WELDING MACHIE
200A IGBT MINI Welding machine Elgen Jet Power MINI-200PIS
200A IGBT MINI Welding machine Elgen Jet Power MINI-200PIS
Features:
Inverter IGBT technology make the welder runs in high utilization rate of power.
Low open circuit loss and has a good welding quality.
Suitable for MMA welding of low-carbon steel with kind of welding rod.
The design is a simple and generous.
Using LCD, intelligent multi-function display.
Simple and intuitive operation, suitable for novices.
VRD (voltage reduction device) function on - reduces the no-load voltage to a safe level. This feature meets international safety standards.
Arc force function - dynamic adjustment of the arc impedance for easy ignition and aesthetic stitching.
Hot start function - provides reliable ignition of the electrode by briefly increasing the welding current at the beginning of welding. The increased current guarantees excellent melting and the best welding quality even at the beginning of welding. As a rule, when using the Hotstart function, there is no lack of merging and the seam height is significantly reduced.
Antistick function - prevents the electrode from burning during gluing. Very often at the beginning of welding or at low welding current the electrode can burn and ignite, after which its coating breaks down and cannot be used additionally. In the event that the electrode sticks, the Antistick function automatically reduces the current, thus preventing the electrode from igniting and maintaining its usefulness.
Specification:
Input Voltage(V): 220V-240V
Frequency (Hz): 50/60 Hz
Power Factor: 0.93
No-load Voltage (V): 68 V
Current Range (A): 10-200
Rated Duty Cycle (%):60%
Usable Electrode (mm): 1.6-4.0
Insulation Class: F
Protection Degree: IP21
Machine Weight (kgs): 3.1 kgs
Accessories:
Electrode holder with 2 m cable
Earth clamp with 2 m cable
Welding mask
Brush
The equipment for TIG is not included in the price.
Made in China
200A Inverter IGBT DC MMA/LIFT-TIG Welding machine Shonco welding technology, MMA-200HD, 30210
200A Inverter IGBT DC MMA/LIFT-TIG Welding machine Shonco welding technology, MMA-200HD, 30210
1. Advanced (IGBT) inverter technology and Single PCB structure with high duty-cycle, with switch for MMA/LIFT-TIG/CEL (E6010, E6011 cellulosic electrode), VRD On/Off can be selective, built- in hot-start and Anti-sticking.
2. High efficiency, low consumption, energy saving, more attractive design.
3. Stable performance, with strong compensation capability, resistant to voltage fluctuation.
4. Easy for arc starting less splash, thermostatic control, Automatic over-voltage and over-voltage and over-current protection, fan cooled.
5. Light, compact, easy to operate.
6. Applicable for welding of all kinds of low carbon steel, medium carbon steel and alloy steel. Etc.
7. Support ARC FORCE welding current 0-10A.
8. 35-50mm2 Europe plug.
Technical parameters:
Input Voltage(V): 220V-240V
Frequency (Hz): 50/60 Hz
Rated Input Capacity(KVA): 7.1 kVA
Power Factor: 0.93
No-load Voltage(V): 68 V
Current Range(A): 10-200
Rated Duty Cycle (%):60%
Usable Electrode (mm): 1.6-4.0
Insulation Class: F
Protection Degree: IP21
Weight (kgs): 4.1 kgs
Accessories:
Electrode holder with 2 m cable
Earth clamp with 2 m cable
Welding mask
Brush
The equipment for TIG is not included in the price.
Price for a torch for argon welding: BGN 78.
Made in China
200A Inverter IGBT MCU PULSE TIG/MMA Welding machine Shonco Welding technology, 30206
200A Inverter IGBT MCU PULSE TIG/MMA Welding machine Shonco Welding technology, 30206
1). Adopt High performance 32-bit MCU digital technology, and IGBT & advanced PWM inverter technology,
3PCB structure with high duty cycle, suitable for professional welding and easy to repair.
2). Multi-function for precision welding, DC MMA, DC TIG, DC PULSE TIG, and 10 Channels customized
Program Store to convenient for operating.
