CHEMICALS AND AEROSOLS PRODUCTS

GAS CARTRIDGES 600ml

Multi-purpose waterproof lithium grease – LITOL – 24, 0.800 kgs
DIN 51825 K3K-40

Multi-purpose waterproof lithium grease  is intended for application in friction units of wheel and caterpillar vehicles, industrial and domestic equipment and for ship mechanism of various purpose, operating at temperature range from -40° - +120° C, short-term - up to 130°C

Applicable:
Unified automotive lubricant, in mining and municipal equipment;
To reduce the reproduction of friction of all types of plain and thrust bearings, joints, gears and other transmissions, for use in industrial equipment;
For lubrication when closing units (front car carriers, water pump bearings, etc.)

Packaging: 0.800 kg
Produced by Agrinol, Ukraine

Graphite grease, 0.800 kg.

Calcium grease with added graphite powder
DIN 51825 OGF 2 G-20

Graphite grease is intended for lubrication of hard heavy-loaded mechanisms (open gearboxes, screw joints, guide screws, jacks, springs, etc.).
Lubricant is efficient at the temperatures lower than minus 20°С in springs and other similar mechanisms.

PROPERTIES:
• Temperature range from -20C + 60C;
• Drip temperature, not lower than 77 ° С;
• Micronized graphite allows to protect metal surfaces from dry friction, prevents overheating of parts and protects against rust;
• Excellent water resistance and corrosion protection;
• Very good antiwear properties;
• Workable in highly polluted and humid environment.

Recommended for
• For all heavily loaded industrial mechanisms;
• Slow conveyor bearings;
• Suspensions of special equipment;
• Open gears; threaded connections; chain gears;
• Springs;
• Drill bit supports;
• Metal ropes and heavy-duty exposed metal sliding surfaces;
• In the home - for lubrication of bicycle chains, door hinges, etc.

Packaging: 0.800 kg
Produced by Agrinol, Ukraine

10l Degreaser - concentrate

Highly concentrated alkaline detergent, exellent for washing without sponed or brushing any kind of vehicle.
Basic bicomponent product green yellow carries out a high degreasing action and good detergent action on all types of dirt  — film fraffic remove - grease, stamp from stamps, petroleum and carbonium residues, smog, terriccio ect.
Basic must be used on cars, slabs, chassis, wheels, roulottes, trains, boats ect. It's easy to rinse theough high extensibility of surfactabts contents.
How to use:
Recommended dilution (Litres):
Rre-wash with lightweight mechanical movement: 1:4-5
Normal  cleansing: 1:3-4
Dirt dirty: SG2C 1:2.5-3
Difficult dirt (engines, wheels ect.):1:2
Splash the solution homogenously from the bottom towards the top leave some action.
Instatnt, then rinsing with a cleaner.
Low dilutation avoid prolonged contact with aluminum and its alloys.
In the summer season use the product on a cooled and shadow surface.
Shake well before each collection.
Physicla and chemical characteristics
Color: YELLOW-GREEN
PH: 13
Density: 1,120 g / l
Pack: 10 kg

Made in Italy

Dark zinc 400 ml Z351

Features: Organic galvanizer with a synthetic resin base containing high quantity of pure micronized zinc and aluminium
used to obtain enough light shade color. The high zinc content provides the product an excellent corrosion resistance.
The product can be used either as a finisher or painted over.

Black seal High temperature, A463

High temperature black silicone is designed for engines of old and new generation.
There is a special dispenser that controls the amount of application according to the user's needs, providing a professional result.

Handwash Paste Lavamani P311, 900 g

Lavender handwash compround for general use.

High-quality hand slog with glycerin.

For perfect hand cleanliness.

PU Foam gun

Designed for the application of polyurethane foam.

It is characterized by lightweight, comfortable shape and lowered mechanism.

Precisely, it releases the amount needed to fill the space. It gives a small amount of material.
 

