INSTRUMENTS

Windshield Removal Tool Set, 50220

This universal kit includes all of the specialised tools required to safely and quickly remove windshields from a wide variety of vehicles.
Item is supplied with a rubber gasket knife, cutting wire, two (2) handles, wire feeder tool, trim pad remover and molding release tool.

Set includes:

- Wire: Three strong galvanised steel wires braided to form one wire
- 2 pcs Wire gripping handles: Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held.
- Windshield removal tool: Cuts the vinyl adhesive compound around the windshield.
- Wire feeder tool: Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield
- Trim pad remover: Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.
1PC stainless steel wire with reel.
2PCS Wire gripping handles.
1PC Windshield removal tool
1PC Wire feeder tool
1PC Trim pad remover
1PC Windshield molding release tool

Made in China

21 PCS Universal Brake Caliper Wind Back Kit Suitable for push back and wind back brake pistons. Includes left- and right-handed thrust bolt assemblies. Left-handed thrust bolt required for Ford, Citroen and Renault applications. Adaptor plates with thrust bolt assembly and reaction plate. Helps prevent damage to pistons and seals. Updated adaptor set suitable for a wide variety vehicles. Supplied in carry-case.

Injector Seat and Shaft Cleaning Tool Kit, 50883

It contains a set of tools that ensure effective cleaning of the injector hole and the surface of the bed before inserting the new nozzle. It is used in a wide range of vehicles.
Suitable for Fiat Citroen BMW Peugeot Renault and Mercedes-Benz
Includes:
4 pcs cleaning brushes, brush holder, 3 pcs injector seat mill, cutter guide, sealing ring puller, brush holder extension injector seat and shaft cleaning kit, Note: only use brushes clockwise.
3 pcs conical sleeves for the guide pin 17 / 18.4 / 19 mm.
Guide bolts for sealing seat mills with 19 mm external hexagon head.
3 pcs milling heads:
15 x 19 mm diameter - Mercedes CDI
17 x 17 mm diameter - BMW, Peugeot, Citroen, Renault for Delphi / Bosch injectors
17 x 17 mm diameter 30° bevelled -  Fiat and Iveco sealing ring extractor.
Joint shaft with 6.3 mm (1/4 inch) hex bit holder for drill holders, for brushes with 6.3 mm (1/4 inch) hex bit holder.
2pcs  brush heads with 19.5 mm diameter, 2 pcs long, thin brushes for nozzle needle shaft.
6 pcs guide plugs for closing the nozzle needle shaft with holder for removal and installation.

Made in China

VAG 3.0 / 2.9 TFSI (EA839) - Engine Timing Tool Set, 51039

Features:
Designed to fix the camshafts in position when removing and installing the camshaft timing chains.
Suitable for VAG 6-cylinder 3.0, 2.9 4-valve TFSI (EA839) petrol engines.
Applications:
Audi: A6 (2019-); A7 (2018-); A8 (2019-); Q7 (2019-); Q8 (2019-); S4 (2016-); S5 (2016-); SQ5 (2017-); RS4 (2017-); RS5 (2017-)
VW: Touareg III (2018-)
Engine codes: CWGD; DECA; CZSA; CZSE; DLZA; DCBD; DCBE
OEM No. T40331

Made in China

M16x2.5 Spindle for Press and Pull Sleeve Kit, 50093-4

Pulling spindle with nuts and thrust bearings.

Size: M16x2.5 mm

Length: 450 mm

Material: carbon steel

Made in China

6 Pcs Torx 1/2" Dr. Impact Socket Set, 50067

Materal: Cr-Mo steel
Length: 44 mm
Size: T55, T60, T70, T80, T90, T100

Made in China

35 pcs Universal caliper wind back set, 50064

Applicable: Alfa Romeo / Audi / Austin / BMW / Citroen / Ford / General Motors / Honda / Jaguar / Mazda / mercedes / Mitsubishi / Nissan / Opel / Renault / Rover / Saab / Toyota / Subaru and Volkswagen