3), Easy-to-user interface, Digital set of Pre-Gas Time, Start Current, Up Slope and Down Slope Time, Finish
Current Level and Post Gas Time with the choice of 2T or 4T trigger function allows controlling the start and
finish of the weld process at a professional level. Digital Pulse Frequency Control gives full parameter setting
of Peak Current, Base Current, Pulse Frequency and Pulse Width, allowing control of heat input into the work
for penetration control and minimizing distortion, gain the ideal balance.
4). Unique housing design with high-strength plastic All-around corner protection, innovative human
engineering handle.
5). Customized Company Name and Logo can show on the true color magic and friendly display with impact
resistance.
6). Excellent welding performance, special for thin plate welding.
7). Good Arc-stiffness and concentrated heat; Stable Arc without spatter, good shaping and less deformation.
8). Weld with various materials such as steel, stainless steel, titanium, cooper, nickel and their alloys.
9). With Wide Voltage Function, work well and stably between voltage 150V-270V or together with Generator.
10). With foot pedal control and automatic detection, switch function, Perfect when doing pipe welding.
pedal control can be optional.
Technical parameters:
Model: MCU TIG-200DP LCD
Input Voltage(V): 220V-240V
Rated input current(A): 26/40.6 A
Rated input power(KW): 4.6/7.2 kW
Current range(A): 5-200 A
No load voltage(V): 63 V
Rated Duty Cycle (%): 60%
Insulation Class: F
Protection Degree: IP21S
Net Weight(Kgs): 7 kgs
Accessories:
TIG-26 Torch with 4 m cable
Electrode holder with 2 m cable
Earth clamp with 2 m cable
Made in China
Leather welding gloves
Leather welding gloves
Made of high quality soft leather. Provide protection of the hands from burns and injuries.
Gloves are used in welding activities.
Size: 11"
0.9mm 1kg Flux Cored Welding Wire Without Gas For MIG Welding
0.9mm 1kg Flux Cored Welding Wire Without Gas For MIG Welding
Premium quality, all position, flux-cored (gasless) welding wire is for general purpose MIG welding of mild steel.
Self-shielded flux cored wire for lap and fillet welds of mild and medium tensile steels not exceeding 510MPa.
All-positional welding of single pass automatic and semi-automatic fabrication.
This Flux Cored Weld Wire can be applied for aluminized steel and galvanized steel from 1.2 to 5.0mm.
Smooth arc action, full slag coverage, easy slag removal.
Ideal for general fabrication & structural work requiring no impact properties.
Can be welded using DCEN polarity.
Suitable for a variety of applications such as prefab, building fabrication, tanks, ornamental iron, farm implement repairs, and general fabrication.
Oxygen / LPG Cutting nozzle 5-10 mm
Oxygen / LPG Cutting nozzle 5-10 mm
Cutting range: 5-10 mm
BEST SALE! 250A 3 in 1 Inverter DC IGBT MCU MIG/MMA/LIFT-TIG Welding Machine Shonco Welding technology, 30205
250A 3 in 1 Inverter DC IGBT MCU MIG/MMA/LIFT-TIG Welding Machine Shonco Welding technology, 30205
1).Adopt High performance 32-bit MCU digital technology and IGBT & advanced PWM inverter technology.
2). DC MIG, Lift-TIG, MMA, 2T/4T, VRD, Support Spool Gun and multi-process functions, adjustable inductance, burn-back, ARC force and hot start, 5Kgs spool holder with Inching wire function, easy to install welding wire.
3). Outstanding welding performance, especially for thin plate welding.
4). Easy-to-user interface, Synergic Home Function automatically manages ideal voltage and wire feed speed
while only adjusting welding current; dynamic control Digital display with very simple operations.
5). Preset synergic database, with special aluminum sheet expert database, 0.6-0.8-1.0 mm different welding wire can be selective, 100% Co 2,80% Argon + 20% Co2 and gasless different mode can be selective. With these super functions and can let user without any experience also can operate machine very well only need 1 minute.
6). MIG welding voltage and wire speed also can be manual setting for skilled user.
7). Unique housing design with high-strength plastic All-around corner protection. Innovative human engineering handle.
8). Premium 35-50 mm2 cable connector, and easy to change polarity conversion, can suit Solid wire (Gas welding) or Flux wire (Gasless welding).
9). With Wide Voltage Function, work well and stable between voltage 150 V-270 V or together with Generator.
