CHEMICALS AND AEROSOLS PRODUCTS
Multifunctions Unblocking 400 ml, S152
Multifunctions Unblocking 400 ml, S152
A penetrating synthetic fluid with a high solvent and releasing power.
Supports the releasing process of bolts, joints, threads, hinges and all other mechanical parts from rust and oxidation.
It also leaves a long lasting waterproof and water repellent protective film.
Technical Specifications:
Aspect Tin-Plate can containing under pressure fluid
Color Light brown
Odour Characteristic of solvent
Relative density at 20°C 0,68 ÷ 0,72 g/ml
Flash point Und .0° C extremely flammable
Pressure at 20°C 4/6 bar
Melting/freezing point < -66°C (liquid base)
Boiling point Around 176°C (liquid base)
Vapor tension > 5 bar (20°C)
Viscosity < 1 cSt - 9 cSt 40°C (oily base)
Solubility Insoluble in water
Operating temperature -50°C / +130 °C c.a.
Flash point 40 °C (liquid base)
Made in Italy
Light zinc 400 ml, Z350
Light zinc 400 ml, Z350
A high molecular weight cold-bed galvanizer that chemically crystallizes to form a long-lasting metallic finish.
Protects all metallic surfaces from oxidation.
It also forms a stable layer that can be painted or left as a final protective layer.
Ideal for finishing, repair of galvanized parts, etc.
400ml PTFE Grease, G007
400ml PTFE Grease, G007
Composed of special high-boiling temperature fluids.
Leaves no residue.
Acts perfectly even at temperatures highter than +250°C.
Low friction coefficient, high chemical inetria, excellent resistance to high loads.
Used on bearings, bushes, conveyor rollers in the steel, glass, ceramic and brick industries.
Produced by Ambro-sol, Italy
Dark zinc 400 ml Z351
Dark zinc 400 ml Z351
Features: Organic galvanizer with a synthetic resin base containing high quantity of pure micronized zinc and aluminium
used to obtain enough light shade color. The high zinc content provides the product an excellent corrosion resistance.
The product can be used either as a finisher or painted over.
Dry PTFE Lubricating agent (L051)
Dry PTFE Lubricating agent (L051)
This spray creates a PTFE dry coat on treated parts.
It doesn’t leave bots and it doesn’t hold dust. Able to resist very high and very low temperatures.
Applicable:
This lubricant goes on dry, is water-repellent, and anti-adhesive. It does not withhold dust and it does not stain.
It forms a dry and flexible layer of PTFE on the treated part that adheres tightly to metal, wood, and plastic, etc.
Temperature-resistant between -80°C/-112°F and +260°C/500°F. It provides protection against corrosion.
Ideal for drive chains, threads, rollers, belts, guides and heavy-duty tools, etc.
How to use:
Shake and spray directly on the surface from a distance of 15-25 cm.
Made in Italy
Inox - Stainless steel spray Z352
Inox - Stainless steel spray Z352
Alkid and silicone resin - based coating that forms a protective layer.
Formulated to remain inalterated over time with exceptional resistance to chemical corrosion and atmospheric agents and good mechanical strenght.
Quick drying coating.
Features:
Aerosol in a 15-bar tin can
Net Content: 400 ml
Heat resistance: + 300 ° C
Color: Inox
Odor: Characteristics of solvent
Relative density at 20 ° C 0.75 - 0.80 g / ml
Flash point <0 ° C
Pressure at 20 ° C 5.0 ± 1.0 bar
Dry zinc residue - 7.5%
Drying time: For dust and fine particles - 10 min.
At touch - 20 min.
In Depth - 22 hours
HIGH TEMPERATURES SPARY PAINT Black Matt/ Black Gloss/ Red/ Alluminium 400 ml
HIGH TEMPERATURES PAINT 400 ml
High Quality Enamel from the Ambro-Sol “Paint” line, this paint resists high temperature and is ideal for painting
surfaces of ovens, stoves, grills, flues. It’s ideal not only for products found at home but the steel industries, auto
body repairman and forge industries.
It is a high quality enamel with a modified silicone resin base, which allows you to renew all surfaces normally exposed to high temperatures. Heat resistant up to 300°C-700°C (check the Technical data sheet). Application: parts of heaters, stoves, ovens, chimney flues, barbecues, fire screens, motorcycle mufflers, etc. don’t expose in direct contact with flames. Important: to obtain an optimal and long lasting result it is necessary for the painted parts to be exposed even if only once, to a temperature of at least 180°C; any less will make the hardening and adhesion of the enamel only partial. Clean carefully the surface before application and shake vigorously the can. After use, it’s advisable to spray for 2/3 seconds with the spray upside down, to avoid the block of the nozzle.
