0980-1

Features: for assemble and disassemble the springs of the brake shoes in a drum brake.
Caused Zero damage to the components.
Handle with a socket end for removing spring from anchor stud.
Handle with a grooved end for installing spring on anchor.
Jaw with an unique sunflower-shaped and swivel design allows the operator to grab the surface of the drum brake shoes firmly, and the other jaw hooks thehooking portion of the return spring. And then holding close two handles to assembly or disassemble the spring of the brake shoes.

Made in Taiwan

M9X1.25 Brake Thread Repair Tool Kit, 50400

The repair kit for brake shoe threads is equipped with reinforced drills and ten thread inserts suitable for VAG (Volkswagen, Audi), Opel / Vauxhall, Ford.
Contents:
10pcs Thread inserts
Drill bits
Taps
Tiles (VAG, Opel, Ford)
Hexagon spanner

Made in China

Pneumatic Air Pressure Bleeder Kit, 50121

Features: For professional grade brake and clutch bleeding performance.
Low pressure tank (20-40psi) can be pre-charged with compressed air, making the unit fully portable.
Suitable for use on ABS systems.
Supplied with a range of cylinder adapters for European, Japanese and US vehicles.
Tank Capacity: 5l
Air Inlet: 1/4"

Made in China

Brake fluid DOT-4 is a premium quality, thin-bodied synthetic brake fluid. Especially developed for the new generation of cars with electronic safety systems such as ABS, ASR, ESP, EBD, BAS and all their variants.

Properties

• High wet boiling point
• Very good compatibility with seals and gaskets
• Minimal corrosion tendency
• Very low viscosity, even under very low temperature
• Good resistance against ageing

Specifications

• SAE J1703
• FMVSS 116 DOT4
• ISO 4925

Brake Cleaner 600 ml

BRAKE CLEANER – Special cleaner particularly effective on brakes, clutches and other mechanical components that require to be degreased without rinsing. It rapidly dissolves oil, grease and other dirty substances.
This product is perfect for professional use and also for “do-it-yourself”
Use: it cleans, degreases and lubricates brakes and clutches. But this product is perfect for everything that needs to be degreased. The product doesn’t need to be rinsed and it acts rapidly.

HOW TO USE:
Spray directly on the surface to be cleaned, let it stand a few moments to penetrate. In cause of difficult encrustations, repeat the treatment, and evenly clean with a soft rag. Do not spray on paint or plastic surface.

Made in Italy.

17pcs Brake Caliper socket set, 50963

Used to remove brake caliper bolts when replacing the brake pads.
Material: Cr-V
Contains:
7pcs 3/8"Dr. Hex bit socket: H7x24mm; H7x72mm; H7x92mm; H8x24mm; H9x20mm; H9x50mm; H11x100mm
5pcs 1/2"Dr. Pentagon socket: 10mmx38mm; 10mmx55mm; 12.5mmx38mm; 14mmx38mm; 19mmx38mm
5pcs 1/2"Dr. Special sockets:
10-pt. 11.5mmx38mm
7-pt. 14mmx38mm
10-pt. 15mmx38mm
10-pt. 20mmx38mm
7-pt. AS22mmx38mm
Made in China

VAG - 3 pin brake piston wind back tool, 50161

This is an essential bit of kit when servicing the rear brake calipers on VAG models that feature an electronic park brake.
Once the electronic park brake mechanism has been retracted (software controlled), this 3-pin wind back adaptor is used with a wind back tool to reset the caliper pistons and allow new pads to be fitted.
Applicable: For use on VAG models, Renault Megane and Scenic and Volvo fitted with Electronic Park Brakes
To be used in conjunction with electronic park brake tools but not instead of them
3/8"Dr. and two pin drive option
Outside diameter: 39mm
Pin PCD: 32mm
Pin Diameter: 3mm

Made in China

Tire thread and brake lining gauge, 9B1802

Used to measure the amount of lining remaining on riveted and bonded drum shoes and disc brake pads.
Measures tire thread depth up to 9/16" in graduations of 1/64".
Checks pads without having to remove caliper completely.

Made in Taiwan

Internal snap ring pliers (Long arm), MS9U0102

Special design for the retaining ring in the deep hole.
The most deep size: 56 mm

Made in Taiwan

4" (102 mm) Replacement stone, 50724

Size: 4" (102 mm)

3 pcs set, for Standard engine cylinder hone 50724

Made in China

Brake & Fuel Pipe Fluid Lock Set, 50708

A tool kit for sealing metal brake pipes.
Suitable for clamping and sealing metal flared pipes on brakingsystems, cooling system bypass fuel pipes, AC pipes etc.
3 pcs anodised Aluminium bodies with composite screw.
Sizes:  4.2mm to 10mm.

Made in China

AUDI Q7, S4 1/2" Dr.7 Teeth Brake Caliper Socket 1/2"D 14mm 2006-0014

1/2" dr.7 teeth, 14mm socket QKX3 x 50mmL

Material: CR-MO
For removal and replacement of the retaining
screws on brake caliper on Q7 and other models

Made in Taiwan

3 Pcs Pentagon Brake Socket Tool Set, 50401

Description:
Specialist sockets and bit for use on most Bendix and Girling brakes.
Includes 14mm and 19mm Pentagon Sockets and 10mm Pentagon Bit Socket.
Made from chrome vanadium steel.      
Applicable:
14 mm pentagon socket - Opel / Vauxhall (Astra G, Zafira), Smart Special socket for Girling brakes
19 mm pentagon socket - Peugeot, Renault
10 mm pentagon bit

Made in China

Brake Oil Pipe Staple Tools, 50515

Suitable for steel, cooper and plastic coated brake line with 3/16"(4.75mm) or 1/4"(6.3mm)

Working length: 25mm

Made in China

Brake fluid tester, 50464

For quick and accurate checking of the brake fluid condition.
Identifies the percentage of water in the brake fluid.
 A basic tool for regularly checking the safety of your brakes.
Easy to use.
Color-coded LEDs indicate the water level.
Power supply: 1 x1.5V "AAA" battery
Indications:
Green: Battery OK, no water found.
Yellow: Less than 1% water. No action necessary.
Yellow/Yellow: 2% water found, check regularly.
Yellow/Yellow/Red: 3% water found, change brake fluid.
Yellow/Yellow/Red/Red: 4% water found, the brake fluid should be changed immediately.

Made in China