10). Compact, lightweight, little splash, portable, Intelligent Protection, over-voltage, low-voltage, over-current, over-heat etc.
11). Spool gun can be optional.
Technical Data:
Model: MCU MIG-250
Rated input Voltage (V): 220 V – 240 V
Rated input power (KVA): 7.2 KVA
Current range (MMA/TIG) (A): 10~200 A
Current range (MIG) (A): 30~230 A
No-Load voltage (V): 60V
Wire Feed speed (m/min): 1.5~16
Wire diameter (mm): 0.6/0.8/0.9/1.0 mm
Rated Duty Cycle (%): 60 %
Frequency (Hz): 50/60Hz
Efficiency (%): 85%
Pre/Post Flow Time (S): Preset
Power Factor: 0.75
Protective class: IP21S
Weight (Kg): 16 kgs
Accessories:
15AK Torch with 3 m cable
Electrode holder with 2 m cable
Earth clamp with 2 m cable
3 m Gas hose
User manual see in next video
Made in China
Inverter IGBT Plasma cutter Shonco Welding technology - CUT-50HL, 30212
Inverter IGBT Plasma cutter Shonco Welding technology - CUT-50HL, 30212
1). Advanced (IGBT) inverter technology and Three PCB structure with high duty-cycle.
2). Post gas time can be adjusted to better cutting performance and save gas.
3). With switch 2T/4T suitable for different cutting mode.
4). Touch Arc starting cutting.
5). Easy to cut thick metal plate in a fast and economical way.
6). High cutting speed, 2 times faster than oxy-cutting. Narrow cutting gap, smooth cutting surface, small
distortion.
7). Widely use for cutting stainless steel, copper, steel and aluminum, etc.
Technical Data:
Max Cutting thickness(mm): 12 mm
Input Voltage(V): 220 V - 240 V
Frequency (Hz): 50/60 Hz
No load voltage(V): 230 V
Input capacity (KVA): 6.3 kVA
Current range(A): 10-45
Rated Duty Cycle (%): 60%
Insulation Class: F
Starting arc: Contact
Protection Class: IP21
Power factor: 0.93
Weight (Kgs): 8 kgs
Welding mask helmet 30701
Welding mask helmet 30701
Filter Size: 110mm × 90mm × 9mm
Active Viewing Area: 90 mm × 40 mm
Light Shade: DIN4
Dark Shade: DIN9 -13
Way to shift Dark State: Inner Control, Stepless shift
Switching Time: 1 / 10000S
Sensitivity Adjustment: Stepless Control
Delay Time: 0.1S ~ 0.8S
Power Supply: lithium battery & solar powered
Rated Capacity of Lithium Barrtery:600mAh
Operating Temperature: -10 ℃~ 65 ℃
Sensors to Weld Arc: 2
Mask Material:PA / PP
Protect Grade against UVB: DIN15
Grinding: No
Test: No
Low battery: YES
Inside Protect shelter: 104mm × 47.5mm × 1mm
Outside Protect Shelter: 109mm × 89mm × 1mm
Anti spatter spray
Anti spatter spray
Description
TBi anti spatter spray significantly reduces the adhesion of welding spatter to metal parts. If the spray is applied on the torch head regularly, the life of consumables is prolonged and clean-ing of the torch simplified. The spray may also be applied to the work piece. After welding, spatter can easily be brushed off, the weld looks cleaner.
The anti-stick property of the spray will persist even with high temperatures. The spray is suitable for parts that will be coated later, thorough cleaning and previous tests are necessary.
Contact Tip holder - difuser M6x42 TB 150
Contact Tip holder - difuser M6x42 TB 150
Gas Nozzle Holder with Nozzle Spring for MIG/MAG Welding Torch Contact Tip Holder of MB 15AK Welding Gun
Specifications:
Material: Copper
Model: MB15AK
Applicable: MB 15AK MIG welding torch.
Product length:42mm / 1.65''
Argon regulator
Argon regulator
This gas regulator has reasonable and compact structure, and has gas pressure and flow indicator.
The safety valve can secure and personal safety of operator, which has stable performance and is solid and durable.
The gas regulator is applicable to liquid CO2 gas and mixed gas (CO2+agron).