• 7mm  Audi, BMW, Ford, Peugeot, Opel, VW
• 8mm  Audi, BMW, Ford, Peugeot, Opel, VW
• 2 бр. ударни челюсти 
• 1-1: с дясна резба
• 1-2: с лява резба
• 2- Citroen: BX (83), BX 16V (88-), Honda
• 3- Audi: A3, A4, A6, A8, BMW, Citroen: XM, XM Turbo CT 20, Xantia, C5, Ford: Mercury, Monarch, Thunderbird, Honda, Jaguar, Mitsubishi, Nissan, Peugeot: 406, 806, Rover, Toyota, VW, Volvo
• 4- Alfa Romeo: 146, Fiat: Uno, Brachetta, Ford: Escort, Mondeo, Honda: Civis, Accord, Rover: 220, Saab: 99L, 9006- Jaguar: S-Type
• 7- Jaguar: S széria, Opel: Astra G, Corsa C, Zafira
• 8- GM Motor
• 9- GM Motor
• 0- GM Motor
• O- Citroen: ZX, XM, Xantia, BX, C3, C5
• 11- Jaguar: S-Type
• 12- BMW Mini
• A- Nissan: Primera, Bluebird, Opel: Astra C, G, Zafira
• B- Ford: Mercury, thunderbird, Lincoln: Continental, Subaru: 1600, 1800, Lim., Kombi, Tourismo 4WD, 1800 GT, GTSXT
• C- Nissan: Primera, Opel: Vectra, Toyota: Avensis
• D- Citroen: BX
• E- Nissan: Maximas
• F- Peugeot: 206
• J- Alfa Romeo: 155, 164, Audi: 80, 9, A3, A4, A6, Citroen: ZX, Fiat: Tipo, Uno, Ford: Sierra, Granada, Thunderdird, Honda CRX, Accord, Prelude, Legend, Jaguar: XJ, Lancia: Dedra, Delta, Thema, Kappa, Nissan: 280 ZX, 300 ZX, Bluebird, Silvia, 100 NX, Primera, 200 SX, Maxima, Peugeot: 306, 309, 405, Renault: Master, Rover: 216, 820, 825 Saab: 9000, Seat: Toledo, Ibiza, Subaru, VW: Passat, Golf, Vento, Transporter, Volvo: S40, V40
• K- Citroen: C5
• K1- Citroen: C5
• K2- Audi: A8, S8
• M- Nissan: Primera
• N- Alfa Romeo: 164, Audi: 200, Coupe GT, 80, 200, Quqttro, 90, Ford: Mondeo, Lancia, VW: Golf Scirocco
• P- Citroen: C3
• R- Ford: Telstar, Laser, Mazda: 323, RX7, 626, 929, Mitsubishi: Galant, Toyota: Celica, Corolla
• Z- BMW, Mini
• H6- BMW: 740, Mini, Opel: Astra G, Zafira
• H7- BMW: 740, Mini, Opel: Astra G, Zafira
• P3.0- Opel: Astra C, Zafira, Corsa C, Vectra
• P5.5- Opel: Astra C, Zafira, Corsa C, Vectra

Made in China

Windshield Removal Tool Set, 318-0185

This universal kit includes all of the specialised tools required to safely and quickly remove windshields from a wide variety of vehicles.

Item is supplied with a rubber gasket knife, cutting wire, two (2) handles, wire feeder tool, trim pad remover and molding release tool.

Set includes:

- Wire: Three strong galvanised steel wires braided to form one wire
- 2 pcs Wire gripping handles: Feed the wire through the hole in the wedge shaft. Loop it through the hole at the top of the shaft. Then back into the handle. Pressing the wedge back into the handle, the wire is held.
- Windshield removal tool: Cuts the vinyl adhesive compound around the windshield.
- Wire feeder tool: Designed for easy and flexible insertion of wire through polyurethane, allowing speedy removal of bonded windshield
- Trim pad remover: Place the tool under the edge of the door upholstery panel and insert it into the fastener as far as possible, then simply pry up.
1PC stainless steel wire with reel.
2PCS Wire gripping handles.
1PC Windshield removal tool
1PC Wire feeder tool
1PC Trim pad remover
1PC Windshield molding release tool

Made in Taiwan.