Ceramic Grease 400 ml (G024)
Ceramic Grease 400 ml (G024)
Features:
Grease with special properties, this ideal lubricant is suitable for situations where high temperatures are present: it withstands up to 1200°C, avoiding unpleasant episodes of blocking.
Applicable:
Ceramic-based grease which applies mostly on parts exposed to high pressure or very high temperature (1200°C/2192°F).
It possesses a high lubricating and anticorrosive power, that protects from moisture.
This ceramic-based and metal-free spray eliminates squeaking and creaking. Suitable for ABS and ASR brakes, oxygen sensors, and brake parts in general.
How to use:
Shake and spray directly on the surface from a distance of 15-25 cm. The product could be also be used with a straw that is attached to the cap.
Made in Italy
Lithium Multipurpose grease 400 ml G001
Lithium Multipurpose grease 400 ml G001
This grease is perfect for everyday use and lubrication.
It’s ideal for your car but also for industrial uses.
It has many excellent features, in particular the resistance from water and atmospheric
agents.
A compound of high quality
saponified greases. This grease has a wide range of uses and good
chemical stability. It is water-repellent and has adhesive properties. It
protects against water and it is perfectly stable and resistant to salty
and dirty atmospheres, acid and basic solution and atmospheric
corrosion. Ideal for lubricating, bearing, bushes, hubs, kingpins, guides
and general use on motor vehicles, farming and industrial machinery.
How to use:
Shake and spray directly on the surface from a distance of 15-25 cm.
The product could be also be used with a straw that is attached to the cap.
Made in Italy
400ml Molybdenum Bisulfide Grease, G005
400ml Molybdenum Bisulfide Grease, G005
Superior classic black grease stands out because of its adhesiveness to metals in the most difficult conditions.
High temperature resistant (300°C/572°F).
It features extraordinary mechanical stability and provides excellent protection against oxidation, humidity and corrosion.
Ideal for lubricating both standard and high-load bearings.
Made in Italy
Starter quick starting 200 ml
Starter quick starting 200 ml
Easy starts of diesel engines and gasoline during the winter.
It ensures fast ignition even at very low temperatures.
It prevents wearing on battery and it extends its life.
How To Use:
Spray directly on the air filter or the air intake and then start the engine.
Made in Italy
Brake Cleaner 600 ml
Brake Cleaner 600 ml
BRAKE CLEANER – Special cleaner particularly effective on brakes, clutches and other mechanical components that require to be degreased without rinsing. It rapidly dissolves oil, grease and other dirty substances.
This product is perfect for professional use and also for “do-it-yourself”
Use: it cleans, degreases and lubricates brakes and clutches. But this product is perfect for everything that needs to be degreased. The product doesn’t need to be rinsed and it acts rapidly.
HOW TO USE:
Spray directly on the surface to be cleaned, let it stand a few moments to penetrate. In cause of difficult encrustations, repeat the treatment, and evenly clean with a soft rag. Do not spray on paint or plastic surface.
Made in Italy.
Cooper grease 400 ml, G006
Cooper grease 400 ml, G006
This product is made from super fine foil copper particles and special corrosion inhibitors.
It has protective and lubricating properties at high temperatures.
It is resistant to high temperatures, high adhesion and anti-corrosion, making it ideal wherever there is a strong corrosive environment or heat and can cause irreversible coupling: clips, rings, pins, motors, exhausts, electrical contacts, threaded connections, valves and others.
Ice remover for glass 250 ml, A455
Ice remover for glass 250 ml, A455
Multi-function product that quickly dissolves and removes ice from the windscreen and vehicle windows.
At the same time, it cleans and ensures perfect visibility and ensures the re-formation of ice.
Stringy Adhesive Grease for Chains HQ 400ml, G012
Stringy Adhesive Grease for Chains HQ 400ml, G012
Features:
High performance chain grease.
High-quality product developed and tested for on-and off-road motorcycle racing that provides guaranteed lubrication for extended periods of intense use.
It penetrates links and lubricates pins to ensure elevated output and precision during movement transmissions; it constantly guarantees the highest performance from the transmission mechanical elements.
It protects against water and dust. It reduces wear on the chain, the crown well, the pinion and all mechanical moving parts.