Specification:
Voltage of heating pipe: 36V; 110V; 220V; 240V
Power of heating pipe: 120W; 150W; 210W; 190W
Applicable gas: Liquid CO2 gas for welding and Mixed gas for welding MAG (Ar+CO2)
Input pressure:
Liquid CO2 gas for welding : ≤ 11.8 Mpa (120 kgf/cm2)
Mixed gas for welding MAG (Ar+CO2): ≤ 14.7 Mpa(150 kgf/cm2)
Output pressure:
0.35±0.05MPa(0.5±0.5kgf/cm2)
Inlet thread: G 5/8-14, 0.86-14 Others
Outlet thread: M12x1, M16x1.5 Others
Gas Flow: 0-25 L/min, 0-30 L/min
Rated load persistency rate: 100%
Operation pressure of safety valve: 0.65 – 0.8MPa (i.e. 6.5 – 8 kgf/cm2)
BEST SALE! 250A Inverter IGBT MCU AC/DC PULSE TIG/MMA Welding machine, steel panel Shonco Welding technology, 30201
250A Inverter IGBT MCU AC/DC PULSE TIG/MMA Welding machine, steel panel Shonco Welding technology, 30201
Features:
1). Adopt High performance 32-bit MCU digital technology, and IGBT & advanced PWM inverter technology, 3PCB structure with high duty cycle, suitable for professional welding and easy to repair.
2). Multi-function for precision welding, DC MMA, DC TIG, DC PULSE TIG, AC TIG, AC PULSE TIG, and 10 Channels customized Program Store to convenient for operating.
3). Easy-to-user interface, Digital set of Pre-Gas Time, Start Current, Up Slope and Down Slope Time, Finish Current Level and Post Gas Time with the choice of 2T or 4T trigger function allows controlling the start and finish of the weld process at a professional level. Digital Pulse Frequency Control gives full parameter setting of Peak Current, Base Current, Pulse Frequency and Pulse Width, allowing control of heat input into the work for penetration control and minimizing distortion, gain the ideal balance between cleaning the aluminum surface of oxide.
4). Unique housing design with high-strength plastic All-around corner protection, innovative human engineering handle.
5). Customized Company Name and Logo can show on the true color magic and friendly display with impact resistance.
6). Selectable Multi-Waveform output to meet different job:
Sine wave, Square wave, trapezoidal wave and triangular wave.
7). Excellent performance for aluminum and magnesium welding, special for thin plate welding.
8). AC balance (15-50%) control monitors the oxide and helps better cleaning during Aluminum welding.
9). Good Arc-stiffness and concentrated heat; Stable Arc without spatter, good shaping and less deformation.
10). Weld with various materials such as Aluminum, magnesium, steel, stainless steel, titanium, cooper, nickel
and their alloys.
11). With Wide Voltage Function, work well and stably between voltage 150V-270V or together with Generator.
12). Creative SMART Fan can be optional to improve fan lifetime and save energy.
Fan stop running and turn into dormancy system when welding suspend time over 1 minute, and the fan
automatically rerun when welding start.
12). With foot pedal control and automatic detection, switch function, Perfect when doing pipe welding.
pedal control can be optional.
13). Water cooling system and big volume water cooler can be optional.
Technical Data:
Model: MCU TIG-250D with metal panel
Input Voltage(V): 220V-240V
Frequency (Hz): 50/60 Hz
Power Capacity (KVA): 8.5 kVA
Max Input Current (A): 34 A
TIG/MMA Current range(A): 5~230A / 10~200A
ARC Force Current range(A): 0-100A
No-load Voltage(V): 65 V
Rated Duty Cycle (%): 60%
Pulse Frequency (Hz): 0.5~1000 Hz
Pulse Duty (%):10~100 %
AC TIG Frequency (Hz): 0.5~250 Hz
AC TIG Balance (%):15~50 %
Up/Down Slope Time(S): 0.0~15.0 S
Pre/Post Flow Time(S): 0.1~15.0 S
Basic current range (%): 10-90 %
Remote control: YES
Memory Function: YES
Efficiency (%): 85%
Power Factor: 0.93
Protection Class(S): IP23
Insulation Class: F
Weight (Kg): 14 kgs
Accessories:
TIG-26 Torch with 4m cable
Electrode Holder with 2m cable
Earth clamp with 2m cable
3m Gas hose
Operation manual see in next video