Renault, Nissan 1.6 Dci - Engine Timing Tool Kit, 51024

Features:
Used to hold the camshaft and crankshaft while setting engine timing.
Suitable for Renault, Nissan 1.6 dCi R9M diesel engines from 2011 onwards.
Also suitable for Mercedes-Benz, Opel / Vauxhall 1.6 R9M diesel engines from 2014 onwards.
Applications:
Renault: Espace V (2015-), Fluence (2013-), Kadjar (2015-), Koleos II (2017-), Megane III (2012-2014), Megane IV (2016-), Scenic / Grand Scenic III (2011-2016), Scenic/Grand Scenic IV (2016-), Talisman (2015-), Trafic III (2014-)
Nissan: NV300 (2016-), Qashqai / Qashqai+2 (2011-2014), Qashqai (2014-2021), X-Trail (2014-)
Mercedes-Benz: C-Class (2014-2018), Vito (2014-)
Opel / Vauxhall: Vivaro-B (2014-2019)
Engine codes: R9M 402, R9M 404, R9M 408, R9M 409, R9M 410, R9M 413, R9M 414, R9M 415, R9M 450, R9M 452, R9M 453, 622.951 (R9M), 626.951 (R9M).
OEM#: MOT 1969 / EN-51248 / 626 589 04 40 00, MOT 1970 / EN-51241 / 626 589 00 15 00

Made in China

M14x2.0 Spindle for Press and Pull Sleeve Kit, 50093-3

Pulling spindle with nuts and thrust bearings.

Size: M14x2.0 mm

Length: 450 mm

Material: carbon steel

Made in China

3/8" Dr. 30pcs Socket set, 3302

Contents:
6-pt. Flank sockets: 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 24 mm
6-pt. Flank deep socket: 8, 9, 10, 12, 13, 14 m
3/8"Dr. 24 teeth Ratchet handle, 80233
3/8"Dr. Universal joint,  80531
3/8"Dr. Extension bars: 75mm, 150mm
3/8"Dr. Spark plug sockets 16, 20.6 mm

Material: Cr-V

Produced by Force, Taiwan

Hydraulic porta power jack, 10 t

 Min. height: 150mm

 Max. height: 470mm

VAG 1.8 / 2.0 TFSI (EA888) - Timing Chain Tensioner Lever, 51007

Allows the timing chain tensioner to be retracted and locked without removing the lower timing cover
Required when replacing the timing chain
Suitable for the following engines / models (TFSI from 2007):
Audi A3, A3 Cabrio, TT, Q3
Seat Alhambra, Altea Freetrack, Exeo, Leon FR, Toledo
Octavia II, IIII Superb (3T), Yeti
Volkswagen Eos, Golf VII, Passat (B6), Passat CC, Passat, Sharan, Beetle, Scirocco, Tiguan
Applicable:
For 1.8 R4 16v TSI / TFSI (EA888):
Audi TT Mk2 (8J), 8P Audi A3, B7 Audi A4, Audi A4 (B8), Audi A5
SEAT Leon Mk2 (1P), SEAT Altea XL
Yeti, Octavia Mk2 (1Z, Ming Rui), Skoda Superb Mk2 (3T)
VW Jetta Mk5 / Sagitar, VW Passat B6, VW Passat CC
For R4 2.0 16v TSI / TFSI (EA888):
VW Golf GTI Mk5; VW Golf GTI Mk6; VW Jetta Mk5, VW Jetta Mk6, VW Passat B6, Volkswagen CC, VW Scirocco, VW Golf GTI Mk6, VW Scirocco, VW Passat B6, Volkswagen CC
Audi A3 (8P), Audi A3 Cabriolet, Audi TT, Audi A4 (B8), Q5, Audi A5, Q5, Audi TT Mk2 (8J), Q3 Audi
Skoda Superb Mk2 (3T), Octavia
SEAT Altea Freetrack SEAT Leon FR, SEAT Exeo
Engine codes (1.8L engines): SADC, ACHD, CDHB, CJEB, CCRDC, CGYA
Engine codes (2.0L engines): CCZA, CDNB, CDNC, CFKA, CCZC, CPSA, CESA, CETA, CCZB, CDND, CCZD

OEM tool: T40243

Length: 480mm

Made in China

M12x2.0 Spindle for Press and Pull Sleeve Kit, 50093-2

Pulling spindle with nuts and thrust bearings.

Size: M12x2.0 mm

Length: 450 mm

Material: carbon steel

Made in China

Door upholstery tack remover 031-A611201

Designed to remove the car door panel. Convenient extended handle.

Made in Taiwan