FURNITURE LEGS AND WHEELS
Ø50mm Thermoplastic rubber wheel, polypropylene centre, swivel bracket with bolt hole, 383201
Ø50mm Thermoplastic rubber wheel, polypropylene centre, swivel bracket with bolt hole, 383201
Wheel description
Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Swivel bracket with bolt hole
Swivel bracket with bolt hole. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race, with dust protection granted by the particular plate configuration. The king pin is obtained by moulding and duly rivetted.
Wheel Diameter: 50 mm
Width: 18 mm
Overal Height: 66 mm
Plate diameter: 35 mm
Capacity: 40 kgs
Made in Italy
Ø80mm Thermoplastic rubber wheel, polypropylene centre, swivel bracket withstem 386203
Ø80mm Thermoplastic rubber wheel, polypropylene centre, swivel bracket withstem 386203
Wheel description
Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Swivel bracket with stem
Swivel bracket with stem. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race, with dust protection granted by the particular plate configuration. The king pin is obtained by moulding and duly rivetted.
Wheel Diameter: 80 mm
Width: 24 mm
Overal Height: 104 mm
Stem size: M12 mm
Stem lenght: 25mm
Capacity: 70 kgs
Made in Italy
Ø125 Injection moulded TPR rubber wheel, polypropylene centre, 511103
Ø125 Injection moulded TPR rubber wheel, polypropylene centre, 511103
Wheel description
Injection moulded TPR rubber tread. Polypropilene centre.
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Wheel Diameter: 125 mm
Width: 35 mm
Hub bore diametre: 15 mm
Capacity: 50 kgs
Made in Italy
Ø50 Thermoplastic rubber wheel, polypropylene centre, swivel bracket withstem 386201
Ø50mm Thermoplastic rubber wheel, polypropylene centre, swivel bracket withstem 386201
Wheel description
Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Swivel bracket with stem
Swivel bracket with stem. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race, with dust protection granted by the particular plate configuration. The king pin is obtained by moulding and duly rivetted.
Wheel Diameter: 50 mm
Width: 18 mm
Overal Height: 66 mm
Stem size: M8 mm
Stem lenght: 15mm
Capacity: 40 kgs
Made in Italy
Thermoplastic rubber wheel, polypropylene centre, swivel bracket with bolt hole type with front lock, 387203
Thermoplastic rubber wheels, polypropylene centre, swivel bracket with bolt hole type with front lock, 387203
Wheel description
Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Swivel bracket with bolt hole and front lock
Swivel bracket with bolt hole. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race, with dust protection granted by the particular plate configuration. The king pin is obtained by moulding and duly rivetted. The front brake is necessary to lock wheel and top plate rotation.
Wheel Diameter: 80 mm
Width: 24 mm
Overal Height: 104 mm
Plate diameter: 41 mm
Capacity: 75 kgs
Made in Italy
Ø80mm Thermoplastic rubber wheel, polypropylene centre, swivel bracket with bolt hole, 383203
Ø80mm Thermoplastic rubber wheel, polypropylene centre, swivel bracket with bolt hole, 383203
Wheel description
Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Swivel bracket with bolt hole
Swivel bracket with bolt hole. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race, with dust protection granted by the particular plate configuration. The king pin is obtained by moulding and duly rivetted.
Wheel Diameter: 80 mm
Width: 24 mm
Overal Height: 104 mm
Plate diameter: 41 mm
Capacity: 75 kgs
Made in Italy
Thermoplastic rubber wheel, polypropylene centre, fixed bracket, 385203
Thermoplastic rubber wheel, polypropylene centre, fixed bracket, 385203
Wheel description
Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Fixed bracket
Fixed bracket. The fork is made of pressed steel zinc plated finish.
Wheel Diameter: 80 mm
Width: 24 mm
Overal Height: 104 mm
Plate size: 60x60 mm
Capacity: 75 kgs
Made in Italy
Thermoplastic rubber wheel, polypropylene centre, swivel top plate bracket, 384203
Thermoplastic rubber wheel, polypropylene centre, swivel top plate bracket, 384203
Wheel description
Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Swivel top plate bracket
Swivel top plate bracket. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection granted by the particular plate configuration. In brackets for wheels diameter 60/75/100, the king pin is integral with the top plate and duly rivetted. In brackets for wheels diameter 125, the king pin is obtained by moulding and duly rivetted.
Wheel Diameter: 80 mm
Width: 24 mm
Overal Height: 104 mm
Plate size: 60x60 mm
Capacity: 75 kgs
Made in Italy
Thermoplastic rubber wheel, polypropylene centre, swivel bracket with stem with front lock 389203
Wheel description
Grey non-marking thermoplastic rubber wheels, hardness 80 +/-4 Shore A; polypropylene centre
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Swivel bracket with stem and front lock
Swivel bracket with stem. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race, with dust protection granted by the particular plate configuration. The king pin is obtained by moulding and duly rivetted. The front bracke is necessary to lock wheel and top plate rotation.
Wheel Diameter: 80 mm
Width: 24 mm
Overal Height: 104 mm
Stem size: M12 mm
Stem lenght: 25mm
Capacity: 70 kgs
Made in Italy
Injection polyurethane wheel, Polyammide 6 centre, 364302
Injection polyurethane wheel, Polyammide 6 centre, 364302
Wheel description
Injection polyurethane tread; polyammide 6 centre.
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Swivel top plate bracket
Swivel top plate bracket. The plate, the ball rice ring and the fork are made of pressed steel zinc plated finish; swivel actions: double ball greased race with dust protection granted by the particular plate configuration. The king pin is integral with the top plate and duly rivetted.
Wheel Diameter: 50 mm
Width: 18 mm
Overal Height: 66 mm
Plate size: 55х55 mm
Capacity: 55 kgs
Made in Italy
Injection polyurethane wheel, Polyammide 6 centre, 365102
Injection polyurethane wheel, Polyammide 6 centre, 365102
Wheel description
Injection polyurethane tread; polyammide 6 centre.
Plain bearing bore
The plain bearing bore results from a hole in the material forming the centre of the wheel and contains the axle.
Fixed bracket
Fixed bracket. The fork is made of pressed steel zinc plated finish.
Wheel Diameter: 50 mm
Width: 18 mm
Overal Height: 66 mm
Plate size: 55х55 mm
Capacity: 55 kgs
Made in Italy