310 ml PENOSIL Premium Aquarium Silicone

After curing completely safe for living organisms
Can be used on surfaces in contact with foodstuffs.
Non-sagging, does not spread in the joint
Usage temperature between +5 °C and +40 °C.
God adherence to various non-porous silicate materials, e.g. glass, bricks, ceramics, enamel, glazed plates and clinker; treated, varnished or painted wood, and plastics such as epoxides, polyesters, polyacrylates, and laminates.
Fast curing.
Great processing properties.

PENOSIL Standard Gunfoam 750 ml

• Good filling properties.
• Good foam for interior and exterior works under normal conditions.
• Good adherence on various building materials.
• Application with foam gun.

Copper Past comes with outstanding anti-corrosion and lubrication properties, is designed to remove the main causes of braking noise as well as avoid the seizing of components. Keeps its properties up to 1100°C and guarantees problem free disassembly of connections after long-term operation. Suitable for brake-system, exhaust, heat exchanger, boiler, turbines, hinges, joints, screws, etc.

Properties

• eliminates squeaks
• long-term corrosion protection
• resistant to hot water, salt water and splash water
• prevents transmission of vibration
• universal application
• protects from welding and seizing
• lubricant and release effect
• high bond strength
• resistant to acceleration forces
• outstanding thermal stability

Application

Anti-Noise during repairs and service of brake pads, as well as corrosion protection and lubrication of components. Lubrication and separation protection before fusion, seizing of components under high thermal load. Clean the parts to be treated and apply an appropriate amount.

Made in: Germany

Dry PTFE Lubricating agent (L051)
This spray creates a PTFE dry coat on treated parts.
It doesn’t leave bots and it doesn’t hold dust. Able to resist very high and very low temperatures.
Applicable:
This lubricant goes on dry, is water-repellent, and anti-adhesive. It does not withhold dust and it does not stain.
It forms a dry and flexible layer of PTFE on the treated part that adheres tightly to metal, wood, and plastic, etc.
Temperature-resistant between -80°C/-112°F and +260°C/500°F. It provides protection against corrosion.
Ideal for drive chains, threads, rollers, belts, guides and heavy-duty tools, etc.
How to use:
Shake and spray directly on the surface from a distance of 15-25 cm.

Made in Italy

Blue bearing grease №158

The grease to be used in frictionless bearings of automotive equipment, needle bearings if cardan joints with unequal angular velocity.
The grease has good antioxidant and mechanical stability.
Temperature range of use -30°C up to 110°C.

Characteristics:
Compliance with classifications NLGI: 1/2
Compliance with classifications DIN 51502: KF1/2K-30

Appearance:
Smooth homogenous ointment from blue to darkblue color
Thickener: Li-K
Dropping point, °С, not less than: 150
Penetration at 25°С (60 double strokes), m * 10-4, within: 265-320
Effective viscosity at 0°С and with average gradient of the strain rate 10 s−1, Pa•s, not more than: 400 (0ºC)
Shear strength, Pa, within:
- At 20°С: -
- At 50°С: 160
Colloid stability, % of secreted oil, not more than: 18
Tribological characteristics on 4 balls machine at (20±5) °С, Н, not less than:
- Welding load: -
- Critical load: 617
- Scuff index: -

Packaging: 0.400 kg
Produced by Agrinol, Ukraine

Multi-purpose waterproof lithium grease LITOL – 24, 0.400 kgs
DIN 51825 K3K-40

Features:
Multi-purpose waterproof lithium grease  is intended for application in friction units of wheel and caterpillar vehicles, industrial and domestic equipment and for ship mechanism of various purpose, operating at temperature range from -40° - +120° C, short-term - up to 130°C

Applicable:
Unified automotive lubricant, in mining and municipal equipment;
To reduce the reproduction of friction of all types of plain and thrust bearings, joints, gears and other transmissions, for use in industrial equipment;
For lubrication when closing units (front car carriers, water pump bearings, etc.)

Packaging: 0.400 kg
Produced by Agrinol, Ukraine

Alcon Anaerobic High Strength Threadlocker 72.710

It is used in bolts, studs and nuts up to 1 "(25 mm) which are not to be dismantled. Generally used in engine studs, cylinder block connection studs, water pump coupling connections and home appliances industry.