GARAGE TOOLS AND EQUIPMENT
2 t Scissor Jack, 55065
2 t Scissor Jack, 55065
Features:
Loading capacity: 2 ton
Easy to use and carry. Suitable for all cars.
Collapsed height 105mm, expanded height 380mm maximum.
A sturdy worm gear mechanism prevents these jack from slipping.
Engineered and designed for smooth easy operation and durability.
A device used to extend or extend or position a platform by mechanical means.
Designed mechanism:
This Scissors jack has straight equal-length arms, i.e. the distance from the horizontal-jack-screw attachment point to the scissors-joint load platform. The extension or displacement point motion is achieved applying of force to one of the supports resulting and an elongation of the crossing pattern.
Caution: Always use axle stands to support lifted load. Use of Scissors jack as the only means of long term load support is not recommended.
Color: Blue
Made in China
Computerized Car wheel balancer JH-90E, 51420
Computerized Car wheel balancer JH-90E, 51420
Introduction:
With automatic static balance and dynamic balance, ALU program.
Equipped with external and automatic measuring device. Easy to perate and more accurate measurement.
With variety of balancing program, suitable for different wheel structure.
HTD program, split to hide weight behind spokes.
OPT program. Wheel vs rim optimization. Six foot brake positioning at at unbalanced point, improve the balancing accuracy.
With fault diagnostic systemto check the working statusof key components. Easy to direct and solve the problem.
Liquid cristal dysplay makes operation more intuitive and clear.
Hydraulic shop press, 40 t, 55007
Hydraulic shop press, 40 t, 55007
Capacity: 40 t
Working range: 0 - 1080 mm
N.W.: 210 kgs
5 L Metal Fuel Can, 75086
5 L Metal Fuel Can, 75086
Ideal for the storage of petrol and diesel.
Made from thick 0.8mm steel
Capacity: 5 L
Size: 230 (L) x 115 (W) x 310 (H) mm
Weight: 1.30 kg
Made in China
Door opening protection rubber
Door opening protection rubber
Protects when opening the vehicle door
Size: 300 x 100 mm
Distance between holes: 118 mm
Thickness at widest part: 20 mm
Material: rubber
Made in China
50 ton Hydraulic Shop press, 55063
50 ton Hydraulic Shop press, 55063
Capacity: 50 t
Working range 0 - 1035 mm
N.W.: 230 kgs
G.W.: 245 kgs
Made in China
Tire Chenger JH-706B, 51418
Tire Chenger JH-706B, 51418
Features:
Economical and practical type.
Piston of spade cylinder is high density aluminum casting to prolong its service life.
The clamping jaw is made of precision steel cast which firm and durable.
Enhaned inner box structure can avoid mechanical deformation during working to prolong its service life.
Clamping jaw is equipped with a protective sleeve to provide more comprehensive protection for tires and rims.
Specification:
Power: 1.1 kw
Voltage: 220 V
Max Wheel Diameter: 1070 mm
Max Tire Width: 350 mm (14")
Clamp rim size outside: 9"-21"
Clamp rim size inside: 13"-25"
Pressure bead breaker: 2500 kgs
Max Shaft torquue: 1078 Nm
Working Pressure: 8-10 bar
Level of noise: ≤ 70 dB
N.W.: 188 kgs
G.W.: 223 kgs
4 ton Solid Negel Jack Electro-hydraulic 2-post lift, floor plate + anchors + 4*85 mm Adapters
4 ton Solid Negel Jack Electro-hydraulic 2-post lift, floor plate + anchors + 4*85 mm Adapters
Driving Mode:
●Dual hydraulic cylinders, chain drive
Engagement Release Mode:
●Dual point manual lock release
Arm Assembly:
●Two-stage telescoping lifting long arms
●Three-stage telescoping lifting short arms
Two-stage front and two-stage rear telescopic lifting arms giving the advantage of servicing cars with a small wheelbase. With this, the scope of the hoist obtains convenient functionality for all gauges of passenger cars, vans, mini vans and small trucks.
● Threaded lifting pads
Safety Mechanism:
●Automatic arm lock restraints
●Mechanical safety latch with 5cm interval in each post
●Parachute valve under each cylinder in case of hydraulic hose fracture
●Relief valve to prevent overloading
●Door opening protection rubber
●Up-limit switch
●Synchronization cable
Control System:
●Lifting operation by pressing the “UP” button on motor
●Manual lowering operation by pressing the lever on power pump
Technical Data:
Capacity - 4000 kg
Min. Height - 100 mm
Max. Lifting Height - 2000 mm
Overall Height - 2824 mm
Overal Width - 3499 mm
Width between columns - 2880 mm
Short Arm Lenght - 680 - 1230 mm
Long Arm Lenght - 880 - 1440 мм
Lifting Time - 60s
Lowering Time - 40s
Motor - 220V, 50Hz, 1Ph
Car lift color: Grey
Lifting arm color: Gray
10L Metal Fuel Can, 75087
10L Metal Fuel Can, 75087
Ideal for the storage of petrol and diesel.
Made from thick 0.8mm steel
Capacity: 10 L
Size: 280 (L) x 135 (W) x 410 (H) mm
Weight: 2.320 kg
Made in China
3-stage Threaded lifting pad for Car lift
3-stage Threaded lifting pad for Car lift
Max. Height: 110 mm
Flange Diameter: 50 mm
Made in China
50 t Air hydraulic shop press, 55064
50 t Air hydraulic shop press, 55064
Width: 700 mm
Working range: 0 - 1040 mm
Air pressure: 0.75 – 0.85 MPa (7.5 – 8.5 Bar)
Package size: 2110 х 975 х 315 mm
N.W.: 265 kgs
G.W.: 300 kgs
Made in China